PRODUCT SPECIFICATION
ES40/ES41 Series Positioning System
ESPRIT® SE STANDARD AND PRESSURIZED MODELS
camera solutions
Product Features
• Receiver, Pan/Tilt, and Enclosure with Integrated Optics Package (IOP)
or Pressurized Integrated Optics Cartridge (IOC), NTSC/PAL
• Day/Night, 540 TVL, Autofocus, 128X Wide Dynamic Range (WDR),
Motion Detection, Image Enhancement, and Electronic Image
Stabilization
• Integrated Window Wiper with Configurable Delay and Shut-Off
(ES41 Models)
• Preset Positioning Accuracy ±0.1, Variable Speed Pan: 0.1° to
100°/Sec with Proportional Pan
• Window Blanking, Multishaped
• Internal Scheduling Clock
• On-Screen Compass, Tilt, and Zoom Display
• Autotracking
• Tilt Range of +36° to –85° from Horizontal
• Password Protection
Pelco’s
ES40/ES41 Esprit
receiver, pan/tilt, enclosure, and either an Integrated Optics Package
(IOP) or a pressurized Integrated Optics Cartridge (IOC) in a single,
easy-to-install system. Options include IOP or IOC models with or
without wiper.
For a wide range of applications, the
resolution, color/black-white camera (540 TVL) with an infrared cut
filter, 432X zoom (36X optical, 12X digital), electronic image
stabilization, and wide dynamic range. A powder-coated, aluminum
construction makes the
outdoor applications. The system has an absolute operating
temperature range of –45° to 50°C (–50° to 122°F). Within two hours
after power-up, the entire unit can de-ice and be operational from a
temperature of –25°C (–13°F).
The
ES40/ES41 Series
40 degrees per second in manual pan mode, and 0.1 to 20 degrees per
second in manual tilt. Pan preset and turbo speeds are 100 degrees
per second in wind speeds of 80 kph (50 mph) and 50 degrees per
second in the 145 kph (90 mph) wind-speed profile. Tilt preset speed
is 30 degrees per second. The
360 degrees of continuous pan rotation. The tilt range allows for
horizontal viewing of +36 to –85 degrees. There are 256 configurable
preset positions with a preset accuracy of 0.1 degree.
®
SE Positioning System
ES40/ES41 Series
ES40/ES41 Series
variable pan and tilt speeds range from 0.1 to
ES40/ES41 Series
ideal for either indoor or
features a
offers a high
is capable of
ESPRIT SE IOP SYSTEM WITH WIPER
(SHOWN WITH WALL MOUNT AND POLE ADAPTER)
The
ES40P/ES41P
10 psig, which protects the environment inside the cartridge
eliminating internal condensation and corrosion. Sensors
strategically placed in the cartridge send an “Alert” message if
changes in pressure, temperature, and humidity are beyond factoryset acceptable limits. The sensors also allow for instant on-screen
display of temperature, pressure, and dew point. The IOC is factory
assembled and installed in the
intensive procedures of setting up the camera, lens and charging the
unit with dry nitrogen are eliminated. The miniature size of the
cartridge decreases the future need for maintenance and increases
the overall reliability of the pressurized unit.
The
ES41 Series
integrated into the enclosure and does not interfere with the viewing
range of the system. The wiper can be configured to delay between
wipes and to automatically shut off after a specified period. The wiper
design also allows for easy replacement of the wiper blade. A built-in
heater, window defroster/defogger, sun shroud, and insulation
blanket are standard features on the
include open collector auxiliary outputs that function for two seconds
before deactivating.
The systems are available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC. The
has a power-up recovery mode that allows the user to specify what
operation the system will resume whenever the power is cycled.
system’s IOC contains dry nitrogen pressurized to
ES40P/ES41P
includes a window wiper. The wiper is completely
ES40/ES41
systems. All labor
units, which also
ES40/ES41 Series
also
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1323 / NEW 6-5-12
TECHNICAL SPECIFICATIONS
ADDITIONAL PRODUCT FEATURES
• Deterrent Surveillance
• Integral Multiprotocol (Coaxitron
Receiver/Driver
• Digital Position and Zoom Control and Feedback Using Pelco D Protocol
• Integral Camera Enclosure
• Operational in 145 kph (90 mph) Winds, Can Withstand Wind Velocity up
to 209 kph (130 mph)
• Pan Preset Speed of 100°/Sec in 80 kph (50 mph) Winds and 50°/Sec in
145 kph (90 mph) Winds
• Variable Scan Speeds (1° to 40°/Sec)
• Translator Boards for Selected Competitive Protocols
• Easy to Install: Quick and Simple Electrical Connections
• 24 VAC or 120/230 VAC Selectable
• Full Continuous-Duty Warranty
• 850 nm and 950 nm Active IR Illumination Focus Algorithms
• 256 Configurable Presets with Labels
• Auto, Frame, and Random Scan
• Configurable Power-Up Mode, Park, Manual Limit Stops (Pan), and Scan
Limit Stops (Pan)
• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each
• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
• 10-Inch Integrated Enclosure with Pre-Assembled IOP Camera
• Sun Shroud, Heater/Window Defroster, and Insulation All Standard
• 1 Auxiliary Output
• Electronic Image Stabilization
• Image Enhancement
• Multilingual Menus (English, Spanish, Portuguese, Italian, French,
German, Russian, Polish, Turkish, Czech, and Asian language package:
Chinese, Japanese, Korean)
• Software Update and Setup
• Configurable Locations of Labels and On-Screen Displays
• Configurable Zoom Speeds
• Low Lux Noise Reduction (reduces noise in low light)
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
PRESSURIZED INTEGRATED OPTICS CARTRIDGE (IOC)
• Pressurized to 10 psig, Nominal (Sea Level, 21°C [70°F])
• Internal Sensors for Temperature, Dew Point, and Pressure
• On-Screen Alert for High and Low Temperature, High and Low Pressure,
and High Humidity
• 4 Alert On-Screen Display Modes
• 4 Acknowledge Modes
• Pressurized Relief Valve
• Meets IP67 Standards
®
, RS-422 Pelco D and Pelco P Protocols)
ELECTRICAL
Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch
selectable for 120/230 VAC inputs
Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system
Heater and Defroster Thermostatically controlled
Electrical Connections 2 power source connections made at mount
location with wire splices and 1 ground wire
splice; 1 BNC receptacle and 4 wire splices at
mount location for RS-422 Pelco D and Pelco P
protocols; 2 wire splices for open collector
auxiliary output
Aux 2 Open collector output with 2-second
activation; connected relay must require no
more than 32 VDC and 40 mA to energize relay
coil; wire length between Esprit SE and relay
must be less than 30 m (100 ft)
Video Coaxial Cable
Wiring Distances Cable Type* Maximum Distance
RG59/U 229 m (750 ft)
RG6/U 305 m (1,000 ft)
RG11/U 457 m (1,500 ft)
*Minimum cable requirements: 75-ohms impedance; all copper center
conductor; all copper braided shield with 95% braid coverage.
MECHANICAL
Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +36° to –85°
Variable Pan/Tilt Speed
Pan 0.1° to 40°/sec variable-speed operation,
100°/sec turbo
Tilt 0.1° to 30°/sec variable-speed operation
Preset Speeds
Pan 100°/sec
Tilt 30°/sec
Camera Mounting Integrated camera sled assembly
Latches One link-lock, No. 3 stainless-steel latch; can
be secured with padlock (not supplied)
GENERAL
Construction Die-cast, extruded and sheet aluminum;
stainless steel hardware
Finish Gray polyester powder coat
Viewing Window 5.84 mm (0.23") thick, optically clear,
polycarbonate with proprietary impact-
resistant UV rated coating
Operating Temperature –45° to 50°C (–50° to 122°F) for sustained
system operation or 60°C (140°F) absolute
maximum; within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –25°C (–13°F)
Operating Environment Will remain operational in 145 kph (90 mph)
wind conditions;
withstands 209 kph (130 mph)
Weight With With
Pedestal Adapter Wall Mount
Unit
Standard with IOP 9.0 kg (20 lb) 9.9 kg (22 lb)
With Wiper and IOP 9.5 kg (21 lb) 10.4 kg (23 lb)
Standard with IOC 9.5 kg (21 lb) 10.4 kg (23 lb)
With Wiper and IOC 10.0 kg (22 lb) 11.0 kg (24 lb)
Shipping
Standard with IOP 11.3 kg (25 lb) 12.6 kg (28 lb)
With Wiper and IOP 11.7 kg (26 lb) 13.1 kg (29 lb)
Standard with IOC 11.7 kg (26 lb) 13.1 kg (29 lb)
With Wiper and IOC 12.3 kg (27 lb) 13.6 kg (30 lb)
TECHNICAL SPECIFICATIONS
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
CAMERA/OPTICS
Signal Format NTSC, PAL
Scanning System Progressive or 2:1 interlace
Image Sensor 1/4-inch CCD
Effective pixels
NTSC 768 (H) x 494 (V)
PAL 752 (H) x 582 (V)
Horizontal Resolution >540 TV lines
Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)
Zoom 36X optical, 12X digital
Zoom Speed (optical range) 3.2/4.6/6.6 seconds
Horizontal
Angle of View 57.2° at 3.3 mm wide zoom;
1.7° at 119 mm telephoto zoom
Focus Automatic with manual override
Maximum Sensitivity
at 35 IRE
NTSC 0.02 lux at 1/2 sec shutter
0.55 lux at 1/60 sec shutter (color)
0.018 lux at 1/2 sec shutter (color)
0.00018 lux at 1/2 sec shutter (B-W)
PAL 0.02 lux at 1/1.5 sec shutter
0.45 lux at 1/50 sec shutter (color)
0.015 lux at 1/1.5 sec shutter (color)
0.00015 lux at 1/1.5 sec shutter (B-W)
Sync System AC line lock, phase adjustable using remote
control, V-Sync
White Balance Automatic with manual override
Shutter Speed Automatic manual
NTSC 1/2 ~ 1/30,000
PAL 1/1.5 ~ 1/30,000
Iris Control Automatic with manual override
Gain Control Automatic/OFF
Video Output 1 Vp-p, 75 ohms
Video Signal-to-Noise Ratio >50 dB
Electronic Image Stabilization Integrated
Wide Dynamic Range 128X
13.3
(5.2)
19.7
(7.7)
9.9
(3.9)
37.0
(14.6)
33.9
(13.3)
44.3
(17.5)
24.9
(9.8)
9.1
(3.6)
20.0
(7.9)
CERTIFICATIONS/RATINGS/PATENTS
IOP MODELS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
• C-Tick
• Meets NEMA Type 4X and IP66 standards
• U.S. Patents 340,940 and 5,224,675
IOC MODELS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
• C-Tick
• Meets NEMA Type 4X and IP66 standards
• Meets IP67 standards (Pressurized IOC)
• U.S. Patent D472,260
MODEL NUMBERS
MODELS
Enclosure Type
Standard with IOP
With Wiper with IOP
Standard with IOC
With Wiper with IOC
Signal
Format
NTSC
PAL
NTSC
PAL
NTSC
PAL
NTSC
PAL
Pedestal Mount* Wall Mount
24 VAC 120/230 VAC 24 VAC 120/230 VAC
ES4036-2N
ES4036-2N-X
ES4136-2N
ES4136-2N-X
ES40P36-2N
ES40P36-2N-X
ES41P36-2N
ES41P36-2N-X
ES4036-5N
ES4036-5N-X
ES4136-5N
ES4136-5N-X
ES40P36-5N
ES40P36-5N-X
ES41P36-5N
ES41P36-5N-X
ES4036-2W
ES4036-2W-X
ES4136-2W
ES4136-2W-X
ES40P36-2W
ES40P36-2W-X
ES41P36-2W
ES41P36-2W-X
*Pedestal mount models include Esprit EPP pedestal adapter plate. Use with PM2000/PM2010 mount (not supplied) for
pedestal application.
†
Wall mount models include Esprit EWM wall mount. Optional mounting adapters for corner, pole, and parapet
applications are available.
†
ES4036-5W
ES4036-5W-X
ES4136-5W
ES4136-5W-X
ES40P36-5W
ES40P36-5W-X
ES41P36-5W
ES41P36-5W-X
REPLACEMENT INTEGRATED OPTICS PACKAGE (IOP)
The following IOP modules are replacement components only; they are not
interchangeable.
ESIOP36 Esprit high resolution day/night camera and
lens module, 36X, NTSC format
ESIOP36-X Same as ESIOP36 except PAL format
REPLACEMENT PRESSURIZED INTEGRATED OPTICS
CARTRIDGE (IOC)
The following IOC models are replacement components only; they are not
interchangeable.
IOC-36 Esprit high resolution day/night camera and
lens module, 36X, NTSC format
IOC-36-X Same as IOC-36 except PAL format
OPTIONAL ACCESSORIES
ES-REPLBLADE-2 Package of 2 window wiper replacement
ES-REPLBLADE-10 Package of 10 window wiper replacement
IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount
IPS-CABLE Kit consisting of the remote monitor interface
TXB Series Translator boards for AD
blades.
blades.
video/data breakout box. Allows ground-level
control/configuration when used with the
IPS-CABLE. (No code upload.)
cable and necessary software for use with
a PC
™
Manchester,
Hernis, Bosch® (Philips, Burle), Sensormatic®,
TASS, Vicon™, and NTCIP protocols.
OPTIONAL MOUNTS AND ADAPTERS
ECM100 Corner mount adapter for use with EWM wall
EPM Pole mount adapter for use with EWM wall
EA4348 EWM-to-Legacy adapter; use with PP4348
PM2000/PM2010 Pedestal mount with cable feedthrough.
mount
mount
parapet mount
For use with Esprit systems with EPP pedestal
adapter plate.
RECOMMENDED POWER SUPPLIES
MCS Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
FACTORY INSTALLED
RECEIVER/DRIVER
outdoor
INTEGRATED OPTICS PACKAGE (IOP) OR
PRESSURIZED INTEGRATED OPTICS
CARTRIDGE (IOC) IP67
OPTIONAL FACTORY
INSTALLED WIPER
MECHANISM
MEETS NEMA TYPE 4X/IP66
ENCLOSURE STANDARDS
Contract #GS-07F-9323S
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada
International
www.pelco.com
Tel (800) 289-9100 Fax (800) 289-9150
Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
TRANSFORMER
MODULE
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...