Pelco FH-MI20DN-12, FH-MI10LW-6-F, FH-MI10LW-50-F, FH-MC20-50, FH-MI20DN-12-F Specsheet

PRODUCT SPECIFICATION

camera solutions

FH-MI/FH-MC Series Fortified Camera System

HIGH HUMIDITY

Product Features

• Integrated Camera System including Housing, Lens, Camera, and

Power Supply; all FH Series Camera Systems are Wired, Tested, and
Certified

• Temperature Range from –20° to 45°C (–4° to 113°F)

• Active Dehumidifier

• IK10 Mechanical Impact Resistance

• Analog and IP Camera Models with Three Lens Options

• Input Power 24 VAC

• Optional Fiber Optic Media Converter for IP Camera Models

Integrated Camera System

The active on-board dehumidifier of the FH-MI/FH-MC Series
Fortified Camera System protects the camera and other system-

related electronics by removing moisture buildup from sensitive
components.

The FH-MI/FH-MC Series is IP66 rated with an active dehumidifier,
and is dust- and water-tight. The enclosures house one of several
camera options including analog NTSC or PAL models. IP cameras
include 1 and 2 megapixel (MPx) models. The FH-MI/FH-MC Series
is ideal for installations in high humidity environments.

Single Part Number

The FH-MI/FH-MC Series is a complete camera, lens, housing,
power supply, and optional fiber optic media converter system. All
FH Series Camera Systems are prewired and ready for immediate
installation.

Active Dehumidifier

The FH-MI/FH-MC Series contains an active dehumidifier system
that operates to remove moisture from the internal camera chamber.
This active system allows the camera to operate with continuous
humid weather conditions.

Optional Fiber Media Converter

Pelco IP camera systems can be configured with an optional fiber
optic media converter. The fiber media converter uses FSFP
technology to give the installer the choice of many fiber media
formats from single mode to multimode.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3981 / REVISED 3-10-14

TECHNICAL SPECIFICATIONS

(LENS NOT SUPPLIED WITH CAMERA)

(LENS NOT SUPPLIED WITH CAMERA)

(LENS NOT SUPPLIED WITH CAMERA)

13VDIR3-8.5

SYSTEM COMPONENTS

C20-DW Series Analog Day/Night WDR Camera

• Wide Dynamic Range

• 650 TV Lines

• High Sensitivity

• Day/Night with Automatic or Manual Control

• 1/3-Inch Format CCD Imager

• Autosensing DC Drive Auto Iris

• Automatic/Manual White Balance Settings for Difficult Lighting
Situations

• Selectable Automatic Gain Control

• Advanced Backlight Compensation

• 3D Digital Noise Reduction (DNR)

• Privacy Zones

• Motion Detection

• Camera Titles

Sarix® IXE10LW Series IP Cameras with SureVision

• Up to 1.2 Megapixel (MPx) Resolution (1280 x 960)

• Up to 30 Images per Second (ips) at 1280 x 960

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Day/Night Models with Mechanical IR Cut Filter

• Wide Dynamic Range with Anti-Bloom Technology

• Power over Ethernet (IEEE 802.3af) or 24 VAC

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• Built-In Analytics

• Local Storage (Micro SD) for Alarm Capture

Sarix® IXE20 Series IP Cameras

• Up to 2.1 Megapixel Resolution (1920 x 1080)

• Up to 30 Images per Second (ips) at 1920 x 1080

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Sensitivity Down to 0.03 Lux

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• Built-in Analytics

• Local Storage (Micro SD) for Alarm Capture

• Adaptive Motion Detection

13VDIR Series Day/Night Lens

• 1/3-Inch Format, Auto Iris (Direct Drive), IR Corrected

• Designed for All Day/Night and Monochrome Cameras

• Increased Sharpness in Monochrome Mode

• Focuses IR and Visible Light

• Eliminates the Problem of IR Focus Shift

• Auto Iris, Manual Focus, and Zoom

TECHNICAL SPECIFICATIONS

13M15-50

FSFP-EFMM2LC2

13M Series Megapixel Varifocal Lens

• For use with 1/3-Inch Cameras, up to 5 MPx

• Auto Iris, Manual Focus, and Zoom

• High Resolution Power in a Compact Body

FMCI-PF1M Series Media Converters

• 10/100 Mbps Ethernet

– 10Base-T/100Base-TX Electrical Port
– 100Base-FX Optical Port

• Optical Port Supports 100 Mbps Full-Duplex Data

• Supports Distances up to 80 km (49.7 mi) Using Interchangeable Small

Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance,
and Connector (Must Be Ordered Separately)

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control

Equipment Environmental Standards

FSFP Series Transceivers

• Interchangeable FSFP Transceivers to Match Media Type, Fiber Count,

Fiber Path Length, and Connector Type

• Operating Temperature of –40° to 75°C (–40° to 167°F)

• No Performance Adjustments Required

• Multi-Source Agreement (MSA) Compliant

• Compliant with IEEE 802.3 Standards

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

services are the property of their respective comp anies.

Product specifications and availability are subject to change without no tice.

©Copyright 2014, Pelco, Inc. All rights reserved.

SYSTEM MODEL NUMBERS

Analog Camera Systems

FH-MC Series Camera Lens Description

FH-MC20-8

FH-MC20-12 13VDIR2.8-11

C20-DW-6

FH-MC20-50 13VDIR7.5-50

FH-MC20X-8

FH-MC20X-12 13VDIR2.8-11

C20-DW-6X

FH-MC20X-50 13VDIR7.5-50

IP Camera Systems

FH-MI Series Camera Lens Description

FH-MI10LW-6

FH-MI10LW-12 13M2.8-12

IXE-10LW

FH-MI10LW-50 13M15-50

FH-MI20DN-6

FH-MI20DN-12 13M2.8-12

IXE-20DN

FH-MI20DN-50 13M15-50

IP Camera Systems with FMCI-PF1 Media Converter
Requires FSFP module, sold separately.

FH-MI Series Camera Lens Description

FH-MI10LW-6-F

FH-MI10LW-12-F 13M2.8-12

IXE-10LW

FH-MI10LW-50-F 13M15-50

FH-MI20DN-6-F

FH-MI20DN-12-F 13M2.8-12

IXE-20DN

FH-MI20DN-50-F 13M15-50

13VDIR3-8.5

High humidity housing
with C20-DW NTSC
camera

13VDIR3-8.5

High humidity housing
with C20 PAL camera

13M2.2-6

High humidity housing
with 1.2 MPx IXE-10LW
IP camera

13M2.2-6

High humidity housing
with 2 MPx IXE-20DN
IP camera

13M2.2-6 High humidity housing,

fiber ready, with

1.2 MPx IXE-10LW
IP camera

13M2.2-6

High humidity housing,
fiber ready, with 2 MPx
IXE-20DN IP camera

ELECTRICAL

Connections RJ-45, fiber, or coaxial
Input Power 24 VAC
Input Voltage

24 VAC 21.6 to 26.4 VAC
Power Consumption 0.84 A @ 24 VAC; less than 20 W
Active Dehumidifier Thermostatically controlled

RECOMMENDED MOUNTS

Corner

ECM100 Corner mount adapter

Pipe/Pole

EPM Medium duty mount for pipe/pole

applications

CERTIFICATIONS/RATING

• CE, Class A

• UL/cUL listed

• IK10 mechanical impact resistance

• Meets NEMA Type 4X and IP66 standards (Enclosure and data connection

compartment of wall arm)

• Meets NEMA Type 3R and IP54 standards (Power connection area in wall

arm)

GENERAL

Construction

Enclosure High-grade thermoplastic
Mounting arm Die-cast aluminum
Window High optic Lexan

™

Finish White; powder coated wall arm and knuckle
Environment Outdoor
Operating Temperature –20° to 45°C (–4° to 113°F)
Storage Temperature –50° to 85°C (–58° to 185°F)
Humidity

Working and storage 10% to 95% RH (non-condensing)

Dimensions 64.11 x 19.21 x 39.12 cm

(25.24" D x 7.56" W x 15.40" H)

Weight Unit Shipping

Analog Models 7.2 kg (16.0 lb) 8.1 kg (18.0 lb))
IP Models 8.1 kg (18.0 lb) 9.0 kg (20.0 lb)

MECHANICAL

Latching 6 captivated, Phillips head screws
Window Face Plate 6 Phillips head screws

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community