Pelco EHXME136-7X Specsheet

PRODUCT SPECIFICATION

camera solutions

ExSite® IP Series Fixed Explosionproof Camera System

NETWORK CAMERA SYSTEM WITH IOP CAMERA AND OPTIONAL WIPER

Product Features

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• H.264, MPEG-4, and MJPEG Compression

• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,

DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, mDNS (Bonjour

• Electropolished 316L Stainless Steel Construction

• Upright or Inverted Operation

• Manual 200° Pan and 180° Tilt Adjustments

• 2 Autofocus, High Resolution Integrated Optic Options

• Multilingual On-Screen Menus

• Password Protection

• Configurable Camera Settings

• On-Screen Zoom Display

• For Use in a Variety of Harsh and Hazardous Environments, Including

Marine Environments

• Up to 2 Simultaneous Video Streams

®

), and 802.1x (EAP)

• Web Viewing, up to 16 Cameras Simultaneously

• Open IP Standards

• ONVIF v1.02 Conformant

ExSite® IP Series Fixed has all of the features and functions of the
original ExSite fixed camera systems, while allowing you to control
and monitor video over an IP network from virtually anywhere in the
world. ExSite

IP Series Fixed is an explosionproof integrated

camera system with a built-in 100Base-TX network interface for live
streaming to any network application.

IP Series Fixed supports two simultaneous video streams.

ExSite

The two streams can be compressed in MJPEG, MPEG-4, and H.264
formats across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration. The H.264
compression video files are up to 20 times smaller than MJPEG,
making network video storage more affordable.

ExSite IP Series Fixed includes a high resolution day/night camera
with a removable infrared cut filter and 36X zoom lens (36X optical,
12X digital).

Web Interface

ExSite IP Series Fixed uses a standard Web browser for powerful

remote setup and administration. Up to 16 cameras can be viewed on
the same network.

Network protocols such as Secure Sockets Layer (SSL) configuration
for security certificates, Secure Shell (SSH) for remote logon, and
Quality of Service (QoS) for priority or guaranteed data flow can be
managed using a Web browser.

Systemization

ExSite IP Series Fixed easily connects to Pelco IP systems such as

®

version 1.5 (or later), MPEG-4; Endura version 2.0 (or later),

Endura
H.264; Digital Sentry® version 7.3 (or later); DX8100 version 2.0 (or
later); DX4700/DX4800 version 1.1 (or later); DX4700HD/DX4800HD
version 2.0 (or later); and DVR5100 version 1.5.4 (or later). The
camera also features open architecture connectivity to third-party
software. Pelco offers an application programming interface (API)
and software developer’s kit (SDK) for interfacing with Pelco’s IP
cameras.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1312 / REVISED 5-1-13

TECHNICAL SPECIFICATIONS

CAMERA/OPTICS

Day/Night (36X)

Signal Format NTSC, PAL

Scanning System 2:1 interlace

Image Sensor

Effective Pixels

NTSC
PAL

Horizontal Resolution

NTSC
PAL

Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)

Zoom 36X optical, 12X digital

Configurable Zoom Speed
(Optical Range)

Horizontal

Angle of View

Focus

Maximum Sensitivity at 35 IRE

NTSC 0.018 lux at 1/2 sec shutter (color);

PAL 0.015 lux at 1/1.5 sec shutter (color);

Sync System Internal/AC line lock, phase adjustable using

White Balance Automatic with manual override

Shutter Speed

NTSC
PAL

Iris Control Automatic Iris Control with manual override

Gain Control Automatic/OFF

Video Output 1 Vp-p, 75 ohms

Video Signal-to-Noise Ratio >50 dB

1/4-inch progressive scan CCD

768 (H) x 494 (V)
752 (H) x 582 (V)

540 TV lines
540 TV lines

2.9/4.2/5.8 seconds

57.2° at 3.3 mm wide zoom;

2.5° at 82.8 mm telephoto zoom

Automatic with manual override

0.55 lux at 1/60 sec shutter (B-W);

0.00018 lux at 1/2 sec shutter (B-W)

0.45 lux at 1/50 sec shutter (B-W);

0.00015 lux at 1/1.5 sec shutter (B-W)

remote control, V-Sync

Automatic (electronic iris)/manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000

TECHNICAL SPECIFICATIONS

VIDEO

Video Encoding H.264 base profile, MPEG-4, and MJPEG
Video Streams Up to 2 simultaneous streams; the second

Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,

Available Resolutions Resolution JPEG H.264 Base Profile MPEG-4

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Users

Unicast Up to 20 simultaneous users depending on

Multicast Unlimited users H.264 or MPEG-4

Security Access Password protected
Software Interface Web browser view and setup, up to

Pelco System Integration Endura 1.5 or later (MPEG-4) or Endura 2.0 or

Open API Pelco API or ONVIF v1.02
Minimum System Requirements

Processor Intel
Operating System Microsoft

Memory 512 MB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or

Web Browser Internet Explorer

Media Player

†

stream is variable based on the setup of the
primary stream

4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)

Width Height Format

Maximum

IPS

Recommended

Bit Rate

Maximum

IPS

Recommended

Bit Rate

Maximum

IPS

Recommended

704 480 NTSC 30 ips 5.4 Mbps 30 ips 1.9 Mbps 30 ips 2.0 Mbps

352 240 NTSC 30 ips 1.3 Mbps 30 ips 0.5 Mbps 30 ips 0.6 Mbps

704 576 PAL 25 ips 5.4 Mbps 25 ips 1.9 Mbps 25 ips 2.0 Mbps

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*,
SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH,
SSL, SMTP, FTP, mDNS (Bonjour

®

), and

802.1x (EAP)

resolution settings (2 guaranteed streams)

16 cameras

later (H.264); Digital Sentry 7.3 IP bundle 3 or
later; DX8100 Series 2.0 or later;
DX4700/DX4800 1.1 or later;
DX4700HD/DX4800HD 2.0 or later; and
DVR5100 version 1.5.4 or later

®

Pentium® 4 microprocessor, 1.6 GHz

®

Windows® XP, Windows Vista®,

Windows 7, or Mac

®

OS X 10.4 (or later)

32-bit pixel color resolution

®

Firefox

®

7.0 (or later) or Mozilla®

3.0 (or later)

Pelco Media Player or QuickTime® 7.6.5 for
Windows XP, Windows Vista, or QuickTime

7.6.4 for Mac OS X 10.4

Bit Rate

*Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.

†

This product is not compatible with QuickTime version 7.6.4 for Windows XP

or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.