Pelco ENC5416-US Specsheet

PRODUCT SPECIFICATION
video management solutions
ENC5416 H.264 Direct-attached Video Encoder
16 ANALOG CHANNELS, D1 AT 30/25 IPS
Direct-Attached Video Support for Digital Sentry® Network Video
Recorder
Supports 16 Channels per Encoder
Provides 16 Looping, Autoterminating Video Outputs
H.264 Hardware Compression
Up to 30/25 (NTSC/PAL) IPS at CIF, 2CIF, and D1 per Input
Frame Rates and Resolutions Configurable per Channel
16 Audio Inputs, Alarm Inputs, and Relay Outputs
Digital Sentry direct-attached support for analog cameras on the high-performance Digital Sentry network video recorder (NVR) platform and provides unique and affordable support for IP migration. The ENC5416 is a convenient replacement for existing DVRs and lets customers leverage their existing analog wiring infrastructure.
Existing analog infrastructure means existing analog wiring structures must be supported. Use connections that went to previous recording systems. Directly attach up to four accommodate up to 64 analog cameras.
Add the integrated, high-performance IP migration platform.
®
ENC5416
ENC5416s
ENC5416
video encoder is purpose-built to provide
ENC5416
through supplied cables to one DSSRV to
to your DSSRV and DS-NVs platforms for an
devices to capture BNC
ENC5416
DSSRV
TECHNICAL SPECIFICATIONS
MODEL
ENC5416 16-channel, H.264, direct-attached video
encoder
SUPPLIED ACCESSORIES
Power Adapter 12 V through autoranging DC (12 V, 6 A) DC (12
Power Cord Based on country designation
Terminal Block 3, 5-pin terminal blocks
Rack Mount 2, mounting brackets Rubber Feet 4 (for desktop)
V, 6 A)
Note:
Units shipped to China do not include
power cords
4, 10-pin terminal blocks
VIDEO/AUDIO
Video Standards NTSC/PAL Video Encoding H.264, Main profile Video Resolutions
Analog Cameras NTSC PAL
D1 720 x 480 720 x 576 2CIF 720 x 240 720 x 288 CIF 352 x 240 352 x 288 QCIF 176 x 120 176 x 144
Video Output 4 BNC connectors for spot monitor output,
Audio Input 16 channels Audio Format Pulse code modulation (PCM)
Sampling Resolution 8- or 16-bit Sampling Frequency 4, 8, 16, or 32 kHz
16 BNC looping video output
FRONT PANEL INDICATORS
Standby Green when unit is powered on Power Green when connection is made between unit
Link Green when host recognizes unit Aux Green when the firmware is updating update Video Input (1 to 16 Channels) Green when an active video signal is detected
and host system
on the corresponding video input connector
ENVIRONMENTAL
Operating Temperature 0° to 60°C (32° to 140°F) Operating Humidity 85% maximum relative humidity,
noncondensing
PHYSICAL
Dimensions 18.9 x 44.2 x 4.4 cm
Unit Weight 2.7 kg (6 lb) Shipping Weight 5.4 kg (12 lb)
(7.5" D x 17.4" W x 1.7" H)
CERTIFICATIONS/RATINGS
• CE, Class A; meets EN50130-4 standard requirements
• FCC, Class A
• UL/cUL Listed
• CCC*
• KCC*
• TUV *As of the date of this publication, these certifications are pending.
Please consult the factory, our Web site recent B.O.S.S
®
update for the current status of certifications.
www. pelco.com
, or the most
PTZ CONTROL
Interface 2 RS-422, RS-485, video in Protocol Pelco P and Pelco D
ALARMS/RELAYS
Alarms In 16 Relays Out 4
POWER
Power Consumption
Input Voltage 12 V DC (through supplied autoranging 90 to
Current 2130 mA Power 25.56 W (maximum
240 VAC power adapter)
±
5%)
Loading...