• Bottom-Opening Wall Mount Houses Integral Receiver
• Receiver Offers Adjustable Lens Voltages, Selectable Camera
Worm Gear Drives
Voltages NTSC or PAL Video, Transient Suppression Circuit
Protection, and Auto/Random Scan as Standard Features
®
Series Integrated Positioning System
®
Quick-Connect Feature
®
COMPATIBLE
camera solutions
®
The Legacy
components designed to simplify installation and system design.
System components include an enclosure, pan/tilt, receiver, and wall
mount.
The mechanical and electrical components of the
feature RediLINK
effortless. It’s so easy, the basic system can be assembled in a matter
of minutes.
Select the
system. Then, select an appropriate receiver and mount to complete
the system package. Models are available with optional heater,
defroster, blower, thermal insulation, and sun shroud.
The
Legacy Series
52 pounds (23.6 kilograms) and features gold-plated electrical pin
connectors to ensure reliable contact and smooth operation. The
pan/tilt also features a Delrin
lubrication, is corrosion resistant, and ensures long life. Limit stops
are internally adjustable. Available in fixed or variable speed models,
options for the pan/tilt include preset positioning, heater blanket,
and 360-degree pan positioning. The pan/tilt is prewired for internal
feedthrough for all enclosure and camera functions.
Series is an innovative system of “building block”
®
quick-connectors making assembly fast and
Legacy
model pan/tilt and enclosure to create the basic
pan/tilt is capable of handling loads up to
®
worm gear that requires no
Legacy Series
The
Legacy
enclosure features a rear-opening, front-hinged lid with
gas strut, adjustable camera sled, tilt table, blower, and heater.
Enclosure options include defroster, thermal insulation, and sun
shroud.
The receivers in the
power connection with on/off switch that supplies power to the
entire system. Choose from fixed or variable speed models, with or
without presets, for 120/24/230 VAC applications. All models are
compatible with Coaxitron
control systems utilizing Pelco D or Pelco P protocols.
The
Legacy
wall mount is constructed from aluminum and meets
NEMA Type 4 standards. The mount opens from the bottom for easy
access and installation of the
can also be used for pole, corner, and parapet applications when
used with the appropriate adapter.
An optional infrared illuminator is available for nighttime viewing.
Pan rotation of the pan/tilt, however, will be limited by the amount
of slack in the power cord for the illuminator.
Legacy Series
®
control systems and Pelco RS-422
have a simple three-wire
Legacy Series
receiver. The mount
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C342 / REVISED 3-24-11
TECHNICAL SPECIFICATIONS
Pan/Tilt
MECHANICAL
Pan RotationMovement in horizontal plane
SL Models Only0 to 360°
All Others0 to 355°
Pan Speed
VS Models Only1 to 17°/sec ±1° (maximum load condition)
All Others9°/sec ±1°
Tilt Rotation90° down from horizontal; 60° up from
Tilt Speed
VS Models Only1 to 4°/sec ±0.5° (maximum load condition)
All Others3°/sec ±0.5°
Torque Output
VS Models Only18.3 ft-lb (24.8 N
All Others23.8 ft-lb (32.3 N
Maximum Load
VS Models Only40 lb (18.14 kg) at specified torque
All Others52 lb (23.55 kg) at specified torque
Pan/Tilt Drive SystemDelrin
Pan/Tilt BearingsRoller thrust bearings and bronze Oilite
Lubricants
BearingsNLGI #2; lithium complex grease fortified with
ChainTeflon chain lubricant, such as Tri-Flow
BrakingFriction
horizontal
m) at rated voltage and
-
75°F (23°C)
m) at rated voltage and
-
75°F (23°C)
®
worm gear; ground and polished
stainless steel worm
bushings
molybdenum
Cable Distances
PT780P Series
20 AWG (0.5 mm
18 AWG (1.0 mm
16 AWG (1.5 mm
PT780-24P Series
20 AWG (0.5 mm
18 AWG (1.0 mm
16 AWG (1.5 mm
PT780-VS Series
20 AWG (0.5 mm
18 AWG (1.0 mm
16 AWG (1.5 mm
†
2
6 Conductors
)1,370 ft (417 m)2,745 ft (836 m)
2
)2,180 ft (664 m)4,370 ft (1,331 m)
2
)3,470 ft (1,057 m)6,940 ft (2,115 m)
2
)59 ft (17.98 m)118 ft (35.96 m)
2
)94 ft (28.65 m)188 ft (57.30 m)
2
)149 ft (45.41 m)298 ft (90.83 m)
7 Conductors
‡
5 Conductors
2
)24 ft (7.3 m)
2
)38 ft (11.58 m)
2
)60 ft (18.28 m)
GENERAL
Construction
Pan/TiltAluminum exterior; painted steel and
aluminum interior parts
Worm GearDelrin, premium performance acetal
WormGround and polished stainless steel
EnvironmentIndoor/outdoor
Ambient Temperature–10°F to 140°F (–23°C to 60°C)
Weight21.5 lb (9.7 kg) approximate
Shipping Weight25.0 lb (11.3 kg) approximate
CERTIFICATIONS/RATINGS (Pan/Tilt Only)
®
• CE, Class B
• Meets NEMA Type 3R and IP54 standards
ELECTRICAL
Input Voltage120 VAC or 24 VAC, 50/60 Hz
12 VDC (VS models)
VA Required(At specified input voltage)
120 VAC24 VAC12 VDC
Pan19.2 VA21.6 VA17.04 VA
(0.16 A)(0.9 A)(1.42 A)
Tilt32.4 VA24 VA12.48 VA
(0.27 A)(1 A)(1.04 A)
Total51.6 VA45.6 VA29.52 VA
(0.43 A)(1.9 A)(2.46 A)
Maximum Current2 A per conductor (SL models only)
ConnectorsAmp CPC type, mate supplied (37 pins)
Motor Type
VS Models Only12 VDC continuous duty; DC permanent
Standard Model20 unshielded, plus video and camera sync
coaxial*
Standard with /PP27 unshielded, plus video and camera sync
coaxial*
Standard with /SL14 unshielded, plus video and camera sync
coaxial*
Standard with SL/PP20 unshielded, plus video and camera sync
coaxial*
Note: Two additional conductors may be required with /HB option.
11.10
(28.19)
0.70 (1.78)
8.50 (21.59)
9.60 (24.38)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
Ø 4.00 (10.16)
Ø 3.50 (8.89)
1/4-20 D&T X 0.50
USABLE THREAD DEPTH
EQUALLY SPACED
ON A 2.25 (5.71) BC
LEGACY PT780 SERIES PAN/TILT
*Including safety ground
†
Cable distances are based on:
•26.4 V AC output voltage from controller (24 VAC models) or 132 V AC
output voltage from controller (120 VAC models) or 12 VDC output voltage
from controller (12 VDC models), and
•10% cable loss with both motors (pan/tilt) running simultaneously.
‡
Using 2-wire motor common
TECHNICAL SPECIFICATIONS
Enclosure
MECHANICAL
Camera MountingRemovable camera sled. Can be inverted to
accommodate various cameras and lenses.
LatchesLink-lock No. 3, stainless steel. EH4700L
Series (1); EH5723L Series (2). Latches can be
secured with padlock of suitable size (not
supplied).
ELECTRICAL
Input Voltage24, 120, or 230 VAC, 50/60Hz
Electrical
ConnectionConnectors for input power, camera, lens and
accessories;
BNC for video;
BNC for camera synchronization;
26-pin RediLINK D-type connector (links
enclosure to pan/tilt)
Power ConsumptionEH4700LEH5723L
Heater (-1 models)60 W90 W
Heater (-2 models)50 W50 W
Heater (-3 models)55 W70 W
Defroster15 W30 W
Blower (-1 models)8 W15 W
Blower (-2 models)8 W10 W
Blower (-3 models)8 W15 W
Heater/defroster activates on at 42° to 58°F
(6° to 14°C) and off at 72 to 88°F (22° to
31°C); blower activates on at 77° to 93°F (25°
to 34°C) and off at 62° to 78°F (17° to 26°C)
GENERAL
Maximum Camera
and Lens SizeAccepts camera and lens combinations*
(including BNC connector) up to:
EH4718L-1/-2/-313.00" L x 4.75" W x 4.25" H
(33.02 x 12.07 x 10.80 cm)
EH4722L-2 17.00" L x 4.75" W x 4.25" H
(43.18 x 12.07 x 10.80 cm)
EH5723L-1/-2-315.50" L x 6.25" W x 5.50" H
(39.37 x 15.88 x 13.97 cm)
Viewing WindowGlass, 0.25-inch (6.35 mm) thick
Viewing Window Area
EH4700L Series3.50" H x 4.00" W (8.89 x 10.16 cm)
EH5723L4.25" H x 5.25" W (10.79 x 13.34 cm)
ConstructionDie-cast, extruded, and sheet aluminum
FinishGray polyester powder coat
EnvironmentIndoor/outdoor (–10° to 120°F)
WeightUnit Shipping
EH4718L-1/-2/-38.50 lb (3.8 kg) 12.00 lb (5.4 kg)
EH4722L-29.75 lb (4.4 kg)13.00 lb (5.9 kg)
EH5723L-1,-2,-314.00 lb (6.4 kg)16.00 lb (7.3 kg)
*Assumes lens is fully extended.
LEGACY® SERIES ENCLOSURE
A
C
B
EH4718L EH4722L EH5723L
A 21.20 (53.84) 25.20 (64.00) 26.50 (67.31)
B 18.30 (46.48) 22.30 (56.64) 23.00 (58.42)
C 2.25 (5.72) 2.25 (5.72) 3.06 (9.15)
D 3.50 (8.89) 3.50 (8.89) 4.25 (10.79)
E 6.70 (17.02) 6.70 (17.02) 8.09 (20.54)
F 4.00 (10.16) 4.00 (10.16) 5.25 (13.34)
G 7.25 (18.42) 7.25 (18.42) 8.98 (22.80)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
E
D
F
G
CERTIFICATIONS/RATINGS (Enclosure Only)
• CE, Class B (EH4718L-2, EH4718L-3, EH4722L-2, EH5723L-2 and
EH5723L-3)
• C-Tick
• Meets NEMA Type 3R and IP54 standards
MODEL NUMBERS
MODELS
ENCLOSURES
EH4718L-1Legacy environmental enclosure, 18-inch
(45.72 cm) lower body length, 120 VAC heater
and blower
EH4718L-2Same as EH4718L-1 except supplied with
24 VAC heater and blower
EH4718L-3Same as EH4718L-1 except supplied with
230 VAC heater and blower
EH4722L-2Legacy environmental enclosure, 22-inch
(55.88 cm) lower body length, 24 VAC heater
and blower
EH5723L-1Legacy environmental enclosure, 23-inch
(58.42 cm) lower body length, 120 VAC heater
and blower
EH5723L-2Same as EH5723L-1 except 24 VAC heater
and blower
EH5723L-3Same as EH5723L-1 except 230 VAC heater
and blower
PAN/TILTS
PT780P/PPMedium duty, indoor/outdoor pan/tilt with
RediLINK connector and preset positioning
option, 120 VAC
PT780-VSSL/PPSame as PT780-VSSL except with preset
positioning option
PT780-24PMedium duty, indoor/outdoor pan/tilt with
RediLINK connector, 24 VAC
PT780-24P/PPSame as PT780-24P except with preset
positioning option
PT780-24SLSame as PT780-24P except unit is capable of
360° pan rotation
PT780-24SL/PPSame as PT780-24SL except with preset
positioning option
Note: Legacy systems (enclosure, pan/tilt, receiver, mount, camera and lens)
are available. Consult the factory for available configurations.
OPTIONAL ACCESSORIES
ENCLOSURE
O/I-LPPPreset position lens wiring harness
O/I-OUTLET120 VAC electrical outlet
SS4718Sun shroud for EH4718L Series
SS4722Sun shroud for EH4722L Series
SS5723Sun shroud for EH5723L Series
TI47Thermal insulation for EH4700L Series
TI57Thermal insulation for EH5723L Series
WD47-1Window defroster for EH4700L Series,
120 VAC, 15 W
WD47-2Window defroster for EH4700L Series,
24 VAC, 15 W
WD47-3Window defroster for EH4700L Series,
230 VAC, 15 W
WD57-1Window defroster for EH5723L Series,
120 VAC, 30 W
WD57-2Window defroster for EH5723L Series,
24 VAC, 30 W
WD57-3Window defroster for EH5723L Series,
230 VAC, 30 W
PAN/TILT
HB1*Heater blanket, 120 VAC, 40 W (0.33 A)
Allows operation to –50°F (–45°C)
Thermostatically controlled; activates on at
40°F (4°C) and off at 60°F (15°C)
HB2*Same as HB1 except 24 VAC, 40 W (1.7 A)
HB3*Same as HB1 except 230 VAC, 40 W (0.17 A)
120/24/230 VAC
LRD41C-CONNKITConnector kit for LRD41C21/LRD41C22 Series
receiver; required to enable the Aux/Alarm
capabilities of the receiver
LRD41TLCReceiver plug-in testing module
RECOMMENDED MOUNTS
LWM41Wall mount; use with/without optional
integral Legacy receiver
PM2000, PM2010Ceiling/pedestal mount
CM400Corner adapter for LWM41 wall mount
PA2000Pan/tilt adapter for PM2000/PM2010 mounts
PA402Pole adapter for LWM41 wall mount
PP400Parapet adapter (wall) for LWM41 wall mount
PP4348Parapet adapter (rooftop) for LWM41 wall
mount
MISCELLANEOUS ACCESSORIES
LL27 SeriesInfrared illuminator (power cord restricts pan
rotation of pan/tilt)
LL27LMMounting bracket for LL27 Series illuminator
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.