Pelco ES3012-2N, ES3012-2W, ES3012-5 Specsheet

PRODUCT SPECIFICATION

camera solutions

ES3012 Series Integrated Positioning System

ESPRIT® PREMIUM PERFORMANCE P/ T, COAXITRON® COMPATIBLE

Product Features

• Integrated Receiver, Pan/Tilt, and Housing with No Exposed Cabling

• Optional ImagePak® Integrated Optics Package

• Quick and Simple Electrical Connections

• Variable Speed Advanced Motor Control Technology

• 360° Continuous Pan Rotation

• Zone Blanking Allows up to 8 Zones (Programmable in Size) to Be Set

to Output Blank Video

• Operational in 90 mph Wind Conditions; Can Withstand Wind

Velocity Up to 130 mph

• Pan Preset Speed of 100° Per Second in 50 mph Winds and

50° Per Second in 90 mph Winds

• Tilt Range of +33° to –83° from Horizontal

• Preset Positioning

• Designed for Minimal Maintenance, No Gears to Adjust

• Lightweight Aluminum Construction

• Meets NEMA Type 4X and IP66 Standards

Pelco’s
ingeniously integrates a pan/tilt, enclosure, and receiver into one
compact system that is easy to install. On-screen, user-friendly menus
also make the system easy to program and operate.

The

ES3012 Series

The

Esprit ImagePak

standard system with a factory-installed camera and lens package of
your choice. Choose from a variety of high resolution, day/night and
color cameras. The standard system does not include the camera and
lens components. It is designed to accept any 24 VAC camera and
lens combination up to 12.10" L x 3.45" W x 3.17" H (30.73 x 8.76 x

8.05 cm).

Every
window defroster/defogger, sun shroud, and insulation blanket. The
system is available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC.

®

Esprit

ES3012 Series

is available as a standard or ImagePak

ES3012

system (standard or ImagePak) has a built-in heater,

integrated positioning system

®

system combines the innovative design

system.

of the

ES3012-2W SYSTEM
WITH WALL MOUNT

A powder-coated, aluminum construction makes the
ideal for either indoor or outdoor applications. The system has an
absolute operating temperature range of –40° to 140°F (–40° to
60°C). Within two hours after power-up, the entire unit can de-ice
and be operational from a temperature of –13°F (–25°C).

The

Esprit ES3012 Series

0.5 degrees to 40 degrees per second in manual pan mode and

0.5 degrees to 20 degrees per second in manual tilt. Pan preset and
turbo speeds are 100 degrees per second in wind speeds of 50 mph
and 50 degrees per second in the 90 mph wind-speed profile. Tilt
preset speed is 30 degrees per second. The
of 360 degrees of continuous pan rotation. The tilt range allows for
horizontal viewing of +33 to –83 degrees. There are 64 programmable
preset positions with a preset accuracy of one-quarter degree.

The

ES3012 Series

and scan speed, limit stops, zone blanking, and patterns. The unit
also has a power-up recovery mode that allows the user to specify
what condition the system will resume whenever the power is
cycled.

variable pan and tilt speeds range from

ES3012 Series

features on-screen programmable menus for pan

ES3012 Series

is capable

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C306 / REVISED 1-15-10

TECHNICAL SPECIFICATIONS

ELECTRICAL

Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch

Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system
Camera and Lens Voltage 24 VAC
Heater and Defroster Thermostatically controlled
Electrical Connections Two power source connections made at

Video Coaxial Cable

Max. Wiring Distances Cable Type* Maximum Distance

*Minimum cable requirements:
75 ohms impedance; all-copper center conductor; all copper braided shield

with 95% braid coverage

selectable for 120/230 VAC inputs

mount location with wire nut splices and one
ground terminal; one BNC receptacle and four
terminals on interconnect PCB at mount
location

RG59/U 750 ft (229 m)
RG6/U 1,000 ft (305 m)
RG11/U 1,500 ft (457 m)

MECHANICAL

Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +33° to –83°
Variable Pan/Tilt Speed

Pan 0.5° to 40°/sec variable-speed operation,

100°/sec Turbo

Tilt 0.5° to 20°/sec variable-speed operation

Preset Speeds

Pan 100°/sec
Tilt 30°/sec

Camera Mounting Elongated holes on removable camera mount;

Maximum Camera and
Lens Size Accepts camera and lens combinations

Latches One link-lock, No. 3 stainless-steel latch;

17.3

(43.9)

supplied with an adapter bracket to
accommodate various heights of cameras

(including BNC connector) up to:

12.10" L x 3.45" W x 3.17" H
(30.73 x 8.76 x 8.05 cm)

can be secured with padlock (not supplied)

14.0

(35.5)

13.8

(35.1)

9.1

(23.2)

16.4

(41.7)

4.1

(10.5)

5.2

(13.3)

GENERAL

Construction Die-cast, extruded and sheet aluminum;

Finish Gray polyester powder coat
Viewing Window 0.18-inch (4.76 mm) thick, optically clear,

Window Viewing Area 2.25-inch (5.71 cm) diameter
Operating Temperature –40° to 122°F (–40° to 50°C) for sustained

Operating Environment Will remain operational in 90 mph wind

Unit Weight

ES3012-2, ES3012-5 20 lb (9.1 kg)
ES3012-2 or ES3012-5

with ImagePak option 25.7 lb (11.7 kg)

Shipping Weight

ES3012-2, ES3012-5 27 lb (12.3 kg)
ES3012-2 or ES3012-5

with ImagePak option 33 lb (14.8 kg)

stainless steel hardware

impact-resistant MR5 coated Lexan
HB rated)

system operation or 140°F (60°C) absolute
maximum. Within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –13°F (–25°C).

conditions; withstands 130 mph

CERTIFICATIONS/RATINGS/PATENTS

• CE, Class B

• FCC, Class B

• UL /cUL Listed

• C-Tick

• Meets NEMA Type 4X and IP66 standards

• U.S. Patents 340,940 and 5,224,675

LENS SPECIFICATIONS
(IMAGEPAK ESPRIT SYSTEMS ONLY)

Z10/Z10P Z20/Z20P Z30/Z30P

Type Motorized zoom Motorized zoom Motorized zoom

Format Size 1/3-inch 1/3-inch 1/3-inch

Focal Length 6 to 60 mm 5.6 to 112 mm 5.5 to 165 mm

Zoom Ratio 10X 20X 30X

Relative Aperture (F) 1.6 ~ 360 1.6 ~ 360 1.8 ~ 360

Operation

Iris Auto iris

(direct drive)

Focus and Zoom Motorized

Angle of View

Diagonal 9.7°~ 53.7° 3.2°~ 59.4° 2.1°~ 58.7°

Horizontal 7.8°~ 43.7° 2.6°~ 47.6° 1.7°~ 47.6°

Vertical 5.9°~ 33.0° 1.9°~ 35.7° 1.3°~ 33.9°

Min. Object Distance

4.8

(12.3)

†

Model numbers with “P” suffix are motorized with preset capability.

1.0 m 1.5 m 1.8 m

†

Auto iris
(direct drive)

Motorized

†

®

(UL 94

Auto iris
(direct drive)

Motorized

†

6.9

(17.5)

7.9

(20.2)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

7.7

(19.7)

TECHNICAL SPECIFICATIONS

CAMERA SPECIFICATIONS (IMAGEPAK ESPRIT SYSTEMS ONLY)

Ultra High Resolution, Day/Night High Resolution, Color, LowLight

C10DN-6 (AM) C10DN-6X (AN) CC3751H-2 (CL

Signal Format NTSC PAL NTSC PAL

Image Device 1/3-inch image format

Picture Elements 768 (H) x 494 (V) (approx. 380k) 752 (H) x 582 (V) 768 (H) x 494 (V) 795 (H) x 696 (V)

Scanning System 525 lines, 2:1 interlace 625 lines; 2:1 interlace 525 lines; 2:1 interlace 625 lines; 2:1 interlace

Horizontal Resolution 540 TVL 540 TVL 480 TVL 480 TVL

Minimum Illumination

B-W 0.07 lux, f/1.2, 40 IRE, AGC on,

Color 0.3 lux, f/1.2, 40 IRE, AGC on,

Sensitivity

B-W (SENS 40x) 0.08 lux, f/1.2, 50 IRE, AGC on,

Color (SENS 40x) 0.4 lux, f/1.2, 50 IRE, AGC on,

Electronic Shutter Range 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec 1/60 ~ 1/100,000 sec 1/60 ~ 1/100,000 sec

Signal-to-Noise Ratio > 50 dB >50 dB 50 dB 50 dB

Automatic Gain Control Selectable Selectable Automatic Automatic

Backlight Compensation Selectable Selectable On/off selectable On/off selectable

Signal Format NTSC PAL

Image Device 1/3-inch image format

Picture Elements 768 (H) x 494 (V) 752 (H) x 582 (V)

Scanning System 525 lines; 2:1 interlace 625 lines; 2:1 interlace

Horizontal Resolution 480 TVL 480 TVL

Minimum Illumination 0.5 lux at 40 IRE, f/1.2 0.5 lux at 40 IRE, f/1.2

Electronic Shutter Range 1/60 ~ 1/100,000 sec 1/60 ~ 1/100,000 sec

Signal-to-Noise Ratio 52 dB 52 dB

Automatic Gain Control On/off selectable On/off selectable

Backlight Compensation On/off selectable On/off selectable

Signal Format NTSC PAL

Image Device 1/3-inch image format

Picture Elements 768 (H) x 494 (V) (approx. 380k) 752 (H) x 582 (V) (approx. 440k)

Scanning System 525 lines, 2:1 interlace 625 lines, 2:1 interlace

Horizontal Resolution 540 TVL 540 TVL

Minimum Illumination 0.3 lux, f/1.2, 50 IRE, AGC on,

Electronic Shutter Range Selectable Selectable

Signal-to-Noise Ratio > 50 dB >50 dB

Automatic Gain Control Selectable Selectable

Backlight Compensation Selectable Selectable

Signal Processing DSP DSP

interline transfer CCD

75% scene reflectance

75% scene reflectance

89% scene reflectance

89% scene reflectance

High Resolution, Color, Extended Dynamic Range

CC3701H-2 (CB

interline transfer CCD

C10CH-6 (AJ) C10CH-6X (AK)

interline transfer CCD

75% reflectance

)

Ultra High Resolution, Color,

1/3-inch image format
interline transfer CCD

0.07 lux, f/1.2, 40 IRE, AGC on,
75% scene reflectance

0.3 lux, f/1.2, 40 IRE, AGC on,
75% scene reflectance

0.08 lux, f/1.2, 50 IRE, AGC on,
89% scene reflectance

0.4 lux, f/1.2, 50 IRE, AGC on,
89% scene reflectance

CC3701H-2X (CD

1/3-inch image format
interline transfer CCD

1/3-inch image format
interline transfer CCD

0.3 lux, f/1.2, 50 IRE, AGC on,
75% reflectance

™

DSS

)

1/3-inch image format
interline transfer CCD

0.01 lux at 40 IRE, f/1.2
—

——

——

——

)

CC3651H-2X (CM

1/3-inch image format
interline transfer CCD

0.01 lux at 40 IRE, f/1.2
—

)

MODEL NUMBERS

MODELS

Basic

ES3012-2 Standard Esprit integrated positioning

system (pan/tilt, enclosure and receiver),

24 VAC, no mount
ES3012-5 Same as ES3012-2 except 120/230 VAC
ES3012-2N Standard Esprit integrated positioning

system, 24 VAC, with EPP pedestal adapter

plate
ES3012-5N Same as ES3012-2N except 120/230 VAC
ES3012-2W Standard Esprit integrated positioning

system, 24 VAC, with EWM wall mount
ES3012-5W Same as ES3012-2W except 120/230 VAC

ImagePak Esprit Systems

Create a complete, ready-to-install system (including optics package) from the
optional components below or refer to the Esprit ImagePak Selection Guide
for model numbers.

ES3012-5CLZ 20PW

Esprit Series

ES3012

Primary Input Voltage

-2 = 24 VAC

-5 = 120/230 VAC

Camera Configuration

Color

AM = C10DN-6 Ultra High Res, Day/Night (NTSC)
AN = C10DN-6X Ultra High Res, Day/Night (PAL)
CL = CC3751H-2 High Res, LowLight (NTSC)
CM = CC3651H-2X High Res, LowLight (PAL)
CB = CC3701H-2 High Res, EDR (NTSC)
CD = CC3701H-2X High Res, EDR (PAL)
AJ = C10CH-6 Ultra High Res, color (NTSC)
AK = C10CH-6X Ultra High Res, color (PAL)

Lens Configuration

Z10 = 13ZD6X10 10X, 6-60 mm
Z10P = 13ZD6X10P 10X, 6-60 mm, with presets
Z20 = 13ZD5.6X20 20X, 5.6-112 mm
Z20P = 13ZD5.6X20P 20X, 5.6-112 mm, with presets
Z30 = 13ZD5.5X30 30X, 5.5-165 mm
Z30P = 13ZD5.5X.30P 30X, 5.5-165 mm, with presets

OPTIONAL MOUNTS AND ADAPTERS

ECM100 Corner mount adapter for use with EWM wall

EPM Pole mount adapter for use with EWM wall

EA4348 EWM-to-Legacy adapter; use with PP4348

PM2000/PM2010 Pedestal mount with cable feedthrough;

PP4348 Parapet mount; requires EWM wall mount

mount

mount

parapet mount

for use with Esprit systems with EPP pedestal
adapter plate

and EA4348 adapter when used with Esprit
system

OPTIONAL ACCESSORIES

IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount

IPS-RMK Remote monitor kit. Includes TFT-LCD monitor,

TXB Series Translator boards for model specific AD

video/data breakout box. Allows ground-level
control/progamming when used with the
IPS-RMK. (No code upload.)

PDA handheld, cables, and carrying case.
Allows viewing of camera video, local PTZ
control, and system setup.

™

Manchester, Hernis, Bosch® (Philips, Burle),
Sensormatic®, Vicon™, TASS, and NTCIP
protocols.

RECOMMENDED POWER SUPPLIES

MCS Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,

outdoor

RECOMMENDED CONTROLS

All Pelco multiplexer and matrix switchers (CM6700, CM6800,
CM9700 Series, MPT9000, and MX4000 Series) and PelcoNet™ Series.

RECOMMENDED KEYBOARD CONTROLS

(For use in Direct Mode operation only)
KBD200A Desktop keyboard, multispeed PTZ control
KBD300A Desktop keyboard, variable speed PTZ control

Note:

KBD keyboards require a remote keyboard wiring kit (KBDKIT) for direct
mode operation; allows two-wire control of up to 16 daisy-chained receivers
(or Esprit systems). Keyboards output Pelco P protocol at 4800 baud.

Mount Configuration

N = EPP pedestal adapter
W = EWM wall mount

Contract #GS-07F-9323S

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

Pelco, the Pelco logo, Coaxitron, ImagePak, and Esprit are registered trademarks of Pelco, Inc.

All product names and services identified throughout this document are trademarks or registered

trademarks of their respective companies. The absence of a trademark or registered trademark

from this document does not constitute a waiver of intellectual property rights.

Product specifications and availability subject to change without notice.

PelcoNet and LowLight are trademarks of Pelco, Inc.

©Copyright 2010, Pelco, Inc. All rights reserved.