Pelco EH8106-1, EH8104-1, EH8106-3, EH8104-3 Specsheet

PRODUCT SPECIFICATION

EH8100 Series Enclosure

SPECIALTY, OUTDOOR, PRESSURIZED

camera solutions

Product Features

• 4- or 6-Inch Diameter

• For Use with Cameras with Fixed Focal Length or Motorized Lenses

• Indoor/Outdoor Applications

• For Use with Fixed Mount or Pan/Tilt

• Meets NEMA Type 6 and IP67 Standards

• Thermostat Controlled Heater(s), Standard Feature

• Easy Access for Service and Installation

• Legacy®-Compatible Version Available (EH8106L Only)

Pelco’s

EH8100 Series

sealed and pressurized outdoor enclosure is
designed to protect camera and lens components in adverse environ­mental conditions. The pressurized enclosure increases the camera
reliability and reduces the cost of maintenance.

The

EH8100 Series

enclosure is easily sealed and pressurized in the
field with dry nitrogen to prevent impurities from contaminating
camera and lens components. A pressure relief valve prevents
over-charging of the enclosure.

EH8106 ENCLOSURE

ENCLOSURE WITH SUN SHROUD

NOTE: VALUES IN PARENTHESES ARE INCHES;

ALL OTHERS ARE CENTIMETERS.

A

B

C

The

EH8100 Series

has lens preset capabilities and is designed for

cameras with fixed focal length or motorized zoom lenses.

Constructed of aluminum, the

EH8100 Series

features an adjustable
mounting cradle, sled and track assembly for camera mounting, and
a T-handle on the rear plate for easy access to the camera and lens.
Power, video, and lens control cables are routed through an MS-type
connector on the rear of the enclosure.

An optional sun shroud is available that helps protect the enclosure
from direct sunlight and reduces the internal temperature by
approximately 6° to 10°C (10° to 15°F).

The

EH8100 Series

can be used in fixed mount applications or with

a medium duty pan/tilt, such as our PT570 Series.

D

F

11.43
(4.50)

16.51
(6.50)

15.24
(6.00)

E

13.97
(5.50)

17.78
(7.00)

1/4-20 NUT PRESS 2X

31.57

43.18

(12.50)

(17.00)

33.02

50.80

(13.00)

(20.00)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

7.62

2.33

(3.00)

(0.92)

17.78

2.23

(7.00)

(0.88)

C410 / REVISED 5-17-11

5.08

(2.00)

G

AB CD EFG

EH8104

EH8106

45.72

(18.00)

55.88

(22.00)

TECHNICAL SPECIFICATIONS

MODELS

EH8104-1 Pressurized enclosure with two 120 VAC

EH8104-3 Pressurized enclosure with two 230 VAC

EH8106-1* Pressurized enclosure with two 120 VAC

EH8106-3* Pressurized enclosure with two 230 VAC

heaters; 10.16 cm (4-inch) inside diameter

heaters; 10.16 cm (4-inch) inside diameter

heaters; 15.24 cm (6-inch) inside diameter

heaters; 15.24 cm (6-inch) inside diameter

ELECTRICAL

Input Voltage

EH8104-1, EH8106-1 120 VAC
EH8104-3, EH8106-3 230 VAC

Power Consumption

EH8104 Series 40 W
EH8106 Series 80 W

Heater

EH8104-1 2 at 20 W each, 120 VAC
EH8104-3 2 at 20 W each, 230 VAC
EH8106-1 2 at 40 W each, 120 VAC
EH8106-3 2 at 40 W each, 230 VAC

Heater(s) are thermostatically controlled to
activate at 4°C (40°F) and turn off at

15°C (60°F)
Connector 16-pin receptacle with jam nut
Mating Connector MS-type connector (supplied)
Maximum Cable Distances

120 VAC EH8104 Series EH8106 Series

16 AWG (1.5 mm2) 1,365 m (4,477 ft) 682 m (2,238 ft)
18 AWG (1.0 mm2) 860 m (2,821 ft) 430 m (1,410 ft)
20 AWG (0.5 mm2) 540 m (1,773 ft) 270 m (886 ft)

230 VAC

16 AWG (1.5 mm2) 15,014 m (16,449 ft) 2,507 m (8,224 ft)
18 AWG (1.0 mm2) 3,159 m (10,364 ft) 1,579 m (5,182 ft)
20 AWG (0.5 mm2) 1,985 m (6,514 ft) 993 m (3,257 ft)

MECHANICAL

Front Window

EH8104 Series 4-inch diameter tempered glass, 0.225-inch

EH8106 Series 6-inch diameter tempered glass, 0.225-inch

Camera Mounting Multiple mounting holes on camera sled

Maximum Camera
and Lens Size Accepts camera and lens combinations

EH8104 35.56 x 6.35 x 6.35 cm

EH8106 45.72 x 10.16 x 10.16 cm

Enclosure Mounting Adjustable cradle secured with type 316

Purge Fitting Standard Schrader valve to allow enclosure to

Purge Relief Fitting Prevents over pressurization of enclosure

thick

thick

allow for linear adjustment

†

(including BNC connector) up to:

(14.00" L x 2.50" W x 2.50" H) or

35.56 x 7.62 cm (14.00" L x 3.00" diameter)

(18.00" L x 4.00" W x 4.00" H) or

45.72 x 12.7 cm (18.00" L x 5.00" diameter)

stainless steel bands

be filled with dry nitrogen

GENERAL

Construction Aluminum 6061 T6
Finish Gray polyester powder coat
Weight Unit Shipping

EH8104 Series 3.62 kg (8 lb) 4.98 kg (11 lb)
EH8106 Series 6.79 kg (15 lb) 8.15 kg (18 lb)

ENVIRONMENTAL

Ambient Operating
Temperature -40° to 50°C (-40° to 122°F) with heater(s)
Vibration 5 to 60 Hz with 0.082-inch total travel (15 g at

60 Hz). From 60 to 1,000 Hz, 5 g RMS with

random vibration
Altitude Sea level to equivalent of 3,048 m (10,000 ft)
Acoustic Noise Operates in 150 dB acoustic noise

environments
Humidity Up to 100% relative humidity; standard

Schrader and pressure relief valves provide

positive internal pressure with dry nitrogen

CERTIFICATIONS/RATINGS

•CE

• UL /cUL Listed

• Meets NEMA Type 6 and IP67 standards

OPTIONAL ACCESSORIES

Sun Shroud

Other

SS8004 Sun shroud for EH8104 Series enclosure
SS8006 Sun shroud for EH8106 Series enclosure
EH8000RKIT Dry nitrogen recharging kit (nonrefillable)
PSKIT8100 Pressure sensor kit; provides a contact closure

that can be wired to trigger an alarm when

internal pressure drops to 2 psi

RECOMMENDED MOUNTS

EH8104 Series

EM1109, EM2000, EM2200 Medium duty mount for horizontal/vertical

pipe or pole; maximum load is 18.1 kg (40 lb)
EM22 Medium duty wall mount; maximum load is

18.1 kg (40 lb)

MM22 Medium duty ceiling/pedestal mount;

maximum load is 18.1 kg (40 lb)

EH8106 Series

PM2000, PM2010

WM2000

‡

‡

Pedestal/ceiling mount; maximum load is

56.62 kg (125 lb)

Wall mount; maximum load is 34 kg (75 lb);

increased to 68 kg (150 lb) when used with

ST1 strut
WM3026 Heavy duty wall mount with adjustable head;

maximum load is 136 kg (300 lb)

Adapters

AH2000 Adjustable head
STI Support strut

RECOMMENDED PAN/TILTS

PT570 Series Medium duty pan/tilt; maximum load is

*For applications requiring an integrated positioning system, refer to our

Pressurized Legacy Series.

†

Assumes lens is fully extended.

‡

Use with AH2000 adjustable head.

18.14 kg (40 lb)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada
International
www.pelco.com

Tel [phone] Fax [phone]

Tel [phone] Fax [phone]

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.

©Copyright 2011, Pelco, Inc. All rights reserved.