Pelco EM3512 Specsheet

PRODUCT SPECIFICATION

EM3512 Mount

WALL MOUNT, EH3512 ENCLOSURE, 24 VAC

camera solutions

Product Features

• Speciﬁcally Designed for EH3512 Enclosures That Use 24 VAC

• Wiring Concealed Inside Mount

• Video, Power Wiring Pre-Installed

• Adjustable Pan/Tilt Head

• Mounts to Wall or Electrical Box

• Pole, Corner Mount Adapters Available

The

EM3512

feedthrough wall mount provides an attractive indoor/

outdoor mount for

EH3512

enclosures that use 24 VAC power. Speciﬁcally, it is designed for use with the EH3512 enclosure (when a 24 VAC camera is installed), the EH3512-2, and the EH3512-2HD.

All wiring is concealed inside the mount. With the video and power wiring pre-installed, hook-up is easy and simple.

The mount can be attached to a wall surface or a single-gang electrical box. The PA3512 pole mount adapter is available for attaching the mount to a pole, and CM3512 corner mount adapter can be used for installation of the mount on the corner of a building.

3.57

(9.06)

4.88

(12.40)

EM3512 MOUNT WITH EH3512 ENCLOSURE

11.60 (29.46)

3.40

(8.63)

3.25

4.96 (8.25)

(12.59)

2.25

(5.71)

TOP

2.25

(5.71)

An adjustable head allows 320 degrees of horizontal rotation. Tilt adjustment can be up to 90 degrees above or below the horizontal position.

The

EM3512

is constructed of aluminum and has a gray powder coat

ﬁnish.

C277 / REVISED 1-06

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

U.S. Patents D-486,173 S and 6,824,318 B2

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODEL

EM3512 Light duty wall mount with manually

adjustable head

RELATED PRODUCTS

CM3512 Corner mount adapter for EM3512 mount PA3512 Pole mount adapter for EM3512 mount.

Stainless steel straps supplied. Straps ﬁt 3-inch (7.62 cm) to 8-inch (20.32 cm) diameter pole.

MECHANICAL

Pan Adjustment 320° Tilt Adjustment ±90° Locking Method Button screws; 1/8-inch hex wrench supplied

GENERAL

Environment Indoor/outdoor Construction Aluminum Finish Gray polyester powder coat

CERTIFICATIONS/PATENTS

• UL /cUL Listed

• U.S. Patents D-486,173 S and 6,824,318 B2

MOUNTING METHOD

Wall mount

Corner adapter Corner adapter attaches to mounting surface

Pole adapter Pole adapter attaches to a pole with two

Electrical box Electrical box attaches to wall stud with

Enclosure Mounting EH3512 enclosure attaches to mount with two

Cable Entry Through hole in mounting plate or through

Weights Unit Shipping

EM3512 1.95 lb (0.88 kg) 4 lb (1.81 kg) CM3512 2.20 lb (1.00 kg) 4 lb (1.81 kg) PA3512 1.40 lb (0.64 kg) 2 lb (0.91 kg)

Mount attaches to wall surface with four 1/4-inch diameter fasteners. Only two fasteners are required if mounting to a 2x4 stud. Fasteners are not supplied.

with four 1/4-inch diameter fasteners (not supplied). Includes hardware to attach mount to corner adapter

stainless steel straps (supplied). Straps ﬁt 3-inch (7.62 cm) to 8-inch (20.32 cm) diameter pole. Includes hardware to attach mount to pole adapter.

hardware (not supplied) sufﬁcient to penetrate wall stud 1 inch (2.54 cm). Electrical box includes screws to attach mount

1/4-20 x 7/8-inch Phillips screws (provided)

0.5-inch (1.27 cm) conduit opening in bottom of mount

CM3512

4.00

(10.16)

2.75

(6.98)

7.94

(20.18)

15.31

(38.88)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

8.62

(21.90)

6.00

(15.23)

PA3512

2.73

(6.93)

7.00 (17.77)

2.25

(5.71)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

Product speciﬁcations and availability subject to change without notice.

3.01

(7.64)

2.47

(6.27)

5.00

(12.70)

2.25

(5.71)

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.