Pelco FTV160S1ST, FTV160S1FC, FRV320S1ST, FRV320S1FC, FTV320S1ST Specsheet
...
PRODUCT SPECIFICATION
transmission & power
FTV160/FRV160, FTV320/FRV320 Fiber Transmitter and Receiver
16- OR 32-CHANNEL DIGITALLY ENCODED VIDEO
Product Features
• 10-Bit Digitally Encoded Video for High-Quality Multichannel Video
Transmission over a Single Fiber
• Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
• Exceeds All Requirements for EIA RS-250C Short-Haul
Transmission Specifications
• Compatible with NTSC, PAL, or SECAM Video Standards
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Laser Diode for Transmission of Optical Signals
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Rack-Mountable Modular Design
The FTV160/FRV160 and FTV320/FRV320 fiber transmitter and
receiver transmit 16 or 32 channels of video, respectively, over one
optical fiber. All models support single-mode fiber distances up to
54 km (33.6 mi).
The FTV160/FRV160 and FTV320/FRV320 plug-and-play design
ensures ease of installation by requiring no electrical or optical
adjustments. All models are shipped rack-mounted in the
EURACK/USRACK chassis.
3216
FTV160S1ST
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3920 / REVISED 7-19-12
TECHNICAL SPECIFICATIONS
MODELS
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Single Mode (9/125 µm)
FTV160S1ST FRV160S1ST ST 1 1310 nm 18 dB 54 km (33.6 mi)
FTV160S1FC FRV160S1FC FC 1 1310 nm 18 dB 54 km (33.6 mi)
FTV320S1ST FRV320S1ST ST 1 1310 nm 18 dB 54 km (33.6 mi)
FTV320S1FC FRV320S1FC FC 1 1310 nm 18 dB 54 km (33.6 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
*Distance may be limited by optical dispersion.
Maximum
Transmission
Distance*
VIDEO
Number of Channels 16 or 32
Video Input/Video Output 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM
Overload >1.5 Vp-p
Bandwidth 10 to 6.5 MHz per channel
Differential Gain <2%
Differential Phase <0.7°
Tilt <1%
Signal-to-Noise Ratio 67 dB at maximum optical loss budget
Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to
maintain 6 Mhz bandwidth
ELECTRICAL
MTBF >100,000 hours
Input Power
FTV/FRV160 90 to 264 VAC at 10 W maximum
FTV/FRV320 90 to 264 VAC at 20 W maximum
Rack Power Supply Output 9 VDC at 6.5 A
Fusing 1.25 A slow blow (rack power supply; plug-in
modules are individually electronically fused)
Current Protection Automatic resettable solid-state current
limiters
Circuit Board Meets IPC standards
LED Indicators Video, Link, Power
MECHANICAL
Connectors
Optical ST or FC
Power Terminal block
Video BNC (gold-plated center pin)
GENERAL
Dimensions 48 × 19 × 15 cm
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Unit Weight
FTV160/FRV160 4.0 kg (8.8 lb)
FTV320/FRV320 5.3 kg (11.7 lb)
Shipping Weight
FTV160/FRV160 5.08 kg (11.2 lb)
FTV320/FRV320 6.40 kg (14.1 lb)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
†
At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
(19" D × 7.5" W × 6" H)
†
RECOMMENDED MOUNTS
EURACK 4 RU rack accessory with European power
USRACK 4 RU rack accessory with North American
supply
power supply
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the prope rty of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...