Pelco FMCI-BF1SM1ST, FMCI-AF1SM1STM, FMCI-AF1SM1ST, FMCI-BF1SM1STM, FMCI-BF1MM1ST Specsheet

PRODUCT SPECIFICATION

transmission and power

FMCI Series Ethernet Optical Fiber Media Converters

10/100 MBPS ETHERNET TO OPTICAL MEDIA CONVERTER

Product Features

• 10/100 Mbps Ethernet

– 10Base-T/100Base-TX Electrical Port

– 100Base-FX Optical Port

• Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,

Full-Duplex or Half-Duplex Data

• Optical Port Supports 100 Mbps Full-Duplex Data

• Automatic MDI/MDI-X (medium dependent interface/medium

dependent interface crossover) Operation

• Multimode Fiber Support for Distances up to 3 km (2 mi)

• Single-Mode Fiber Support for Distances up to 20 km (12 mi)

• Transparent to Data Encoding/Compatible with Major Data Protocols

• Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal

Control Equipment Environmental Standards

• ST Optical Connectors

• 1-Fiber Design

• Flexible Option for Operating AC/DC Power

• Voltage Transient Protection on All Power and Signal Input/Output

Lines Provides Protection from Power Surges and Other Voltage Transient Events

• No Performance Adjustments Required

• LED Status Indicators for Monitoring All Critical and Normal

Operating Parameters

• Standard Size is Hot-Swappable in the Card Cage

• Compliant with IEEE 802.3 Standards

FMCI-AF1MM1ST

(BOTH PAIR WITH FULL-SIZE OR MINI B-SIDE)

FMCI-AF1SM1STM

FMCI Series Ethernet media converters are designed to transmit

and receive 10/100 Mbps data over multimode or single-mode optical fiber with ST optical connectors. The electrical interface will autonegotiate to a 10 Mbps or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate.

FMCI Series media converters are environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status and monitoring critical operating parameters.

Standard size FMCI Series units can be either surface- or rack-mounted; mini units are surface-mount only. Either type can be DIN-rail mounted by the addition of an adapter plate.

International Standards

Organization Registered Firm;

ISO 9001 QualitySystem

C3932 / REVISED 8-24-15

TECHNICAL SPECIFICATIONS

MODELS

Converter

Type

Standard Mount

DC-Only Media

Mini AC/DC

Media

Transmitter

FMCI-AF1MM1ST FMCI-BF1MM1ST ST 1 1310/1550 nm 1 10 dB 3 km (2 mi)

FMCI-AF1SM1ST FMCI-BF1SM1ST ST 1 1310/1550 nm 1 15 dB 20 km (12 mi)

FMCI-AF1MM1STM

FMCI-AF1SM1STM FMCI-BF1SM1ST ST 1 1310/1550 nm 1 15 dB 20 km (12 mi)

Compatible

Receiver

FMCI-BF1MM1STM ST 1 1310/1550 nm NA 10 dB 3 km (2 mi)

FMCI-BF1MM1ST ST 1 1310/1550 nm 1 10 dB 3 km (2 mi)

Fiber Optical

Connector

Type

Multimode (62.5/125 µm)

Single Mode (9/125 µm)

Multimode (62.5/125 µm)

Single Mode (9/125 µm)

Number

of Fibers

Wavelength

Number of Rack Slots

Optical

Power

Budget

Maximum

Transmission

Distance

ELECTRICAL

Power Input

Standard Size 8 to 24 VDC Mini AC/DC 22 to 27 VAC or 8 to 24 VDC

Current Protection Automatic resettable (solid state current

limiter) MTBF >100,000 hours LED Indicators Optical Link, Data;

Electrical Link, Data;

Power

DATA

Number of Channels 1 Data Interface Ethernet Data Rate 10/100 Mbps Operating Mode Electrical port, full duplex or half duplex

Optical port, full duplex

MECHANICAL

Connectors

Optical ST, 1 fiber Power Terminal block TCP/IP Port RJ-45

Number of Rack Slots 1 (standard mount, DC-only media models)

GENERAL

Dimensions

Standard 15.5 × 13.5 × 2.8 cm

(6.1" D × 5.3" W × 1.1" H)

Mini 8.4 × 6.4 × 2.8 cm

(3.3" D × 2.5" W × 1.1" H) Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Relative Humidity 0 to 95%, noncondensing Weight

Unit 0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

• CE, Class A

• FCC, Class A

• UL/cUL Listed

• C-Tick

• RoHS

• IEEE 802.3

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, European power cord

USRACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, North American power cord

FEXTPS Fiber external power supply with multiple

plug adapters (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.