Pelco FTD4S1ST, FRD4S1ST, FRD4S1FC, FRD4M1ST, FTD4M1ST Specsheet
PRODUCT SPECIFICATION
transmission & power
FTD4/FRD4 Fiber Transmitter and Receiver
4-CHANNEL BIDIRECTIONAL DATA
Product Features
• 4 Bidirectional Data Channels Support RS-232, RS-422,
RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
• Multimode Fiber Support for Distances up to 3 km (1.9 mi)
• Single-Mode Support for Distances up to 69 km (42.9 mi)
• Laser Diode for Transmission of Optical Signals
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
FTD4S1ST
The FTD4/FRD4 fiber transmitter and receiver provide transmission
of four bidirectional data channels over one optical fiber in a two-slot
wide design. The FTD4 transmitter and FRD4 receiver can be used
with multimode or single-mode optical fiber. When using
single-mode fiber, the FTD4/FRD4 transmitter and receiver offer an
optical budget of 23 dB and provide a transmission distance of
69 km (42.9 mi).
The FTD4/FRD4 plug-and-play design ensures ease of installation by
requiring no electrical or optical adjustments. Modular in design,
FTD4 and FRD4 units can be rack-mounted using the EURACK/
USRACK chassis, or stand-alone modules can be placed on a desktop
or mounted to a wall (wall mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTD4/FRD4 units. The units can be powered with
the recommended FEXTPS fiber external power supply.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3914 / NEW 6-7-12
TECHNICAL SPECIFICATIONS
MODELS
Transmitter
FTD4M1ST FRD4M1ST ST 1 1310/1550 nm 16 dB 3 km (1.9 mi)
FTD4S1ST FRD4S1ST ST 1 1310/1550 nm 23 dB 69 km (42.9 mi)
FTD4S1FC FRD4S1FC FC 1 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
Compatible
Receiver
Fiber Optical
Connector Type
Multimode (62.5/125 µm)
Number
of Fibers
Single Mode (9/125 µm)
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance
DATA
Number of Channels 4
Data Communication
Maximum Baud Rate 250 Kbps
Operating Mode Simplex or full-duplex
Bit Error Rate <1 in 10-
RS-232, RS-422, and RS-485 (2-wire/ 4-wire),
Manchester, and Bi-Phase
9
at maximum optical loss budget
ELECTRICAL
Power
Surface Mount 8 to 15 VDC at 4 W
Rack Mount Provided by rack
Current Protection Automatic resettable solid-state current
LED Indicators Received Data, Transmitted Data, Optical
MTBF >100,000 hours
Circuit Board Meets IPC standards
limiters
Carrier Detect
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Data Terminal block
Number of Rack Slots 2
GENERAL
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0% to 95%, noncondensing
Dimensions 15.5 × 13.5 × 5.6 cm
Unit Weight 0.5 kg (1.15 lb)
Shipping Weight 0.9 kg (2.00 lb)
(6.1" D × 5.3" W × 2.2" H)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
USRACK 4 RU rack accessory with North American
FEXTPS Fiber External Power Supply with multiple
supply
power supply
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the prope rty of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...