Pelco FMCI-PG1 Specsheet

PRODUCT SPECIFICATION

transmission and power

FMCI-PG Series Media Converters

10/100/1000 MBPS ETHERNET ELECTRICAL TO OPTICAL, REQUIRING FSFP MODULE

Product Features

• Full-Duplex Transmission of 10/100/1000 Mbps Ethernet

– 10Base-T/100Base-TX/1000Base-TX Electrical Port

– 1000Base-FX Optical Port When Used with Suitable Small

Form-Factor Pluggable (FSFP) Modules

• Supports Autonegotiation and Automatic Medium Dependent

Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation for Full-Duplex or Half-Duplex Operation

• Supports Distances up to 120 km (74.5 mi) Using Interchangeable

FSFP Modules for Compatibility with a Wide Range of Optical Fibers, Optical Connector Types, and Optical Transmission (Must Be Ordered Separately)

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Voltage Transient Protection on All Power and Signal Input/Output

Lines Provides Protection from Power Surges and Other Voltage Transient Events

• LED Status Indicators for Monitoring All Critical and Normal

Operating Parameters

• Hot-Swappable Rack Modules

• Stand-Alone or Rack-Mountable Modular Design

• Compliant with IEEE 802.3 Standards

FMCI-PG1 FMCI-PG1MFMCI-PG2

The FMCI-PG1 and FMCI-PG1M are single channel Ethernet media converters; FMCI-PG2 is a dual channel Ethernet media converter. These devices accept a 10/100/1000 Mbps Ethernet rate and convert it to a 1000 Mbps optical Ethernet rate using either one or two optical fibers depending upon the specific optical module used. Interchangeable small form-factor pluggable (FSFP) transceivers must be ordered separately.

The FMCI-PG Series is designed to operate in harsh industrial environments without electrical or optical adjustments (plug and play). The FMCI-PG1 and the FMCI-PG2 may be mounted in a rack or directly onto a surface. The FMCI-PG1M may be wall-mounted for applications where space is limited.

The FMCI-PG Series units are designed to operate in extreme temperatures. Built-in indicator LEDs display operating status. External power is required for the FMCI-PG Series units. The units can be powered with the recommended FEXTPS fiber external power supply.

The optical transmission of Ethernet-compatible IP camera surveillance video makes the FMCI-PG Series ideal for transportation, airport, and college campus applications.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3934 / REVISED 9-6-13

TECHNICAL SPECIFICATIONS

MODELS

FMCI-PG1M IP media converter, requires FSFP modules*,

1000 Mbps, single-channel, miniature size

FMCI-PG1 IP media converter, requires FSFP modules*,

1000 Mbps, single-channel, standard size

FMCI-PG2 IP media converter, requires FSFP modules*,

1000 Mbps, two-channel, standard size

ELECTRICAL

Power Input

Standard Size 8 to 15 VDC

Mini AC/DC 22 to 27 VAC or 8 to 24 VDC Power Consumption 2 W MTBF >100,000 hours LED Indicators Optical link, data activity

DATA

Data Interface Ethernet Data Rate 10/100/1000 Mbps, IEEE 802.3 compliant Operating Mode Electrical port, full-duplex or half-duplex

Optical port, full-duplex

OPTICAL

Data Rate 1000 Mbps Wavelength FSFP dependent* Number of Fibers FSFP dependent*

MECHANICAL

Connectors

Optical FSFP dependent*

Power Terminal block

Electrical RJ-45 Number of Rack Slots 1 (FMCI-PG1 and PMCI-PG2 models only)

*Requires selection of interchangeable FSFP modules (must be ordered

separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.

GENERAL

Dimensions

FMCI-PG1, FMCI-PG2 15.5 × 13.5 × 2.8 cm

(6.1" D × 5.3" W × 1.1" H)

FMCI-PG1M 8.4 × 6.4 × 2.8 cm

(3.3" D × 2.5" W × 1.1" H) Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Relative Humidity 0 to 95%, noncondensing Weight

Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

• CE, Class E

• FCC, Part 15

• UL Listed

•C-Tick

• IEEE 802.3

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control

equipment environmental standards

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, European

power cord USRACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, North

American power cord FEXTPS Fiber external power supply with multiple

plug adaptors (North American, Australian,

United Kingdom, and European); 100 to

240 VAC, 50 to 60 Hz input, 9 VDC output

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

Product specifications and availability are subject to change without no tice.

services are the property of their respective comp anies.