Pelco FR8304 User Manual
INSTALLATION
FT8304/FR8304
Fiber Transmitter
and Receiver
Four-Channel Digitally Encoded Video
C1644M-B (6/06)
Contents
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel - FT8304 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel - FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the Transmitter/Receiver into a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the Transmitter/Receiver to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
List of Illustrations
1 Four-Channel Video FT8304 Transmitter and FR8304 Receiver . . . . . . . . . . . . . . . . . . . . 7
2 Front Panel of FT8304 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Front Panel of FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Rear Panel of FT8304 Transmitter and FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Mounting the FT8304 Transmitter/FR8304 Receiver Using the Wall Clip . . . . . . . . . . . 14
6 FT8304 Transmitter/FR8304 Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
List of Tables
A Troubleshooting with Front-Panel Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C1644M-B (6/06) 3
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the points where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases shall be placed on the apparatus.
WARNING:
15.
moisture.
16. Installation should be done only by qualified personnel and conform to all local codes.
17. Use only installation methods and materials capable of supporting four times the maximum
specified load.
18. A CCC-approved power cord must be used to power this equipment when used in China.
CAUTION:
19.
To reduce the risk of electric shock do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
These servicing instructions are for use by qualified service personnel only.
4 C1644M-B (6/06)
The product and/or manual may bear the following marks:
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
C1644M-B (6/06) 5
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Changes and Modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commission’s rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
6 C1644M-B (6/06)
Product Overview
DESCRIPTION
The FT8304/FR8304 fiber transmitter and receiver provide the ability to transmit up to four composite
video channels over one optical fiber (refer to Figure 1).
FOUR
VIDEO
INPUTS
Figure 1.
FT8304
TRANSMITTER
ONE
FIBER
FR8304
RECEIVER
Four-Channel Video FT8304 Transmitter and FR8304 Receiver
FOUR
VIDEO
OUTPUTS
Features of the FT8304/FR8304 fiber optic transmission system include the following:
•
8-bit digitally encoded video for high-quality multichannel video transmission over a single
fiber
•
Multimode fiber support for distances up to 2 km (1.2 mi)
•
Single-mode fiber support for distances up to 30 km (18.6 mi)
•
Exceeds all requirements for the RS-250C Medium-Haul Transmission specification
•
12 VDC or 24 VAC power supply
•
Compatible with NTSC, PAL, and SECAM video standards
•
Meets NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient
operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
NOTE:
Conformal coating is required for operation in environments with relative humidity
above 95% (condensing).
•
No performance adjustments required
•
Stand-alone and rack-mountable modular design
•
LED indicators for monitoring of signal status, laser status, and operating power
complies
The FT8304 transmitter/FR8304 receiver is a Class 1 laser product that
with FDA radiation
performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2, 2001-08.
C1644M-B (6/06) 7
MODELS
The FT8304/FR8304 fiber transmitter and receiver consist of the following series of models:
Multimode Models:*
FT8304MSTR Four-channel fiber optic video transmitter; multimode, ST connector
FR8304MSTR Four-channel fiber optic video receiver; multimode, ST connector
Single-Mode Models:*
FT8304SSTR Four-channel fiber optic video transmitter; single-mode, ST connector
FR8304SSTR Four-channel fiber optic video receiver; single-mode, ST connector
FT8304SFCR Four-channel fiber optic video transmitter; single-mode, FC connector
FR8304SFCR Four-channel fiber optic video receiver; single-mode, FC connector
*For conformal coated models, replace the first letter F in the model number with the letter
The conformal coated version of FT8304MSTR, for example, is CT8304MSTR.
OPTIONAL ACCESSORIES
The following optional accessories are available:
WM5001-3U Wall mount base kit for single-width module
WM5001-3UEXP Wall mount expansion kit for single-width module
RK5000-3U 19-inch rack mount chassis for 14 slots (no power), 3 RUs
RK5000PS-3U 19-inch rack mount chassis for 12 slots with power, 3 RUs
EPS5000-120 External rack power supply, 1 RU, dual 120 W power outputs
RK5001B-3U Blank filler panel, single width
RK5002B-3U Blank filler panel, double width
RK5001-1UEXP Adapter kit that allows a 3 RU single-width fiber module to be used in
RK5000PS-5U rack mount chassis
C.
8 C1644M-B (6/06)
Loading...