PRODUCT SPECIFICATION
Esprit® HD Series IP Positioning System
ES5230 SERIES STANDARD AND PRESSURIZED MODELS
Product Features
• Up to 1920 x 1080 Resolution
• 16:9 Aspect Ratio; 1080p at 30 Images per Second (ips)
• 2.0 Megapixel (MPx), 30X Optical Zoom, 12X Digital Zoom,
Wide Dynamic Range (WDR) Camera
• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
• Built-in Analytics Including AutoTracker and Adaptive Motion
Detection
• 2 Simultaneous Video Streams: Dual H.264 or H.264 and Scalable
MJPEG
• 360° Continuous Pan Rotation at 100° per Second
• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, RTSP, NTP, and More
• Electronic Image Stabilization (EIS)
• Pan/Tilt and Enclosure with Integrated Optics Package (IOP) or
Pressurized Integrated Optics Cartridge (IOC)
• 16 Preset Tours, 256 Presets, 32 Window Blanks
• Integrated Window Wiper with Configurable Delay and Shut-Off
(ES5230-1x Models)
• Open IP Standards
• ONVIF Profile S Conformant
camera solutions
Network Positioning System
Pelco takes its industry-leading Esprit® Series positioning system
into the world of high definition. Esprit HD delivers crystal-clear, live
streaming images over the Internet using a standard Web browser
(Microsoft
®
Internet Explorer® or Mozilla® Firefox®). With six times
the resolution of standard definition positioning systems, Esprit HD
is an ideal solution to view details such as faces, license plates,
tattoos, or other specific features.
Esprit HD supports High-Profile H.264 compression, a vast
improvement in quality over MPEG-4 and 20 times more efficient
than MJPEG. The positioning system features open architecture
connectivity for third-party software recording solutions allowing
integration into virtually any IP-based HD system. It is also
compatible with Digital Sentry
all Pelco IP camera solutions, Esprit HD is Endura Enabled
record, manage, configure, and view multiple live streams. When
connected to an Endura
the positioning system has access to EnduraStor
®
video management systems. As with
®
HD network-based video security system,
™
and EnduraView
™
to
for optimized image quality and bandwidth efficiency.
Built-In Analytics
Pelco Analytics enhance the flexibility and performance of
Esprit HD. Nine Pelco behaviors are preloaded and included as
standard features. Pelco behaviors can be configured and enabled
using a standard Web browser, and they are compatible with Endura
or a third-party system that supports alarms using Pelco’s API.
Web Interface
Esprit HD uses a standard Web browser for powerful remote setup
and administration.
Window Blanking
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. Esprit HD supports up to
32 blanked windows. A blanked area will appear on the screen as a
solid gray window.
Video Systemization
Esprit HD easily connects to Pelco IP and hybrid systems such as
Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later).
The camera is also compatible with Digital Sentry NVs (DS NVs), a
full-featured video management software, which is available as a
free download at www.pelco.com. DS NVs includes four free Pelco IP
licenses and allows for the management of video from up to
™
64 cameras.
Esprit HD features open architecture connectivity to third-party
software. Pelco offers an application programming interface (API)
and software developer’s kit (SDK) for interfacing with Pelco’s IP
cameras.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4008 / REV 11-06-14
TECHNICAL SPECIFICATIONS
Pelco’s ES5230 Esprit® HD Positioning System features a pan/tilt,
enclosure, and either an Integrated Optics Package (IOP) or a
pressurized Integrated Optics Cartridge (IOC) in a single, easy-toinstall system. Options include IOP with or without wiper and IOC
models with wiper.
A powder-coated, aluminum construction makes the ES5230 Series
ideal for either indoor or outdoor applications. The system has an
absolute operating temperature range of –45° to 50°C (–50° to
122°F). Within two hours after power-up, the entire unit can de-ice
and be operational from a temperature of –25°C (–13°F).
The ES5230 Series variable pan and tilt speeds range from 0.1 to 40
degrees per second in manual pan mode, and 0.1 to 30 degrees per
second in manual tilt. Pan preset and turbo speeds are 100 degrees
per second. Tilt preset speed is 30 degrees per second.
The ES5230 Series system’s IOC contains dry nitrogen pressurized to
10 psig, which protects the environment inside the cartridge
eliminating internal condensation and corrosion. Sensors strategically placed in the cartridge send an “Alert” message if pressure
drops below factory-set acceptable limits. The IOC is factory assembled and installed in the ES5230 Series systems. All labor intensive
procedures of setting up the camera, lens and charging the unit with
dry nitrogen are eliminated. The miniature size of the cartridge
decreases the future need for maintenance and increases the overall
reliability of the pressurized unit.
Many models include a window wiper. The wiper is completely
integrated into the enclosure and does not interfere with the viewing
range of the system. The wiper can be configured to delay between
wipes and to automatically shut off after a specified period. The wiper
design also allows for easy replacement of the wiper blade. A built-in
heater, window defroster/defogger, sun shroud, and insulation
blanket are standard features on the ES5230 units, which also
includes an open collector auxiliary output to control external devices.
The systems are available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC. The ES5230 Series also
has a power-up recovery mode that allows the user to specify what
operation the system will resume whenever the power is cycled.
Electronic Image Stabilization (EIS)
Electronic image stabilization (EIS) is a feature of the camera that
can help compensate for some frequencies of vibration. In all cases,
care should be taken to ensure that any positioning system is
mounted to a rigid location.
The default for EIS is OFF. The user can turn EIS ON if vibration is
affecting image quality. Although EIS can reduce the impact of
vibration on image quality, it cannot correct for all levels of vibration.
Other measures should be taken to isolate the camera from the
source of the vibration or to seek a more rigid mounting location.
PELCO ANALYTICS
ES5230 Series includes nine user-configurable behaviors. The
camera is capable of running up to three behaviors at the same time;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.
Note: Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration.
For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different scenarios for the behavior, which will automatically detect
and trigger alarms when specific activity is detected.
Pelco Analytics are configured and enabled using a standard Web
browser, and Pelco behavior alarms are compatible with Endura or a
third-party system that supports Pelco’s API system.
Multiple Pelco behaviors can be scheduled to work during a certain
time or condition. For example, during the day, a camera can be
configured with Object Counting to count the number of people that
enter a lobby door. At night, the operator can change the profile to
Camera Sabotage to trigger an alarm if a camera is moved or
obstructed. Available Pelco behaviors include:
• Abandoned Object: Detects objects placed within a defined zone and
triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an
ATM, signaling possible card skimming.
• Adaptive Motion Detection: Detects and tracks objects that enter a
scene and then triggers an alarm when the objects enter a user-defined
zone. This behavior is primarily used in outdoor environments with light
traffic to reduce the number of false alarms caused by environmental
changes.
• AutoTracker: Detects and tracks movement in the field of view. When
the AutoTracker behavior is configured, the system automatically pans
and tilts to follow the moving object until the object stops or disappears
from the monitored area.
• Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.
• Directional Motion: Generates an alarm in a high traffic area when a
person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.
• Loitering Detection: Identifies when people or vehicles remain in a
defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.
• Object Counting: Counts the number of objects that enter a defined
zone. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.
• Object Removal: Triggers an alarm if an object is removed from a
user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting from a wall or
a statue from a pedestal.
• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.
TECHNICAL SPECIFICATIONS
13.3
(5.2)
9.9
(3.9)
33.9
(13.3)
37.0
(14.6)
24.9
(9.8)
9.1
(3.6)
20.0
(7.9)
44.3
(17.5)
19.7
(7.7)
CAMERA/OPTICS
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 30X
Digital Zoom 12X
Maximum Resolution 1920 x 1080
Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~
129.0 mm (tele)
Horizontal Angle of View 59.5° (wide) ~ 2.1° (tele)
Aspect Ratio 16:9
Light Sensitivity*
Color (33 ms) 0.65 lux
Color (250 ms) 0.07 lux
Mono (33 ms) 0.20 lux
Mono (250 ms) 0.015 lux
Day/Night Capabilities Yes
IR Cut Filter Yes
Wide Dynamic Range 80 dB
Iris Control Auto iris with manual override
Backlight Compensation Yes
Automatic Gain Control Yes
Active Noise Filtering Yes
Electronic Image
Stabilization (EIS) Yes
*Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 28 dB gain
at 30 IRE (30% of signal level) with Sensitivity Boost OFF;
4X improvement to sensitivity with Sensitivity Boost ON
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
SOFTWARE FEATURES
• Multilingual Menus (English, Spanish, Portuguese, Italian, German,
French, Russian, Turkish, Arabic, Chinese, and Korean).
• 32 Window Blanks, Configurable in Size
• Configurable Park with Actions
• Proportional Pan/Tilt Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
†
Using the maximum number of window blanks in a single view can
affect camera performance and could interrupt certain camera
functions.
†
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding H.264 High, Main, or Base profiles and
Video Streams Up to 2 simultaneous streams; the second
Frame Rate Up to 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3,
MJPEG
stream is variable based on the setup of the
primary stream
2.5, 2, 1 (depending on the coding, resolution,
and stream configuration)
Available Resolutions Resolution
MPx Width Height
Aspect
Ratio
2.07 1920 1080 16:9 30 3.50
0.92 1280 720 16:9 30 2.90
0.59 800 448 16:9 30 1.80
0.52 640 352 16:9 30 1.15
0.23 480 272 16:9 30 0.75
0.06 320 176 16:9 30 0.35
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*,
SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, and
802.1x (EAP)
Users
Unicast Up to 20 simultaneous users depending on
resolution settings (2 guaranteed streams)
Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
Open API Pelco API or ONVIF Profile S
Minimum System Requirements
Processor Intel
Operating System Windows
®
Core™ i3 Processor, 2.4 GHz
®
7 (32-bit and 64-bit) with
®
DirectX
11, Windows XP Service Pack 3 with
DirectX 9.0c, or Mac
®
OS X 10.4 (or later)
Memory 4 GB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or
32-bit pixel color resolution
Web Browser Internet Explorer 8.0 (or later) or Firefox 3.5 (or
later); Internet Explorer 8.0 (or later) is
recommended for configuring analytics
Media Player
†
Pelco Media Player‡ or QuickTime® 7.6.5 for
Windows XP and Windows 7; or QuickTime
7.6.4 for Mac OS X 10.4 (or later)
*Supports mixed IPv4 and IPv6 installations, but not IPv6-only
deployments.
†
This product is not compatible with QuickTime version 7.6.4 for
Windows XP or Windows Vista. If you have this version installed on
your PC, you will need to upgrade to QuickTime version 7.6.5.
‡
Pelco Media Player is recommended for control, smoothness, and
reduced latency as compared to QuickTime.
H.264 High Profile
(IP GOP structure)
Maximum
IPS
Recommended
Bit Rate (Mbps)
TECHNICAL SPECIFICATIONS
ANALYTICS
Required Systems for Pelco Analytics
Pelco Interface WS5200 Advanced System Management
Open API The Pelco API can transmit behavior alarm
Software on an Endura 2.0 (or later) system
data to third-party applications, available at
pdn.pelco.com
GENERAL
Construction Die-cast, extruded and sheet aluminum;
Finish Gray polyester powder coat
Operating Temperature –45° to 50°C (–50° to 122°F) for sustained
Operating Environment Will remain operational in 145 kph (90 mph)
Weight With With
Unit
Standard with IOP 9.0 kg (20 lb) 9.9 kg (22 lb)
With Wiper and IOP 9.5 kg (21 lb) 10.4 kg (23 lb)
With Wiper and IOC 10.0 kg (22 lb) 11.0 kg (24 lb)
Shipping
Standard with IOP 11.3 kg (25 lb) 12.6 kg (28 lb)
With Wiper and IOP 11.7 kg (26 lb) 13.1 kg (29 lb)
With Wiper and IOC 12.3 kg (27 lb) 13.6 kg (30 lb)
stainless steel hardware
system operation or 60°C (140°F) absolute
maximum; within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –25°C (–13°F)
wind conditions;
withstands 209 kph (130 mph)
Pedestal Adapter
Wall Mount
PRESSURIZED INTEGRATED OPTICS CARTRIDGE (IOC)
• Pressurized to 10 psig, Nominal (Sea Level, 21°C [70°F])
• Internal Sensor for Low Pressure Alarm
• Designed to IP67 Standards
• U.S. Patent D472,260
MECHANICAL
Variable Speed 0.1° to 100°
Preset Accuracy ±0.1°
Pan Movement 360° continuous pan rotation
Vertical Tilt Unobstructed +36° to –85°
Manual Pan/Tilt Speeds
Pan 0.1° to 40°/sec manual operation
Tilt 0.1° to 30°/sec manual operation
Preset Speeds
Pan 100°/sec
Tilt 30°/sec
ELECTRICAL
Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch
Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system
Heater and Defroster Thermostatically controlled
Electrical Connections
24 VAC Screw terminals for power and open collector
120/230 VAC RJ-45, 2 power source connections made at
Aux 2 Open collector output with 2-second
selectable for 120/230 VAC inputs
auxiliary output. RJ-45 connector for data
mount location with wire splices and 1 ground
wire splice; 2 wire splices for Aux 2 output
activation; connected relay must require no
more than 32 VDC and 40 mA to energize
relay coil; wire length between Esprit and
relay must be less than 3 m (9.84 ft)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL /cUL Listed
•C-Tick
• Meets NEMA Type 4X and IP66 Standards
• ONVIF Profile S
®
•Cisco
Medianet Media Services Proxy 2.0 compatible
REPLACEMENT INTEGRATED OPTICS PACKAGE (IOP)
The following IOP model is a replacement component only; it is not
interchangeable.
ESIOP5230 Esprit HD 1080P resolution camera and lens
module, 30X replacement IOP module
REPLACEMENT PRESSURIZED INTEGRATED OPTICS
CARTRIDGE (IOC)
The following IOC models are replacement components only; they are not
interchangeable.
ESIOC5230 Esprit HD 1080P resolution camera and lens
module, 30X replacement pressurized IOC
module
OPTIONAL ACCESSORIES
ES-REPLBLADE-2 Package of 2 window wiper replacement
ES-REPLBLADE-10 Package of 10 window wiper replacement
blades
blades
MODEL NUMBERS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2014, Pelco, Inc. All rights reserved.
FACTORY INSTALLED
RECEIVER/DRIVER
TRANSFORMER
MODULE
MEETS NEMA TYPE 4X/IP66
ENCLOSURE STANDARDS
OPTIONAL FACTORY
INSTALLED WIPER
MECHANISM
INTEGRATED OPTICS PACKAGE (IOP) OR
PRESSURIZED INTEGRATED OPTICS
CARTRIDGE (IOC) IP67
MODELS
Enclosure Type
Pedestal Mount* Wall Mount
24 VAC 120/230 VAC 24 VAC 120/230 VAC
With IOP ES5230-02N ES5230-05N ES5230-02W ES5230-05W
With IOP and Wiper ES5230-12N ES5230-15N ES5230-12W ES5230-15W
With IOC and Wiper ES5230-12NP ES5230-15NP ES5230-12WP ES5230-15WP
*Pedestal mount models include Esprit EPP pedestal adapter plate. Use with PM2000/PM2010 mount (not supplied)
for pedestal application.
†
Wall mount models include Esprit EWM wall mount. Optional mounting adapters for corner, pole, and parapet
applications are available.
†
OPTIONAL MOUNTS AND ADAPTERS
ECM100 Co rner mount adapter for use with EWM wall
mount
EPM Pole mount adapter for use with EWM wall
mount
EA4348 EWM-to-Legacy adapter; use with PP4348
parapet mount
PM2000/PM2010 Pedestal mount with cable feedthrough.
For use with Esp rit systems with EPP pedestal
adapter plate.
RECOMMENDED POWER SUPPLIES
MCS Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Loading...