Pelco EM1400 User Manual

C260M-C (3/00)
EM1400
Wall Mount

®

3500 Pelco Way,
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel [phone]
FAX [phone]

International Customers:
Tel [phone]
FAX [phone]

www.pelco.com

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service and installation personnel.

2. Installation shall be done in accordance with all local and national electrical and mechani­cal codes utilizing only approved materials.

3. Use only installation methods and materials capable of supporting four times the maxi­mum specified load.

4. Use stainless steel hardware to fasten the mount to outdoor surfaces.

5. To prevent damage from water leakage when installing a mount outdoors on a roof or
wall, apply sealant around the bolt holes between the mount and mounting surface.

The product and/or manual may bear the following marks:

This symbol indicates that there are important operating and maintenance instruc­tions in the literature accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.

DESCRIPTION

Pelco’s Model EM1400 Light Duty Wall Mount has been engineered for use with EH4010/
EH4014/EH4018 enclosures and light-to medium-weight cameras. It is designed for mounting
on any wall or vertical surface and is capable of supporting loads up to 20 pounds (9 kg).

NOTE:

Two hex head machine
screws for mounting the enclosure/
camera are supplied. Fasteners
to secure the mount to the de­sired mounting surface are not
supplied.

CAUTION:

Make cer­tain that the mounting
surface is able to sup-

port the full load of the mount,
enclosure, and camera.

The EM1400 has an adjustable head which allows mechanical positioning of the camera/
enclosure.

INSTALLATION

To install the EM1400 enclosure mount, perform the following steps.

1. Drill holes in mounting surface using the mount as a template, and attach the mount se­curely with fasteners of minimum 1/4-inch diameter (not supplied).

If you install the mount outdoors, rain water could leak through the holes for the mounting
bolts and damage the wall.

To prevent water damage, seal the bolt holes with an appropriate sealant. Apply the seal­ant around the bolt holes between the mount and the mounting surface.

2. Attach the enclosure or camera securely with the two 1/4-20 hex head screws provided.

3. Loosen the hex head bolts on the swivel head and adjust for pan rotation (360°) and tilt
angle (75° up or down). Tighten bolts and lock into place.

1.50

(3.81)

2.75

(6.99)

1.25

(3.18)

Ø .281 (7.13),
3X

2.86

(7.26)

Ø .343 (.87),
1X

3.48

(8.84)

Ø .281 (.713), 3X

4.25

(10.80)

10.53

(26.75)

(5.14)

11.36

(28.85)

2.13

1.68

(4.27)

2.00

(5.08)

3.37

(8.56)

2.78

(7.06)

(13.36)

5.26

SPECIFICATIONS

Pan
Adjustment: 360°

Tilt
Adjustment: ±75°

Construction: Aluminum
Finish: Gray polyester powder coat
Enclosure

Mounting: Two 1/4-20 x .625 hex head

machine screws (supplied)

Suggested
Mounting
Method: Secure to solid surface with

three 1/4-inch diameter fas­teners or to wall stud with
one 5/16-inch and one 1/4­inch fastener (not supplied).

Maximum
Load: 20 lb (9 kg)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.

WARRANTY AND RETURN INFORMATION

WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material
or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:

• Five years on FT/FR8000 Series fiber optic products.

• Three years on Genex® Series products (multiplexers, server, and keyboard).

• Three years on Camclosure® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera
models, which have a five-year warranty.

• Two years on standard motorized or fixed focal length lenses.

• Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.

• Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.

• Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).

• Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.months on DX
Series digital video recorders, NVR300 Series network video recorders, Endura™ Series
distributed network-based video products, and TW3000 Series twisted pair transmission
products.

• One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.

• Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or
accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting
from the specific use or application made of the Products. Pelco’s liability for any claim,
whether based on breach of contract, negligence, infringement of any rights of any party
or product liability, relating to the Products shall not exceed the price paid by the Dealer to
Pelco for such Products. In no event will Pelco be liable for any special, incidental or
consequential damages (including loss of use, loss of profit and claims of third parties)
however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also
have additional rights, which are subject to variation from state to state.

Dimensions: See Figure 1
Weight: Unit Shipping

1.6 lb (0.7 kg) 3.0 lb (1.4 kg)Figure 1. EM1400 Dimension Drawing

If a warranty repair is required, the Dealer must contact Pelco at [phone] or
[phone] to obtain a Repair Authorization number (RA), and provide the following
information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the

warranty conditions stated above, please include a written explanation with the product
when returned.

Method of return shipment shall be the same or equal to the method by which the item
was received by Pelco.

RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory
at [phone] or [phone] to obtain an authorization number (CA number if
returned for credit, and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods
to:

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:

If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:

Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699

Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA

Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: [phone]
Fax: [phone]

REVISION HISTORY

Manual # Date Comments

C260M-C 3/99 Revised to new format.
C260M-C 3/00 Revised Figure 1 per ECO# 00-5643.

® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy, and Camclosure are registered trademarks of Pelco.
™ Endura and ExSite are trademarks of Pelco. © Copyright 2000, Pelco. All rights reserved.