Page 1
PRODUCT SPECIFICATION
EHX*E Series Enclosure
SPECIALTY, OUTDOOR, EXPLOSIONPROOF
camera solutions
Product Features
• Aluminum Construction
• Adjustable Mounting Cradle
• Available in 10.16 cm (4 in.), 15.24 cm (6 in.), and 20.32 cm (8 in.)
Diameters
• For use in a Variety of Harsh and Hazardous Environments, including
Marine Environments
• Meets NEMA Type 4X and IP66 Standards
• Use with Fixed Mount or Explosionproof Pan/Tilt
The EHX*E Series explosionproof camera enclosures are designed
to meet the rigorous requirements of explosionproof and dustignitionproof electrical equipment for installation and use in
hazardous locations throughout the world. These enclosures are also
waterproof and dust tight.
Constructed of aluminum, the EHX*E Series enclosures in this
series are available in 10.16 cm (4 in.), 15.24 cm (6 in.), and 20.32 cm
(8 in.) diameters to accommodate most camera and lens
combinations. A unique camera mounting sled and track assembly
allows fast, easy positioning of the camera and lens and can be
securely locked in place.
EHX6E ENCLOSURE
ENCLOSURE WITH SUN SHROUD
Field-installed accessories include optional heater, blower, and sun
shroud.
You can use the EHX*E Series in fixed mount applications or with
Pelco’s PT1260EX Series explosionproof pan/tilt.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C417 / REVISED 5-2-13
Page 2
TECHNICAL SPECIFICATIONS
MECHANICAL
Cable Entry 2 explosionproof sealable fittings (supplied);
Front Window Fully tempered plate glass
EHX4E 10.80 cm (4.25 in.) diameter,
EHX6E/EHX6E-16 11.43 cm (4.50 in.) diameter,
EHX8E 14.92 cm (5.75 in.) diameter,
Window Viewing Area
EHX4E 8.10 cm (3.19 in.) diameter
EHX6E/EHX6E-16 7.62 cm (3.00 in.) diameter
EHX8E 10.80 cm (4.25 in.) diameter
Camera Mounting Adjustable sled
Maximum Camera
and Lens Size* Height
(Without Blower or Heater)
EHX4E 6.990 8.570 30.480 7.620
EHX6E 9.530 11.110 60.960 12.700
EHX6E-16 9.530 11.110 40.640 12.700
EHX8E 14.600 13.020 60.960 18.540
(With Heater Only)
EHX4E (only) 6.990 8.570 26.350 7.620
(With Blower Only or Blower and Heater)
EHX4E 6.990 8.570 22.860 7.620
EHX6E 9.530 11.110 56.520 12.700
EHX6E-16 9.530 11.110 36.200 12.700
EHX8E 14.600 13.020 56.520 18.540
*Assumes lens is fully extended.
†
Values in parentheses are inches; all others are centimeters.
1.27 cm (0.50-inch) maximum inside diameter;
pipe plug supplied for possible unused gland in
rear plate
1.21 cm (0.475 in.) thick
1.27 cm (0.50 in.) thick
1.27 cm (0.50 in.) thick
†
Width
†
Length†Diameter
(2.750) (3.375) (12.000) (3.000)
(3.750) (4.375) (24.000) (5.000)
(3.750) (4.375) (16.000) (5.000)
(5.750) (5.125) (24.000) (7.300)
(2.750) (3.375) (10.375) (3.000)
(2.750) (3.375) (9.000) (3.000)
(3.750) (4.375) (22.250) (5.000)
(3.750) (4.375) (14.250) (5.000)
(5.750) (5.125) (22.250) (7.300)
†
GENERAL
Construction Aluminum, pipe 6061T6
Weight Unit Shipping
EHX4E 6.79 kg (15 lb) 8.60 kg (19 lb)
EHX6E 14.04 kg (31 lb) 16.30 kg (36 lb)
EHX6E-16 12.23 kg (27 lb) 14.49 kg (32 lb)
EHX8E 20.41 kg (45 lb) 24.04 kg (53 lb)
Operating Temperature –20° to 55°C (–4° to 131°F)
Page 3
TECHNICAL SPECIFICATIONS
RECOMMENDED MOUNTS
EHX4E EM1109, Medium duty mount for horizontal/
EHX6E/EHX8E PM2000, Pedestal/ceiling mount; maximum load
Adapters AH2000 Adjustable head
‡
Use with AH2000 adjustable head.
EM2000, vertical pipe or pole; maximum load
EM2200 18.1 kg (40 lb)
EM22 Medium duty wall mount; maximum load
18.1 kg (40 lb)
MM22 Medium duty ceiling/pedestal mount;
maximum load 18.1 kg (40 lb)
‡
PM2010
WM2000
56.62 kg (125 lb)
‡
Wall mount; maximum load 34 kg (75 lb);
increased to 68 kg (150 lb) when used
with ST1 strut
WM3026 Heavy duty wall mount with adjustable
head; maximum load 136 kg (300 lb)
STI Support strut
RECOMMENDED PAN/TILT
PT1260EX Series Heavy duty explosionproof pan/tilt;
maximum load 45.4 kg (100 lb)
OPTIONAL ACCESSORIES
Blower Kit BKX4000 Continuous duty blower kit for EHX4E
BKX4024 Same as BKX4000 except 19.4 cfm,
BKX6000 Continuous duty blower kit for EHX6E and
BKX6000/220 Same as BKX6000 except 8 cfm,
BKX6024 Same as BKX6000 except 19.4 cfm,
Heater Kit HKX4-1
HKX4-2
HKX4-3
HKX6-1
HKX6-2
HKX6-3
§
§
§
§
§
§
HKX8/10-1
HKX8/10-2
HKX8/10-3
Sun Shroud SSEHX4E Sun shroud for EHX4E only
SSEHX6E Sun shroud for EHX6E only
SSEHX6E-16 Sun shroud for EHX6E-16 only
SSEHX8E Sun shroud for EHX8E only
Other EHX*EORKIT O-ring kit for EHX*E Series; consult
§
Heaters activate on at 4°C (40°F) and off at 15°C (60°F).
only, 10 cfm, 120 VAC, 3.8 W at 60 Hz
24 VDC (AC rectified), 1.92 W
EHX8E, 10 cfm, 120 VAC, 3.8 W at 60 Hz
230 VAC, 9.6 W at 50 Hz
24 VDC (AC rectified), 1.92 W
Heater kit for EHX4E only. 120 VAC, 40 W
Same as HKX4-1 except 24 VAC
Same as HKX4-1 except 230 VAC, 80 W
Heater kit for EHX6E only, 120 VAC, 80 W
Same as HKX6-1 except 24 VAC
Same as HKX6-1 except 230 VAC
§
Heater kit for EHX8E only, 120 VAC, 107 W
§
Same as HKX8-1 except 24 VAC
§
Same as HKX8-1 except 230 VAC
factory for applicable model numbers
CERTIFICATIONS/RATINGS
•CE
•UL/cUL
• Classified by Underwriters Laboratories Inc. as to explosion and fire
hazard only
• UL 1203 - Edition 4
• UL 60079-0 - Edition 5
• UL 60079-1 - Edition 6
• CSA C22.2 NO. 30
• CSA C22.2 NO. 25
• CSA C22.2 NO. 60079-0:11
• CSA C22.2 NO. 60079-1 :11
• IEC 60079-0 - Edition 6
• IEC 60079-1 - Edition 6
• IEC 60079-31 - Edition 1
• CENELEC EN 60079-0 - lssue Date 2012
• CENELEC EN 60079-1 - lssue Date 2007/07/01
• CENELEC EN 60079-31 - lssue Date 2009/12/01
• Type 4X enclosure for use in hazardous locations
• Class I, Groups C and D – Class II, Groups E, F, and G
• Class I, Zone 1, AEx d IIB, Ex d IIB
• Empty enclosure with Ex component certificate
• 03 ATEX 0318166U
• 0539 II 2 G Ex d IIB Gb
• II 2 D Ex tb IIIC Db IP66
• IECEx UL 12.0017U
•Ex d IIB Gb
• Ex tb IIIC Db IP66
• Suitable for marine outside (saltwater) use, for vessels over 1981.2 cm
(65 feet) in length
• Maximum o-ring service temperature 70°C (158°F)
Page 4
MODEL NUMBERS
MODELS
EHX4E Explosionproof enclosure, 10.16 cm diameter x
EHX6E Explosionproof enclosure, 15.24 cm diameter x
EHX6E-16 Same as EHX6E except 40.64 cm (16 in.) length
EHX8E Explosionproof enclosure, 20.32 cm diameter x
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
30.48 cm length (4 x 12 in.)
60.96 cm length (6 x 24 in.)
60.96 cm length (8 x 24 in.)
A
E
DIM EHX4E EHX6E-16 EHX6E EHX8E
B
FD
G
12.70
(5.00)
17.78
H
(7.00)
15.87
(6.25)
22.86
(9.00)
EHX6E/8E
MOUNTING CRADLE
A Ø17.78 (7.00) Ø20.32 (8.00) Ø20.32 (8.00) Ø25.72 ( 10.13)
B Ø11.43 (4.50) Ø16.83 (6.63) Ø16.83 (6.63) Ø21.92 (8.63)
C Ø17.78 (7.00) Ø22.23 (8.75) Ø22.23 (8.75) Ø33 .02 (13.00)
D Ø8.10 (3.19) Ø7.62 (3.00) Ø7.6 2 (3.00) Ø10.80 (4.25)
E 17.15 (6.75) 19.94 (7.85) 19.94 (7.85) 24.51 (9.65)
F 36.20 (14.25) 47.50 (18.70) 67.82 (26.70) 67.74 (26.67)
G 46.36 (18.25) 57.66 (22.70) 77.98 (30.70) 77.90 (30 .67)
H N/A 21.77 (8.57) 21.77 (8.57) 23.16 (9.12)
C
5.08
(2.00)
15.24
(6.00)
EHX4E
MOUNTING CRADLE
1/2”NPT
CONDUIT
ENTRY
7.62
(3.00)
1/4-20
PEMNUT 2X
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trademarks associa ted with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliate s. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All ot her product names and
Product specifications and availability are subject to change without notice.
services are the property of their respective companies.
©Copyright 2013, Pelco, Inc. All rights reserved.
Loading...