Page 1
PRODUCT SPECIFICATION
ONE
VIDEO
OUTPUT
FT85011A
TRANSMITTER
ONE
VIDEO
INPUT
DATA
DATA
ONE
FIBER
SINGLE-CHANNEL VIDEO
AND BIDIRECTIONAL DATA APPLICATION
FR85011A
RECEIVER
SINGLE-CHANNEL VIDEO
AND COAXITRON DATA APPLICATION
ONE
VIDEO
OUTPUT
ONE
VIDEO
INPUT
COAXITRON
DATA
COAXITRON
DATA
ONE
FIBER
FT85011A
TRANSMITTER
FR85011A
RECEIVER
• Stand-Alone and Rack-Mountable Modular Design
• LED Indicators for Monitoring of Signal Status, Laser Status,
Data Activity, and Operating Power
video transmission
FT85011A/FR85011A Fiber Transmitter and Receiver
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO WITH BIDIRECTIONAL DATA
Product Features
• 8-Bit Digitally Encoded Video for High-Quality Video Transmission
over a Single Fiber
• Bidirectional Data Channel That Supports RS-232, RS-422, RS-485
(2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron
Communication
• Patent-Pending Transmission Technology Allowing Coaxitron Control
at Full-Distance Capabilities
• Integrated Wavelength Division Multiplexing (WDM) in a
Single Fiber
• Multimode Fiber Support for Distances up to 6 km
• Single-Mode Fiber Support for Distances up to 46 km
• Exceeds All Requirements for the RS-250C Medium-Haul
Transmission Specification
• Compatible with NTSC, PAL, and SECAM Video Standards
• Meets NEMA TS 2 and Caltrans Traffic Signal Control Equipment
Environmental Standards
• No Performance Adjustments Required
• 12 VDC or 24 VAC Power Supply
Available in multimode and single-mode versions, the
FR85011A
fiber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional
data channel over one optical fiber. In addition, patent-pending
technology provides the solution for allowing Coaxitron
zoom (PTZ) control data to be transmitted the full distance of the fiber
(up to 6 km for multimode fiber and up to 46 km for single-mode fiber).
When using single-mode fiber, the
FR85011A
receiver offer an exceptional optical power budget of
28 dB.
Modular in design, the
FT85011A
and
mounted or can be used as stand-alone modules. Rack mounting
is accomplished using the RK5000 Series rack mount chassis.
Stand-alone modules can be placed on a desktop or can be mounted
to a wall.
In addition to compatibility with each other, the
mitter and the
models. The
FR85011 receiver. The
FT85011A
FR85011A
receiver are compatible with other fiber
transmitter is backward compatible with the
FR85011A
receiver is backward compatible
with the FS85011 and FT85011 transmitters.
FT85011A
FR85011A
®
FT85011A/
®
pan/tilt/
transmitter and the
units can be rack
FT85011A
trans-
C2604 / NEW 7-06
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Page 2
TECHNICAL SPECIFICATIONS
MODELS
FT85011A Transmitter and Compatible Receivers
Model No.
FT85011A
Transmitter Compatible Receivers
Multimode (62.5/125 µm)
FT85011AMSTR FR85011AMSTR ST 1310/850 nm
FR85011MSTR ST 1310/850 nm
Single-Mode (9/125 µm)
FT85011ASSTR FR85011ASSTR ST 1310/1550 nm 28 dB
FR85011SSTR ST 1310/1550 nm 20 dB
FT85011ASFCR FR85011ASFCR FC 1310/1550 nm 28 dB
FR85011SFCR FC 1310/1550 nm 20 dB
*When using 50/125 µm multimode fiber, subtract 3 dB from the optical power budget.
†
Maximum transmission distance is limited by fiber bandwidth.
‡
Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.
Notes:
• For conformal coated models, replace the first letter F in the model number with the letter C. The conformal coated version of FT85011AMSTR, for example, is
CT85011AMSTR.
• For models with higher optical power budgets, contact the factory.
Supplied Accessories
• Regulated switching power supply with multiple plug adapters
(North American, Australian, United Kingdom, and European);
100-240 VAC, 50-60 Hz input, 12 VDC output
Note:
In extreme temperature conditions, it is recommended that an
industrial-rated outdoor power supply such as the Pelco® WCS1-4 power
supply be used.
• Wall clip for attachment of single module to wall
Fiber Optic
Connector
Type
Wavelength
(Video/Data)
Optical
Power
Budget
1 26 dB
1 20 dB
Maximum
Transmission
Distance
*
*
*
*
*
*
6 km (3.7 mi)
6 km (3.7 mi)
46 km (28.6 mi)
30 km (18.6 mi)
46 km (28.6 mi)
30 km (18.6 mi)
†
†
‡
‡
‡
‡
Page 3
TECHNICAL SPECIFICATIONS
MODELS
FR85011A Receiver and Compatible Transmitters
Model No.
FR85011A
Receiver Compatible Transmitters
Multimode (62.5/125 µm)
FR85011AMSTR FT85011AMSTR ST 1310/850 nm
FT85011MSTR
FS85011MST
Single-Mode (9/125 µm)
FR85011ASSTR FT85011ASSTR ST 1310/1550 nm 28 dB
FT85011SSTR
FS85011SST
FR85011ASFCR FT85011ASFCR FC 1310/1550 nm 28 dB
FT85011SFCR
FS85011SFC
*When using 50/125 µm multimode fiber, subtract 3 dB from the optical power budget.
†
Maximum transmission distance is limited by fiber bandwidth.
‡
Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.
Notes:
• For conformal coated models of rack-mountable transmitters and receivers, replace the first letter F in the model number with the letter C. The conformal coated
version of FR85011AMSTR, for example, is CR85011AMSTR.
• For models with higher optical power budgets, contact the factory.
Fiber Optic
Connector
Type
Wavelength
(Video/Data)
1 26 dB
ST 1310/850 nm
1 20 dB
ST 1310/1550 nm 20 dB
FC 1310/1550 nm 20 dB
Optical
Power
Budget
Maximum
Transmission
Distance
*
*
*
*
*
*
6 km (3.7 mi)
6 km (3.7 mi)
46 km (28.6 mi)
30 km (18.6 mi)
46 km (28.6 mi)
30 km (18.6 mi)
†
†
‡
‡
‡
‡
Supplied Accessories
• Regulated switching power supply with multiple plug adapters
(North American, Australian, United Kingdom, and European);
100-240 VAC, 50-60 Hz input, 12 VDC output
Note:
In extreme temperature conditions, it is recommended that an
industrial-rated outdoor power supply such as the Pelco WCS1-4 power
supply be used.
• Wall clip for attachment of single module to wall
Page 4
TECHNICAL SPECIFICATIONS
VIDEO
Number of Channels 1
Modulation Type Pulse code modulation, 8-bit resolution
Video Input (FT85011A)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Video Output (FR85011A)
Bandwidth 6.5 MHz
Gain Unity
Differential Gain <2%
Differential Phase <1°
Tilt <1%
Signal-to-Noise Ratio >60 dB (CCIR weighted)
DATA
Number of Channels 1
Data Communication RS-232, RS-422, RS-485 (2-wire/4-wire),
Manchester, Bi-Phase, Coaxitron
Maximum Baud Rate 500 kbps
GENERAL
Operating Temperature -40° to 167°F (-40° to 75°C)
Input Power Requirements 12 VDC or 24 VAC, 300 mA
LED Indicators Power, Video Present, Optic Fault, Data Tx,
Data Rx
Dimensions 8.75" D x 1.08" W x 4.81" H
(22.23 x 2.74 x 12.22 cm)
Unit Weight 1.48 lb (0.67 kg)
Shipping Weight 3 lb (1.36 kg)
MECHANICAL
Connectors
Video BNC
Rack Power/Alarm 4-pin connector
Standalone Power 2-pin connector, screw terminal
Data 9-pin connector, screw terminal
Fiber Optic ST for multimode fiber
ST or FC for single-mode fiber
CERTIFICATIONS
• CE, Class A
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class A
• C-Tick
• Complies with FDA requirements for Class 1 laser products
• Meets NEMA TS 2 and Caltrans traffic signal control equipment
standards for ambient operating temperature, mechanical shock and
vibration, humidity with condensation, high-line/low-line voltage
conditions, and transient voltage protection—certified by an independent
testing laboratory
Note:
Conformal coating is required for operation in environments with
relative humidity above 95% (condensing).
OPTIONAL ACCESSORIES
WM5001-3U Wall mount base kit for single-width module
WM5001-3UEXP Wall mount expansion kit for single-width module
RK5000-3U 19-inch rack mount chassis for 14 slots, no power (3 RUs)
RK5000PS-3U 19-inch rack mount chassis for 12 slots with power (3 RUs)
EPS5000-120 External rack power supply, 1 RU, dual 120 W power
RK5001B-3U Blank filler panel, single width
RK5002B-3U Blank filler panel, double width
RK5001-1UEXP Adapter kit that allows a 3 RU single-width fiber module
outputs
to be used in RK5000PS-5U rack mount chassis
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Coaxitron, Pelco, and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
Loading...