PRODUCT SPECIFICATION
EXSITE PAN/TILT SERIES SHOWN WITH
WXM100 WALL MOUNT (NOT SUPPLIED)
ExSite® Series Explosionproof Camera System
FIXED AND PAN/TILT SYSTEMS WITH IOP CAMERA AND OPTIONAL WIPER
Product Features
• For Use in a Variety of Harsh and/or Hazardous Environments,
including Marine Environments
• Electropolished 316L Stainless Steel Construction
• Upright or Inverted Operation
• Both Fixed and Pan/Tilt Options
• Autofocus, High Resolution Integrated Optics Package (IOP) with 36X
Day/Night, Motion Detection, and 540 TVL Horizontal Resolution
• Multilingual On-Screen Menus
• Password Protection
• Configurable Camera Settings
• On-Screen Compass, Tilt, and Zoom Display
• Quick and Easy Installation
• Reliable, Maintenance-Free Brushless DC Stepper Motor and Timing
Belt Transmissions for Smooth and Accurate Positioning
• 2-Year Continuous-Duty Warranty
• Sun Shroud, Heater/Window Defroster, and Blower All Standard
The ExSite® Series are innovative integrated camera systems that
meet stringent explosionproof and dust-ignitionproof requirements.
ExSite Pan/Tilt Series not only combine a receiver, pan/tilt, and
enclosure in a single, easy-to-install system, but also includes an
Integrated Optics Package (IOP). The ExSite Fixed Series also
includes an IOP and can be installed in a standard or inverted position
and features manually adjustable 200 degrees of pan and 180 degrees
of tilt positioning. The Integrated Optics Package contains an autofocus camera and lens module with configurable features.
The ExSite Series features a day/night camera with a removable
infrared cut filter and a 36X zoom lens (36X optical, 12X digital).
The electropolished 316L stainless steel construction makes the
ExSite Series ideal for all kinds of environmental conditions including
marine applications. The system has an absolute operating
temperature range of –60° to 60°C (–76° to 140°F). Within two hours
after power-up, the entire unit can de-ice and be operational from a
temperature of –25°C (–13°F).
The ExSite Series include an optional window wiper. The wiper is
completely integrated into the enclosure. The wiper can be configured
to delay between wipes and to automatically shut off after a specified
period. A built-in heater, window defroster/defogger, sun shroud, and
blower are standard features on the ExSite Series. All units also
include three auxiliary output relays that can be configured for a variety
of uses.
• Configurable Locations of Labels and On-Screen Displays
• 7 Alarm Inputs, 3 Relay Outputs
The ExSite Pan/Tilt Series variable pan and tilt speeds range from
0.1 to 40 degrees per second in manual pan, tilt, and preset mode.
The ExSite Pan/Tilt Series is capable of 360 degrees of continuous
pan rotation. The tilt range allows for horizontal viewing of –90 to
+90 degrees. There are 80 preset positions with a preset accuracy of
±0.1 degree.
The systems are available with an input voltage of 24 VAC or with a
power source of 100 to 240 VAC. The ExSite Series also have a
power-up recovery mode that allows the user to specify what operation
the system will resume whenever the power is cycled.
ExSite Pan/Tilt Series feature built-in system memory in the power
module to store camera and location-specific pan/tilt settings,
including labels, presets, patterns, and zones. These settings are
automatically down-loaded if a new pan and tilt body is installed.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1300 / REVISED 6-24-15
TECHNICAL SPECIFICATIONS
4 PLCS. TYP.
10MM - 1.5MM X 14MM
ON A 4.75-INCH DIA. B.C.
EQUALLY SPACED
8.52
(3.354)
29.21 (11.5 )
26.8
(10.5
33.27 (13.1)
13.03
(5.13)
12.47
(4.91)
1.91
(0.75 NPT )
FIXED
PAN/TILT
PRODUCT FEATURES
All Models
• Built-in Menu System for Setup of Configurable Functions
• Autofocus with Manual Override
• Auto Iris with Manual Override
• NTSC/PAL
• Integral Multiprotocol Receiver/Driver
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D); Accepts
Competitive Control Protocol with Optional Translator Card
• On-Board Connector for
– Pelco VC-UTP Video Converter
– Pelco TXB Series Translator Boards for Use with Hernis and Other
Protocols
– Pelco FS85011A Series dmsr;km;trrg’kbtbrkFactory-Installed Fiber
Transmittor Boards
• Software Update and Setup Through Remote Data Port (IPS-RDPE-2)
• AC Line Lock
Fixed Models
• Manual 200° Pan and 180° Tilt Adjustments
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Pan/Tilt Models
• Variable Speed Pan: 0.1° to 40°/Second with Proportional Pan
• 360° Continuous Pan Rotation
• Tilt Range of +90° to –90° from Horizontal
• ±0.1° Preset Accuracy
• Preset Positioning, Patterns, Multiple Scan Modes
• Configurable Power-up Mode
• Configurable Park
• 80 Presets with Custom Camera Settings and Labels
• 8 Zones (configurable in size) Can Be Labeled with Up to 20 Characters
Each or Set to Output Blank Video
• Action on Alarm: Alarms can be individually configured for 3 priority
levels, to initiate a stored pattern, or to go to an associated preset when
received
• Resume After Alarm: Allows the pan/tilt to return to a previously
configured state after alarm acknowledgment or to its previous position
before alarm
• Patterns: Up to 4, on-screen, user-defined configurable patterns; includes
pan, tilt, zoom, and preset functions
• Proportional Pan/Tilt: Continually decreases pan and tilt speeds in
proportion to depth of zoom
• Variable Scan Speed: Scan speed can be configurable between 1° and
40°/sec
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
Note: Please contact Pelco for information on the dimensions of the
flameproof joints.
12.47
(4.91)
1.91
(0.75 NPT )
29.21 (11.5)
4 PLCS. TYP.
10MM - 1.5MM X 14MM
ON A 4.75-INCH DIA. B.C.
EQUALLY SPACED
42.01
(16.54)
14.07
(5.54)
18.08
(7.12)
33.37 (13.14)
(3.354)
8.52
13.03
(5.13)
TECHNICAL SPECIFICATIONS
GENERAL
Construction 316L stainless steel
Finish Electropolish
Viewing Window 12.7 mm (0.50-inch) thick, soda-lime
Operating Temperature –60° to 60°C (–76° to 140°F)
Storage Temperature –20° to 60°C (–4° to 140°F)
Storage Humidity 0% ~ 95% RH (noncondensing)
Pan/Tilt
Unit Weight 25 kg (55.1 lb)
Shipping Weight 33 kg (73 lb)
Effective Projected Area
(EPA) 40.8 square inches
Fixed
Unit Weight 11.33 kg (24.9 lb)
Shipping Weight 18.14 kg (40 lb)
Effective Projected Area
(EPA) 31.1 square inches
tempered glass
CAMERA/OPTICS
Day/Night (36X)
Signal Format NTSC, PAL
Scanning System 2:1 Interlace
Image Sensor
Effective pixels
NTSC
PAL
Horizontal Resolution
NTSC
PAL
Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)
Zoom 36X optical, 12X digital
Configurable Zoom Speed
(Optical Range)
Horizontal
Angle of View
Focus
Maximum Sensitivity
NTSC* 0.55 lux at 1/60 sec shutter (color)
PAL*
Sync System Internal/AC line lock, phase adjustable using
White Balance Automatic with manual override
Shutter Speed
NTSC
PAL
Iris Control Automatic Iris Control with manual override*
Gain Control Automatic/OFF*
Video Output 1 Vp-p, 75 ohms
Video Signal to Noise > 50 dB
*All values measured at 27 dB gain.
†
Manual control of camera setup functions can be done with CM6700,
CM6800, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500
controllers. Manual control of cameras cannot be done with CM7500,
MPT9000, or KBD9000 controllers.
1/4-inch Progressive Scan CCD
768 (H) x 494 (V)
752 (H) x 582 (V)
540 TV lines
540 TV lines
2.9/4.2/5.8 seconds
57.2° at 3.3 mm wide zoom;
2.5° at 82.8 mm telephoto zoom
Automatic with manual override
0.018 lux at 1/2 sec shutter (color);
0.055 lux at 1/60 sec shutter (B-W);
0.0018 lux at 1/ 2 sec shutter (B-W)
0.45 lux at 1/50 sec shutter (color);
0.015 lux at 1/1.5 sec shutter (color);
0.045 lux at 1/50 sec shutter (B-W);
0.0015 lux at 1/1.5 sec shutter (B-W)
remote control, V-Sync*
†
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000*
1/1.5 ~ 1/30,000*
ELECTRICAL
Input Voltage 24 VAC or 100 to 240 VAC, 50/60 Hz
Input Voltage Range ±10%
Power Consumption Maximum 60 W (120 VA) per system
Heater and Defroster Microprocessor controlled
Electrical Connections 6-foot pigtail wire harness with connections
for power, video, data control, alarm inputs,
and auxiliary outputs
Auxiliary Outputs 3 N/O or N/C relays, 32 VDC, 0.5 A. Relay 3 is
allocated specifically for an external washer
(not supplied by Pelco).
Alarm Inputs 7
MECHANICAL
Cable Entry One 1.91 cm (0.75-inch NPT) threaded
opening; one explosionproof sealable fitting
supplied
Pan Movement* 360° Continuous pan rotation
Vertical Tilt* Unobstructed +90° to –90°
Variable Pan/Tilt Speed*
Pan 0.1° to 40°/sec variable-speed operation
Tilt 0.1° to 40°/sec variable-speed operation
Preset Speeds*
Pan 40°/sec
Tilt 40°/sec
*Only applicable for pan/tilt models.
CERTIFICATIONS/RATINGS
•FCC
• UL/cUL Listed
• UL/cUL Hazardous Locations Listed per NEC Division and Zone
requirement
Class I, Groups A, B, C, and D
Class II, Groups E, F, G, T6
Class I, Zone 1, AEx d IIC
AEx tb IIIC T85°C IP66
• BR-Ex d IIC, T6, IP66
UL-BR 13.0060X
• IECEx UL 11.0007X
• Ex d IIC T6 Gb
• Ex tb IIIC T85°C Db IP66
• DEMKO 04 ATEX 0413858X
0539 II 2 G Ex d IIC, T6 Gb
II 2 D Ex tb IIIC T85°C Db IP66
• Tamb –60°C to 60°C
• NEPSI-China, Ex d IIC, T5, Cert No. GYJ05584
•C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X standards
• Lloyd’s Register Type Approval: Marine, offshore, and industrial
installations for use in environmental categories ENV1, ENV2, and ENV5;
Certificate No. 06/60001
RELATED PRODUCTS
WXM100 WALL MOUNT
RECOMMENDED MOUNTS
WXM100 Wall mount designed to mount the
ExSite Series system directly to a
load-bearing vertical surface
PXM100 Pedestal mount designed to mount an
ExSite Series system directly to a horizontal
surface in either an upright or inverted
position
CMXM100 Corner adapter for use with the WXM100 to
mount an ExSite Series system to the corner
of a structure
PAXM100 Pole adapter for use with the WXM100 to
mount a system to a vertical pole or with a
PXM100 to mount a system to a horizontal
pole; recommended pole diameter is 10.16 to
22.86 cm (4 to 9 inches)
GENERAL
Construction
Mounts Electropolished 304 stainless steel
PAXM100 Mounting Straps 316 stainless steel
Maximum Load
WXM100 33.00 kg (73 lb)
CMXM100 38.50 kg (85 lb)
PAXM100 40.00 kg (88 lb)
PXM100 35.83 kg (79 lb)
Unit Weight
WXM100 5.62 kg (12.4 lb)
CMXM100 3.45 kg (7.6 lb)
PAXM100 4.17 kg (9.2 lb)
PXM100 0.60 kg (1.3 lb)
Shipping Weight (approximate)
WXM100 7.71 kg (17 lb)
CMXM100 5.89 kg (13 lb)
PAXM100 6.35 kg (14 lb)
PXM100 1.81 kg (4 lb)
MECHANICAL
Mounting Method
WXM100, CMXM100*,
and PXM100
PAXM100* Steel pole with a diameter
* Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with lock washers are supplied with the CMXM100 and PAXM100 to be used with
the WXM100 wall mount or PXM100 pedestal mount.
Recommended
Mounting Surface
Solid concrete with the
recommended strength of
3,600 psi or 25 Mpa
Steel I beam with a
minimum of 1/8-inch wall
of 4 to 9 inches
(10.16 to 22.86 cm)
Recommended Hardware
Five 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch
thread length, stainless steel hex head bolts with stainless steel lock washers (not supplied)
Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless steel lock
washers and 3/8-16 stainless steel nuts (not supplied)
Four 5/8-inch wide x 40-inch (101.6 cm) long stainless steel straps to attach the adapter to a
pole (supplied)
20.32
(8.00)
8.89
(3.50)
8X Ø 0.433 THRU EQ SP
ON A 4.75 B.C.
37.97
(14.95)
17.78
(7.00)
5X Ø 0.422
14.58
(5.74)
RELATED PRODUCTS
5X THREADED HOLES
FOR 3/8-16 SS BOLTS (SUPPLIED)
(14.9)
37.8
20.7
(8.15)
14.1
(5.5)
23.5
(9.25)
CMXM100 CORNER ADAPTER
PAXM100 POLE ADAPTER
PXM100 PEDESTAL MOUNT
Note: Designed for use with a WXM100 wall mount.
Note: Designed for use with a WXM100 to mount a system to a vertical pole or a
PXM100 to mount the system to a horizontal pole. Recommended pole diameter is
10.16 to 22.86 cm (4 to 9 inches).
4X 0.433 THRU
Ø
EQ SP ON A 4.75 B.C.
Ø
4X 0.433 THRU
Ø
EQ SP ON A 7.00 B.C.
4X 0.413 THRU EQ SP
Ø
ON A 7.00 B.C.
Ø
20.3
(8.00)
Ø
4X 0.433 THRU
Ø
EQ SP ON A 7.25 B.C.
Ø
0.15
(0.60)
15.87
(Ø6.25)
14.42
(Ø5.68)
1.37
(0.538)
11 X THREADED HOLES
FOR 3/8-16 SS BOLTS (SUPPLIED)
25.4
(10.00)
8.33
(3.28)
8.9
(3.5)
21.6
(8.50)
Pelco, the Pelco logo, and other tr ademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective compani es.
Product specifications and availability are subject to change without notice.
©Copyright 2015, Pelco, Inc. All rights reserved.
0.55 (0.22)
17.65 (6.95)
15.65 (6.16)
9.09 (3.58)
23.65 (9.31)
21.65 (8.52)
EXAC MOUNTING BRACKET
EXAC JUNCTION BOX
MODEL NUMBERS
SYSTEM MODEL NUMBERS
Model Format 24 VAC 100-240 VAC
Standard
Pan/Tilt
With Wiper*
Standard
Fixed
With Wiper*
NTSC
PAL
NTSC
PAL
NTSC
PAL
NTSC
PAL
COMPONENT MODEL NUMBERS
Power Module
IPSXM-2 24 VAC
IPSXM-7 100 to 240 VAC
IPSXM3036-2
IPSXM3036-2X
IPSXM3136-2
IPSXM3136-2X
EHXM3036-2
EHXM3036-2X
EHXM3136-2
EHXM3136-2X
PTZ or
Enclosure
IPSXMPT30
PTZ No Wiper
IPSXMPT31
PTZ With
Wiper*
EHXM30
Fixed No Wiper
EHXM31
Fixed With
Wiper*
Day/Night 420X
Camera Module
IPSXM3036 NTSC, no wiper
IPSXM3036X PAL, no wiper
IPSXM3136 NTSC, with
wiper*
IPSXM3136X PAL, with wiper*
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
IPSXM3036-7
IPSXM3036-7X
IPSXM3136-7
IPSXM31367X
EHXM3036-7
EHXM3036-7X
EHXM3136-7
EHXM3136-7X
*When cameras with wipers are in full wide zoom or 1X zoom, the wiper is
visible in the upper-right corner of the video.
OPTIONAL ACCESSORIES
TXB Series
IPS-CABLE Remote monitor cable and software kit.
IPS-RDPE-2
VC-UTP Converts video for use with unshielded
FS85011A Series
EXAC Factory-installed 1.5 m (5 ft) increased safety
†
If TXB or FS85011A boards are installed, remote upload of system software
will not be possible.
†
†
†
Translator boards for AD Manchester, Hernis,
®
Bosch
(Philips®, Burle), Sensormatic®,
TASS, Vicon
™
, and NTCIP™ protocols.
Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/configuration when used with the
IPS-CABLE.
twisted pair (UTP); cannot be used
simultaneously with TXB translator boards.
Factory-installed fiber transmitter sends one
unidirectional composite video channel and
one bidirectional data channel over on
multimode or single-mode fiber optic cable.
Supported models include FS85011AMSTEX,
FS85011ASSTEX, and FS85011ASFCEX.
(Ex e) potted cable interface and junction box
with flexible armored conduit and screwdown terminal for quick connection and easy
installation.
1.25 (0.49)
0.80 (0.31)
0.70 (Ø 0.28)
0.70 (0.28)
4.35 (1.71)
0.25 (0.10)2.50 (0.98)
2.30
(0.91)
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
4.05 (1.59)
1.00 (0.39)
1.45 (0.57)
Loading...