PRODUCT SPECIFICATION
ES30C/ES31C Series Positioning System
ESPRIT® SYSTEM WITH IOP CAMERA AND OPTIONAL WIPER
camera solutions
Product Features
• Receiver, Pan/Tilt, and Enclosure with an Integrated Optics Package
(IOP)
• Programmable Camera Settings
• Programmable Camera Title
• On-Screen Compass, Tilt, and Zoom Display
• Auto Iris with Manual Override
• Auto Focus with Manual Override
• AC Line Lock
• Variable Speed Pan: 0.1° to 100°/Sec with Proportional Pan
• 360° Continuous Pan Rotation
• Zone Blanking Allows up to 8 Zones (Programmable in Size) to be Set
to Output Blank Video
• Tilt Range of +33° to –83° from Horizontal
• Preset Positioning, Patterns, Multiple Scan Modes
• Designed for Minimal Maintenance, No Gears to Adjust
Pelco’s
ES30C/ES31C
®
Esprit
Positioning System features a
receiver, pan/tilt, enclosure, and Integrated Optics Package (IOP) in a
single, easy-to-install system. The IOP contains an autofocus camera
and lens module with programmable features.
For a wide range of applications, the
ES30C
and
ES31C Series
features a choice of three different IOP cameras:
• Day/night camera (540 TVL) with an infrared cut filter, 35X zoom lens
(35X optical, 12X digital), and electronic image stabilization
• Day/night camera (520 TVL) with an infrared cut filter and 24X zoom
lens (24X optical, 10X digital)
™
ES30C
color
and
• High resolution color camera (470 TVL) with LowLight
technology and 22X zoom lens (22X optical, 10X digital)
A powder-coated, aluminum construction makes the
ES31C
ideal for either indoor or outdoor applications. The system has
an absolute operating temperature range of –50° to 140°F (–45° to
60°C). Within two hours after power-up, the entire unit can de-ice and
be operational from a temperature of –13°F (–25°C).
ESPRIT IOP SYSTEM WITH WIPER
(SHOWN WITH WALL MOUNT AND POLE ADAPTER)
The
ES31C Series
includes a window wiper. The wiper is completely
integrated into the enclosure and does not interfere with the viewing
range of the system. The wiper can be programmed to delay between
wipes and to automatically shut off after a specified period. The wiper
design also allows for easy replacement of the wiper blade. A built-in
heater, window defroster/defogger, sun shroud, and insulation
blanket are standard features on the
ES30C
and
ES31C
units. All
units also include an open collector auxiliary output that functions for
two seconds before deactivating.
The
ES30C
and
ES31C Series
variable pan and tilt speeds range
from 0.1 to 40 degrees per second in manual pan mode and
0.1 to 20 degrees per second in manual tilt. Pan preset and turbo
speeds are 100 degrees per second in wind speeds of 50 mph and
50 degrees per second in the 90 mph wind-speed profile. Tilt preset
speed is 30 degrees per second. The
ES30C
and
ES31C
are capable
of 360 degrees of continuous pan rotation. The tilt range allows for
horizontal viewing of +33 to –83 degrees. There are 64 programmable
preset positions with a preset accuracy of one-quarter degree.
The systems are available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC. The
ES30C
and
ES31C
also
have a power-up recovery mode that allows the user to specify what
operation the system will resume whenever the power is cycled.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C307 / REVISED 11-10-09
TECHNICAL SPECIFICATIONS
ADDITIONAL PRODUCT FEATURES
• Deterrent Surveillance
• Integral Multiprotocol (Coaxitron
Receiver/Driver
• Digital Position and Zoom Control and Feedback Using Pelco D Protocol
• Integral Camera Enclosure
• Operational in 90 mph Winds, Can Withstand Wind Velocity up to
130 mph
• Pan Preset Speed of 100°/Sec in 50 mph Winds and 50°/Sec in 90 mph
Winds
• Variable Scan Speeds (1 to 40°/Sec)
• Translator Boards for Selected Competitive Protocols
• Easy to Install: Quick and simple electrical connections
• 24 VAC or 120/230 VAC Selectable
• Full Continuous-Duty Warranty
• 850 nm and 950 nm Active IR Illumination Focus Algorithms (24X and 35X
models only)
SOFTWARE/HARDWARE
• 64 Programmable Presets with Labels
• Auto, Frame, and Random Scan
• Programmable Power-up Mode
• Programmable Park
• Programmable Manual Limit Stops (Pan)
• Programmable Scan Limit Stops (Pan)
• Patterns
• Proportional Pan/Tilt
• 8 Zones (programmable in size) Can Be Labeled with up to 20 Characters
Each
• Up to 8 Zones (programmable in size) Can Be Set to Output Blank Video
• 10-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
• Sun Shroud, Heater/Window Defroster, and Insulation All Standard
• 1 Auxiliary Output
• Integrated Window Wiper with Programmable Delay and Shut-Off
(ES31C Models)
®
, RS-422 Pelco D and Pelco P Protocols)
MECHANICAL
Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +33° to –83°
Variable Pan/Tilt Speed
Pan 0.1° to 40°/sec variable-speed operation,
100°/sec Turbo
Tilt 0.1° to 20°/sec variable-speed operation
Preset Speeds
Pan 100°/sec
Tilt 30°/sec
Camera Mounting Integrated camera sled assembly
Latches One link-lock, No. 3 stainless-steel latch; can
be secured with padlock (not supplied)
GENERAL
Construction Die-cast, extruded and sheet aluminum;
Finish Gray polyester powder coat
Viewing Window 0.23" (5.84 mm) thick, optically clear impact/
Operating Temperature –50° to 122°F (–45° to 50°C) for sustained
Operating Environment Will remain operational in 90 mph wind
Weight With With
Unit
Standard with IOP 20 lb (9.0 kg) 22 lb (9.9 kg)
With Wiper and IOP 21 lb (9.5 kg) 23 lb (10.4 kg)
Shipping
Standard with IOP 25 lb (11.3 kg) 28 lb (12.6 kg)
With Wiper and IOP 26 lb (11.7 kg) 29 lb (13.1 kg)
stainless steel hardware
scratch-resistant coated Lexan
®
system operation or 140°F (60°C) absolute
maximum. Within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –13°F (–25°C).
conditions; withstands 130 mph
Pedestal Adapter
Wall Mount
ELECTRICAL
Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch
Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system
Heater and Defroster Thermostatically controlled
Electrical Connections 2 power source connections made at mount
Aux 2 Open collector output with 2-second
Video Coaxial Cable
Max. Wiring Distances Cable Type* Maximum Distance
*Minimum cable requirements:
75-ohms impedance; all-copper center conductor; all copper braided shield
with 95% braid coverage
selectable for 120/230 VAC inputs
location with wire splices and 1 ground wire
splice; 1 BNC receptacle and 4 wire splices at
mount location for RS-422 Pelco D and Pelco P
protocols; 2 wire splices for open collector
auxiliary output
activation; connected relay must require no
more than 32 VDC and 40 mA to energize relay
coil; wire length between Esprit and relay
must be less than 100 ft (30 m)
RG59/U 750 ft (229 m)
RG6/U 1,000 ft (305 m)
RG11/U 1,500 ft (457 m)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
• C-Tick
• Meets NEMA Type 4X and IP66 standards
• U.S. Patents 340,940 and 5,224,675
5.2
(13.3)
3.9
(9.9)
14.6
(37.0)
9.8
(24.9)
7.7
(19.7)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
3.6
(9.1)
13.3
(33.9)
7.9
(20.0)
17.45
(44.32)