Pelco EH20-P-H, EP20, EP21, EH20 Specsheet
PRODUCT SPECIFICATION
EH20 Series Enclosure
COMPACT, INDOOR/ENVIRONMENTAL, IP-ENABLED
camera solutions
Product Features
• Side Opening for Easy Access for Servicing and Installation
• High Reliability Die-Cast Construction
• Advanced Optics for Megapixel Camera Support
• Temperature Range from –30° to 50°C (–22° to 122°F)
• Meets IP66 and Type 4X Standards
• IK10 Mechanical Impact Resistance, Vandal Resistant
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• 24VAC, Power Over Ethernet (PoE), and Mains Power Models
• All Models Include Heater and Blower (Except EH20 and EH20-M)
• All Models Include Sun Shroud and Mount (Except EH20)
The EH20 Series is a rugged and highly reliable camera enclosure
with a side-hinged lid and adjustable sun shroud designed for easy
installation. Constructed from die-cast aluminum to IK10 and IP66,
the EH20 Series enclosure is designed to operate in a wide range
of environments and to protect electronic components in
temperatures from –30° to 50°C (–22° to 122°F).
The EH20 Series enclosure is designed for use with analog and IP
cameras that have both fixed and variable focal length lenses (with
or without auto iris operation). The side-hinged lid provides easy
access to the camera sled. Two adjustable glands (PG11) on the
bottom of the enclosure allow for easy installation of the power and
video cables.
All EH20 Series enclosures come standard with heater and blower
(except EH20 and EH20-M), a cable management wall mount bracket,
and sun shroud (except EH20). The en closure can also be ordered from
the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ethernet enclosure input voltage, 802.3af-compatible camera power, and
appropriate heater and blower power.
The EH20 Series is ideal for small- to medium-size analog and IP
cameras and can be mounted to Pelco’s EM20 (feedthrough wall
mount).
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4047 / NEW 1-03-18
TECHNICAL SPECIFICATIONS
6.22
(2.46)
5.51
(2.17)
8.94
(3.52)
15.75
(6.20)
1/4 - 20 UNC
5.00
(1.97)
5.00
(1.97)
MECHANICAL
Camera Mounting Single slot for adjustable camera positioning
Camera and Lens Size Accepts camera and lens combinations
Viewing Window 0.3 cm (0.118-inch) thick, high optic grade,
Viewing Area 8.89 x 7.62 cm (3.5" W x 3" H)
Cable Entry 2 x PG11 compression glands on bottom
Maximum Cable Diameters
PG11 1.00 cm (0.395 in.)
Cable Entry Holes Both cable entry holes are 1.87 cm (0.74-inch)
Lid Fastening Torx security screws
on camera sled
(including BNC connector)
up to 22.86 x 10.16 x 7.62 cm
(9.00" L x 4" W x 3.5" H)
soda lime glass
and will accept PG11 or 3/8-inch NPT conduit
fitting as is. Will accept PG13.5 or
1/2-inch NPT fittings if the holes are enlarged
to 2.22 cm (0.88-inch).
ELECTRICAL
Input Power 24 VAC, POE+, HPOE, 110 VAC–230 VAC
Input Voltage
PoE IEEE802.3at compatible (heaters disabled),
24 VAC ±10%, up to 30W (without camera), up to
110 VAC
–230 VAC ±10%, up to 30W (without camera), up to
Max Power Output to Camera 13W
HPOE (heaters enabled), PoE output to camera
43W (with 13W camera), 24 VAC output to
camera.
43W (with 13W camera), 12 VDC output to
camera.
CERTIFICATIONS*
• CE (Class A)
• ICES-003 (Class A)
• UL /cUL Listed
• UL/IEC 60950-22
• Meets Type 4X and IP66 standards
• IK10 Mechanical Impact Resistance (Mechanical enclosure only; not the
front window)
•KCC
•RCM
*At the time of this publication, these certifications are pending. Consult the
factory or our Web site (www.pelco.com).
GENERAL
Construction Die-cast aluminum, ADC10
Finish Alodine with gray polyester powder coat,
RAL7047
Environment Indoor/environmental ambient temperature
–30° to 50°C (–22° to 122°F)
Power via PoE+
–10° to 50°C (14° to 122°F)
Unit Length
Base 17.09 cm (6.73 in) W x 10.90 cm (4.29 in) H x
40.57 cm (15.97 in) L
Enclosure with Sunshroud 17.09 cm (6.73 in) W x 23.96 cm (9.43 in) H
and Wall Mount 47.14 cm (18.56 in) L
Weight Unit Shipping
EH20 2.50 kg (5.50 lb) 2.81 kg (6.20 lb)
EH20-M 2.91 kg (6.40 lb) 3.32 kg (7.32 lb)
EH20-2-H 3.14 kg (6.92 lb) 3.56 kg (7.84 lb)
EH20-3-H 3.43 kg (7.56 lb) 3.62 kg (7.98 lb)
EH20-P-H 3.13 kg (6.90 lb) 3.55 kg (7.82 lb)
VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.
EM20 Wall Mount (Included)
Construction Aluminum
Finish Alodine with gray polyester powder coat
Weight Unit Shipping
0.41 kg (0.90 lb) 0.56 kg (1.22 lb)
EH20 MOUNTING HOLE DIMENSIONS
RECOMMENDED CAMERAS
Sarix®, Sarix Professional, and the Sarix Enhanced series.
EM20 MOUNTING HOLE DIMENSIONS
Loading...