Pelco FMCI-PG1POE, FMCI-PF1POE Specsheet

PRODUCT SPECIFICATION

FMCI-PoE Series Media Converters

transmission and power

10/100/1000 MBPS ETHERNET ELECTRICAL TO OPTICAL WITH POWER OVER ETHERNET, REQUIRING FSFP MODULE

Product Features

• Electrical Port Supports Autonegotiation for 10 Mbps, 100 Mbps, or

1000 Mbps, Full-Duplex or Half-Duplex Data

• Supports Distances up to 120 km (74.5 mi) Using Interchangeable

Small Form Factor Pluggable (FSFP) Modules for Compatibility with a Wide Range of Optical Fibers, Optical Connector Types, and Optical Transmission (Must Be Ordered Separately)

• IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC

• Automatic Medium Dependent Interface/Medium Dependent

Interface Crossover (MDI/MDI-X) Operation

• Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Voltage Transient Protection on All Power and Signal Input/Output

Lines Provides Protection from Power Surges and Other Voltage Transient Events

• LED Status Indicators for Monitoring All Critical and Normal

Operating Parameters

• Compliant with IEEE 802.3 Standards

FMCI-PG1POE

The FMCI-PF1PoE and FMCI-PG1PoE Ethernet media converters are designed to transmit and receive 10/100 Mbps or 10/100/1000 Mbps data over optical fiber through user-selectable FSFP options. All models require interchangeable small form-factor pluggable (FSFP) modules (ordered separately) for fiber type, distance, and connectors.

The FMCI-PF1PoE and FMCI-PG1PoE media converters transmit and receive a single channel of Ethernet data, and support IEEE 802.3at Class 1–4 as Power Sourcing Equipment (PSE) with up to 30 W at 48 VDC. The electrical interface autonegotiates between 10 Mbps, 100 Mbps, or 1000 Mbps Ethernet rates without any adjustments. The optical interface of the FMCI-PF1PoE operates at a 100 Mbps Ethernet rate while the optical interface of the FMCI-PG1PoE operates at 1000 Mbps (1 Gbps).

The FMCI-PF1PoE and FMCI-PG1PoE units are designed to operate in extreme temperatures. Built-in indicator LEDs display operating status. The optical transmission of Ethernet-compatible IP camera surveillance video makes the FMCI-PoE Series ideal for transportation, airport, and college campus applications.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3935 / NEW 9-4-13

TECHNICAL SPECIFICATIONS

MODELS

FMCI-PF1POE IP media converter, requires FSFP modules*,

10/100 Mbps, single-channel, miniature size, Power over Ethernet

FMCI-PG1POE IP media converter, requires FSFP modules*,

10/100/1000 Mbps, single-channel, miniature size, Power over Ethernet

ELECTRICAL

Power Input 48 VDC Power Consumption

FMCI-PF1POE 60 W

FMCI-PG1POE 50 W MTBF >100,000 hours LED Indicators Optical link, data activity

DATA

Data Interface Ethernet Data Rate

FMCI-PF1POE 10/100 Mbps

FMCI-PG1POE 10/100/1000 Mbps Operating Mode Electrical port, full-duplex or half-duplex

Optical port, full-duplex

OPTICAL

Data Rate

FMCI-PF1POE 100 Mbps

FMCI-PG1POE 1000 Mbps Wavelength FSFP dependent* Number of Fibers FSFP dependent*

GENERAL

Dimensions

FMCI-PF1POE 10.36 × 9.51 × 2.80 cm

(4.08" D × 3.74" W × 1.10" H)

FMCI-PG1POE 8.40 × 6.40 × 2.80 cm

(3.30" D × 2.50" W × 1.10" H) Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Relative Humidity 0 to 95%, noncondensing Weight

Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

• CE, Class E

• FCC, Part 15

• UL Listed

•C-Tick

• IEEE 802.3

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control

equipment environmental standards

RECOMMENDED ACCESSORIES

FEXTPS-48V Fiber external power supply with multiple

plug adaptors (North American, Australian,

United Kingdom, and European)

MECHANICAL

Connectors

Optical FSFP dependent* Power Terminal Block Electrical RJ-45

*Requires selection of interchangeable FSFP modules (must be ordered

separately) for specific fiber type, distance and connector. Refer to FSFP Series specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

Product specifications and availability are subject to change without no tice.

services are the property of their respective comp anies.