Pelco EPM, ECM100 specification sheets
PRODUCT SPECIFICATION
ESPRIT SYSTEM MOUNTED ON EWM WALL MOUNT
WITH EPM POLE ADAPTER
EWM WALL MOUNT
EPM POLE ADAPTER
EPP PEDESTAL ADAPTER
EA4348 LEGACY
ADAPTER
ECM100 CORNER ADAPTER
Esprit® Series Mounts
CORNER, PEDESTAL, POLE, AND WALL
camera solutions
Product Features
• Low Cost
• For Use with Esprit
Pedestal, Pole, and Wall Applications
• Can Also Be Used in Parapet Applicatio
Appropriate Mount Adapter
• Constructed of Aluminum
• Features Cable Feedthrough
• Easy to Install
• For Indoor or Outdoor Applications
The Esprit® Series mounts include the EWM wall mount, EPM pole
mount, ECM100 corner mount, EPP pedestal adapter, and the EA4348
EWM-to-Legacy
All mounts are aluminum (exept for the EPP, which is made from 304
stainless steel) and feature a feedthrough opening to conceal electrical
cables. They have a gray, polyester powder coat finish.
The EWM wall mount is the essential component in this series. It can
be used as a stand-alone mount for wall applications or in conjunction
with the EPM pole mount, ECM100 corner mount, or PP100 parapet
mount. When used with the EA4348 adapter, the EWM can also be
mounted to a Legacy PP300L, PP301L, or PP4348 parapet mount.
®
Series Integrated Positioning Systems in Corner,
®
adapter.
ns When Used with
The EWM wall mount is easy to install and requires no special tools.
The Esprit integrated positionin g system attaches directly to the EWM
with three stainless-steel screws. The mount can be attached to any
vertical load-bearing surface with four fasteners suitable for the
mounting surface (not supplied). Stain less-steel nuts and washers are
supplied for attaching the EWM to th e mounting studs on the pole, corner, and parapet mounts.
The EPP pedestal adapter is designed to adapt an Esprit integrated
positioning system to pedestal mounts, such as the PM2000 or
PM2010. Three stainless-steel screws are provided to secure the
Esprit system to the adapter.
The EA4348 EWM-to-Legacy adapter can also be used to retrofit
corner-, pole-, and parapet-mounted Legacy systems with Esprit
integrated positioning systems. The EA4348 will make any CM400,
PA402, PP400, PP300L/PP301L, and PP4348 Legacy mount compatible
with the EWM wall mount.
C238 / Revised 7-17
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, Esprit, and Legacy ar e registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2017, Pelco, Inc. All rights reserved.
4.75
(12.07)
6.00
(15.24)
Ø0.37 (0.94), 8X
0.60 (1.52)
8.00
(20.32)
2.00 (5.08)
3.58
(9.09)
Ø3.00
ECM100
1.0 X 0.375
(2.54 X 0.95)
14.55
(36.96)
5.50
(13.97)
4.75
(12.06)
0.8 X 0.375
(2.03 X 0.95)
6.00
(15.24)
0.25
(0.64)
1.50
(3.81)
4.75
(12.06)
Ø 0.150 (0.381) 3X
3.00 (7.62) B.C.
Ø 3.00
(7.62)
7.00
(17.78)
8.00
(20.32)
2.46
(6.25)
2.75
(6.99)
EWM
EPP
EPM
EA4348
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
MODELS
ECM100 Esprit® corner mount; for use with EWM wall
EPP Esprit pedestal adapter; for use with PM2000/
EPM Esprit pole adapter; for use with EWM wall
EWM Esprit wall mount
EA4348 EWM-to-Legacy
GENERAL
Construction 304 Stainless Steel for EPP,
Finish Gray polyester powder coat
Mounting Method
ECM100 Attached to mounting surface with eight
EPP Attached to a compatible mount (such as the
EPM Attached to a pole with three stainless-steel
EWM Attached to the mounting surface with four
EA4348 Attached to Legacy corner, pole, or parapet
Cable Entry Cable feeds through the EWM mount into the
Maximum Load
EPP Not applicable
ECM100 75 pounds (34 kg)
EPM 100 pounds (45 kg)
EWM 30 pounds (14 kg)
EWM with EA4348 30 pounds (14 kg)
Weight
EPP 1.8 lb (0.8 kg) 2.2 lb (1.0 kg)
ECM100 3.0 lb (1.4 kg) 6.0 lb (2.7 kg)
EPM 2.2 lb (1.0 kg) 4.0 lb (1.8 kg)
EWM 1.5 lb (0.7 kg) 3.0 lb (1.4 kg)
EA4348 1.2 lb (0.5 kg) 3.0 lb (1.4 kg)
mount
PM2010 pedestal mount
mount
®
adapter; for use with PP300L,
PP301L, and PP4348 parapet mounts
Aluminum for ECM100, EPM, EWM, EA434B
fasteners (not supplied)
PM2000/PM2010) with four fasteners (not
supplied)
straps (supplied). Straps fit 3-inch (7.62 cm) to 8inch (20.32 cm) diameter pole.
fasteners (not supplied)
mount with four fasteners (nuts and split lock
washers supplied with Legacy mount)
Esprit system; ECM100, EPA, and EPM mounts
have a cable feedthrough hole in center
Unit Shipping
OPTIONAL MOUNT ADAPTERS
PP100 Parapet (wall) mount. Use with EWM wall mount
PP300L, PP301L Parapet (corner) mount. Use with EWM wall
PP4348 Parapet (rooftop) mount. Use with EWM wall
mount and EA4348 adapter
mount and EA4348 adapter
Pelco, Inc.
625 W. Alluvial, Fresno, California 93711 United States
USA & Canad
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
a Tel: (800) 289-9100 • FAX: (800) 289-9150
9.75 (24.76)
4.88 (12.39)
2X 3.25
(8.25)
2X 2.375
(6.03)
2X 2.25
(5.71)
4X Ø0.312 (0.79) HOLE
FOR ZHO3-1107-1705
4X Ø0.343 (0.87)
Ø2.00 (5.08)
2X 2.375
(6.03)
3.08
(7.82)
6.15
(15.62)
Loading...