Pelco EH4712DB, EH4712DB-2, EH4718DB, EH4718DB-2 Specsheet

PRODUCT SPECIFICATION

EH4718DB ENCLOSURE

2.00

(5.08)

1/4-20

B

A

C

5.00

(12.70)

6.87

(17.45)

NOTE: EH4712DB SERIES DOES NOT HAVE VENTS IN BOTTOM

OF ENCLOSURE.

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

EH4712DB EH4718DB
A 7.25 (18.42) 9.25 (23.50)
B 16.2 (41.15) 21.2 (53.84)
C 13.3 (33.78) 18.3 (46.48)

EH4700DB Series Enclosure

OUTDOOR, SMALL/MEDIUM, TOP MOUNTING, “DROP” BOTTOM

camera solutions

Product Features

• Indoor/Outdoor Applications

• All-Aluminum Construction

• Bottom-Opening Access Door

• Factory/Field-Installed Accessories

• Cable Entry Glands and Mounting Holes Located on Top of Enclosure

• Suitable for Mounting in Parking Garages and Under Building Eaves

or Installations Where Wall Mounting Is Not Practical

The EH4700DB Series are indoor/outdoor enclosures constructed
from die cast and extruded aluminum. They are available in 13-inch
(33.02 cm) (EH4712DB) or 18-inch (45.72 cm) (EH4718DB) lengths.

Both enclosures will accept cameras with either fixed focal length
lenses or motorized zoom lenses. Models with factory-installed heater
and blower feature a prewired PC board with internal electronics to
simplify installation and setup of camera and enclosure accessories.

Unlike other enclosures, the EH4700DB Series opens from the
bottom and the camera sled is attached to the top of the enclosure.
Internal adjustments can be made without interfering with the video
because the camera remains in its normal viewing position.

Cable entry glands and mounting holes are located on the top of the
enclosure, making it ideal for ceiling applications, especially where
limited accessibility is a concern.

The EH4700DB Series is available with factory-installed heaters
and blowers. Optional field-installed accessories include a window
defroster, preset positioning lens wiring harness, 120 VAC electrical
outlet, and lock kit.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1446 / REVISED 2-15-16

TECHNICAL SPECIFICATIONS

Pelco and the Pelco logo are registered t rademarks of Pelco, Inc.

Lexan is a registered trademark of the General Electric Company.

Product specifications and availability subject to change without notice.

©Copyright 2016, Pelco, Inc. All rights reserved.

MODELS

Model Number

EH4712DB •

EH4712DB-1 • • • 68W

EH4712DB-2 • • • 58W

EH4712DB-3 • • • 63W

EH4718DB •

EH4718DB-1 • • • 68W

EH4718DB-2 • • • 58W

EH4718DB-3 • • • 63W

*If optional defroster is used, add 15W to consumption.

Basic Enclosure

120 VAC

24 VAC

230 VAC

Heater

Defroster

Blower

Max. Power

MECHANICAL

Cable Entry Two PG13.5 UL compression glands on lid;

Cable Entry Holes 0.875-inch (2.22 cm) diameter; will accept

Camera Mounting Removable camera sled
Access Door Latch 1/4-turn latch with molded vinyl cap

maximum cable diameter 0.47 inch (1.19 cm)

0.5-inch (1.27 cm) conduit fitting when gland
is removed

ELECTRICAL

Input voltage 24 VAC, 120 VAC, or 230 VAC, 50/60 Hz
Electrical connectio n Connectors for power input, lens, camera, and

Power consumption
Heater 60 watts 50 watts 55 watts
Defroster 15 watts 15 watts 15 watts
Blower 8 watts 8 watts 8 watts

accessories (-1/-2/-3 models only)
120 VAC 24 VAC 230 VAC

GENERAL

Maximum
Camera and Lens Size* (including BNC connector)

EH4712DB 12.5" L x 3.5" W x 4.0" H

EH4712DB-1/-2/-3 8.5" L x 3.5" W x 4.0" H

EH4718DB 16.5" L x 3.5" W x 4.0" H

EH4718DB-1/-2/-3 12.5" L x 3.5" W x 4.0" H

Viewing Window 0.25-inch (6.35 mm) thick Lexan
Viewing Window Area 3.50" H x 4.00" W

Construction Die-cast, extruded, and sheet aluminum
Environment Indoor/outdoor

Weight

EH4712DB 6.35 lb (2.90 kg) 7 lb (3.17 kg)
EH4712DB-1/-2/-3 7.85 lb (3.56 kg) 9 lb (4.08 kg)
EH4718DB 7.25 lb (3.28 kg) 9 lb (4.08 kg)
EH4718DB-1/-2/-3 8.75 lb (3.96 kg) 10 lb (4.53 kg)

*Assumes lens is fully extended.

(31.75 x 8.89 x 10.16 cm)

(21.59 x 8.89 x 10.16 cm)

(41.91 x 8.89 x 10.16 cm)

(31.75 x 8.89 x 10.16 cm)

(8.89 x 10.16 cm)

-10° to 120°F (-23° to 49°C)
Unit Shipping

®

Consumption*

OPTIONAL ACCESSORIES

Window WD47-1* Window defroster and defogger
Defroster prevents ice buildup or condensation

of moisture on window caused by
temperature and humidity, 120þVAC,
15W

WD47-2* Same as WD47-1 except 24 VAC

operation

WD47-3* Same as WD47-1 except 230 VAC

operation

Other LK4500 Lock kit

O/I-LPP Preset positioning lens wiring harness

(for use with -1/-2/-3 models only)

O/I-OUTLET 120 VAC electrical outlet (for use with

-1/-2/-3 models only)

*Window defroster not for use with basic enclosure (EH4712DB or

EH4718DB).

RECOMMENDED MOUNTS

Ceiling EM1009U, Medium duty ceiling mount;

EM1015U maximum load 40 lb (18.14 kg)

Wall EM1900U Medium duty wall mount;

maximum load 40 lb (18.14 kg)

Pipe/Pole EM1109 Medium duty ceiling/pedestal mount

for horizontal pipe or pole applications;
maximum load 40 lb (18.14þkg)

EM2000 Medium duty mount for vertical pipe or

pole applications; maximum load 40 lb
(18.14þkg)
(Mount orientation is reversed when
used with EH4718DB Series)

RECOMMENDED PAN/TILT

(Inverted Operation Only)

PT570-24P Series Medium duty indoor/outdoor pan/tilt,

24 VAC; maximum load 40 lb (18.14 kg)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community