Pelco FTD1M1ST, FRD1S1FC, FRD1M1ST, FTD1S1ST, FTD1S1FC Specsheet
PRODUCT SPECIFICATION
transmission & power
FTD1/FRD1 Fiber Transmitter and Receiver
SINGLE-CHANNEL BIDIRECTIONAL DATA
Product Features
• Bidirectional Data Channel That Supports EIA RS-232C/D,
RS-422/RS-485 (2-wire/4-wire) with Tri-State, Manchester, and
Bi-Phase Communication
• Multimode Fiber Support for Distances up to 4 km (2.5 mi)
• Single-Mode Support for Distances up to 69 km (42.9 mi)
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Laser Diode for Transmission of Optical Signals
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
FTD1M1ST
The FTD1/FRD1 fiber transmitter and receiver provide transmission
of bidirectional data over one optical fiber. The FTD1 transmitter and
FRD1 receiver can be used with multimode or single-mode optical
fiber. When using single-mode fiber, the FTD1/FRD1 transmitter and
receiver offer an optical budget of 23 dB and provide a transmission
distance of 69 km.
The FTD1/FRD1 plug-and-play design ensures ease of installation by
requiring no electrical or optical adjustments. Modular in design,
FTD1 and FRD1 units can be rack-mounted using the EURACK/
USRACK chassis, or stand-alone modules can be placed on a desktop
or mounted to a wall (wall mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTD1/FRD1 units. The units can be powered with
the recommended FEXTPS fiber external power supply.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3913 / NEW 6-7-12
TECHNICAL SPECIFICATIONS
MODELS
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Multimode (62.5/125 µm)
FTD1M1ST FRD1M1ST ST 1 in, 1 out 1310/1550 nm 16 dB 4 km (2.5 mi)
Single Mode (9/125 µm)
FTD1S1ST FRD1S1ST ST 1 in, 1 out 1310/1550 nm 23 dB 69 km (42.9 mi)
FTD1S1FC FRD1S1FC FC 1 in, 1 out 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: The unit can be used for transmission of RS-232 or RS-422, but not simultaneously.
Maximum
Transmission
Distance
DATA/ELECTRICAL
Number of Channels 1
Data Communication RS-232, RS-422, and RS-485 (2-wire/4-wire)
with Tri-State, Manchester, and Bi-Phase
Maximum Baud Rate 250 Kbps
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <1 in 10
-9
at maximum optical loss budget
Power
Surface Mount 8 to 15 VDC at 2 W
Rack Mount Provided by rack
MTBF >100,000 hours
Current Protection Automatic resettable solid-state current
limiters
Circuit Board Meets IPC standard
LED Indicators Power, Data In, Data Out, Link, Loop Back
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Data Terminal block
Relay Terminal block
Number of Rack Slots 1
GENERAL
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Dimensions 15.5 × 13.5 × 2.8 cm
(6.1" D × 5.3" W × 1.1" H)
Unit Weight 0.34 kg (0.75 lb)
Shipping Weight 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
USRACK 4 RU rack accessory with North American
FEXTPS Fiber External Power Supply with multiple
supply
power supply
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the prope rty of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...