Pelco ENC5516-EUK Specsheet

PRODUCT SPECIFICATION

video management solutions

ENC5516 H.264 Direct-Attached Video Encoder

16 ANALOG CHANNELS, D1 AT 30/25 IPS

Product Features

• Direct-Attached Video Support for Digital Sentry®Network Video

Recorder

• Supports 16 Channels per Encoder

• Provides 16 Looping, Auto-Terminating Video Outputs

• H.264 Hardware Compression

• Up to 30/25 (NTSC/PAL) ips at CIF, 2CIF, and D1 per Input

• Frame Rates and Resolutions Configurable per Channel

• 16 Audio Inputs, 16 Alarm Inputs, and 4 Relay Outputs

Digital Sentry®ENC5516 video encoder is purpose-built to provide direct-attached support for analog cameras on the high-performance Digital Sentry network video recorder (NVR) platform, and provides unique and affordable support for IP migration. The ENC5516 is a convenient replacement for existing DVRs and lets customers leverage their existing analog wiring infrastructure.

Existing analog infrastructure means existing analog wiring structures must be supported. Use the ENC5516 for capturing the BNC connections from other recording systems. Directly attach up to four ENC5516s through supplied cables to one DSSRV to accommodate up to 64 analog cameras.

Add the ENC5516 to your DSSRV for an integrated, high-performance IP migration platform.

ENC5516

DSSRV

IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco representative to discuss your specific requirements.

International Standards

Organization Registered Firm;

ISO 9001 QualitySystem

C4000 / NEW 6-2-14

TECHNICAL SPECIFICATIONS

MODEL

ENC5516 16-channel, H.264, direct-attached video

encoder; requires ENC5400-4PORT Capture card (sold separately)

SUPPLIED ACCESSORIES

Power Adapter 12 V through auto-ranging DC (12 V, 6 A);

allows for redundant power

Power Cord Based on country designation

Note: Units shipped to China do not include power cords

Terminal Block 3, 5-pin terminal blocks

4, 10-pin terminal blocks Rack Mount 2, mounting brackets Rubber Feet 4 (for desktop)

VIDEO/AUDIO

Video Standards NTSC/PAL Video Encoding H.264, Main profile Video Resolutions

Analog Cameras NTSC PAL

D1 720 x 480 720 x 576 2CIF 720 x 240 720 x 288 CIF 352 x 240 352 x 288

Video Output 2 BNC connectors (1 for MUX and 1 for spot

monitor); 16 BNC looping video output Audio Input 16 channels Audio Format Pulse code modulation (PCM)

Sampling Resolution 8- or 16-bit Sampling Frequency 4, 8, 16, or 32 kHz

PTZ CONTROL

Interface 2; RS-422, RS-485, video in Protocol Pelco P, Pelco C, and Pelco D

FRONT PANEL INDICATORS

PWR1 Green when the power source is connected PWR2 Green when the power source is connected LINK Green when the host is turned on and a

connection is made between the encoder and

the host INFO Blinks green when the firmware is updating Video Input (1 to 16 Channels) Green when detecting an active video signal

on the corresponding video input connector

ENVIRONMENTAL

Operating Temperature 0° to 60°C (32° to 140°F) Operating Humidity 85% maximum relative humidity, non-

condensing

PHYSICAL

Dimensions 18.9 x 44.2 x 4.4 cm

(7.5" D x 17.4" W x 1.7" H) Unit Weight 2.7 kg (6 lb) Shipping Weight 5.4 kg (12 lb)

CERTIFICATIONS/RATINGS

• CE, Class A; meets EN50130-4 standard requirements

• FCC, Class A

• UL/cUL Listed

• CCC*

• KCC*

• TUV *As of the date of this publication, these certifications are pending.

Please consult the factory, our Web site www. pelco.com,orthe most recent B.O.S.S®update for the current status of certifications.

ALARMS/RELAYS

Alarms In 16 Relays Out 4

POWER

Power Consumption

Input Voltage 12 VDC (through supplied auto-ranging

90 to 240 VAC power adapter)

Current 2130 mA Power 25.56 W (maximum ±5%)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

Notice: Judgment as tothe suitability of the products for users’ purposes is solely the users’ responsibility. Users should refer to the Operation manuals for cautionary statements regarding user selected options and how they might affect video quality. Users shall determine the suitability of the products for their own intended application, picture rate and picture quality.Intheeventusers intend to use the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney regarding any particular requirements for such use.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.