Pelco FRV20S2ST, FRV20S2FC, FRV20M2ST Specsheet

PRODUCT SPECIFICATION

FRV20 Fiber Receiver

2-CHANNEL DIGITALLY ENCODED VIDEO

Product Features

• Accepts Two 10-Bit Digitally Encoded Video Channels over

Tw o Fi b er s

• Compatible with FTV10 and FTV10M Fiber Transmitters

• Multimode Fiber Support for Distances up to 3 km (1.9 mi)

• Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)

• Exceeds All Requirements for EIA RS-250C Short-Haul Transmission

Specifications

• Compatible with NTSC, PAL, or SECAM Video Standards

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Voltage Transient Protection on All Power and Signal

Input/Output Lines

• LED Status Indicators for Monitoring All Critical

Operating Parameters

• Stand-Alone or Rack-Mountable Modular Design

transmission & power

FRV20S2ST

The FRV20 fiber receiver accepts two channels of video over two optical fibers. The FRV20 receiver is compatible with the FTV10 and FTV10M transmitters. Each of the two transmitters can send a single independent video channel to one FRV20 receiver.

The FRV20 receiver is available in multimode and single-mode versions. When using single-mode fiber, the FRV20 receiver and compatible transmitter offer an optical power budget of 23 dB and provide a transmission distance of up to 69 km

The FRV20 plug-and-play design ensures ease of installation by requiring no electrical or optical adjustments. Modular in design, FRV20 units can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required).

For stand-alone and wall mount installations, external power is required for the FRV20 units. The units can be powered with the recommended FEXTPS fiber external power supply.

(42.9 mi).

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3917 / NEW 6-7-12

TECHNICAL SPECIFICATIONS

MODELS

Receiver

FRV20M2ST FTV10M1ST ST 2 1310 nm 16 dB 3 km (1.9 miles)

FRV20S2ST FTV10S1ST ST 2 1310 nm 23 dB 69 km (42.9 miles)

FRV20S2FC FTV10S1FC FC 2 1310 nm 23 dB 69 km (42.9 miles)

Note: This product requires a fiber installation with a minimum 30 dB connector return loss.

Compatible Transmitter

Fiber Optical

Connector Type

Number

of Fibers

Multimode (62.5/125 µm)

Single Mode (9/125 µm)

Wavelength

Optical Power

Budget

Maximum

Transmission

Distance

VIDEO

Number of Channels 2 Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM Number of Input Channels 2 Overload >1.5 Vp-p Bandwidth (minimum) 5 to 10 MHz Differential Gain <2% Differential Phase <0.7° Tilt <1% Signal-to-Noise Ratio >67 dB typical at maximum optical loss Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to

maintain 6 Mhz bandwidth

ELECTRICAL

Power

Surface Mount 8 to 15 VDC at 2 W

Rack Mount Provided by rack MTBF >100,000 hours Current Protection Automatic resettable solid-state current

limiters Circuit Board Meets IPC standards LED Indicators Video, Link, Power

MECHANICAL

Connectors

Power Terminal block Optical ST or FC Video BNC (gold-plated center pin)

Number of Rack Slots 1

CERTIFICATIONS/RATINGS*

• CE, Class A

• FCC, Class A

• UL/cUL Listed

•C-Tick

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards

*At the time of this printing, all certifications are pending. Please

consult the factory, our Web site (www.pelco.com), or the most recent B.O.S.S.

update for the current status of certifications.

RECOMMENDED ACCESSORIES

EURACK 4 RU rack accessory with European power

USRACK 4 RU rack accessory with North American

FEXTPS Fiber External Power Supply with multiple

supply

power supply

plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output

GENERAL

Dimensions 15.5 × 13.5 × 2.8 cm

(6.1" D × 5.3" W × 1.1" H) Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Relative Humidity 0 to 95%, noncondensing Unit Weight 0.38 kg (0.85 lb) Shipping Weight 0.90 kg (2.00 lb)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the prope rty of their respective companies.

Product specifications and availability are subject to change without notice.