Pelco EH4718-1, EH4722, EH4718, EH4718-2, EH4722-1 Specsheet

PRODUCT SPECIFICATION

EH4700 Series Enclosure

OUTDOOR, MEDIUM

camera solutions

Product Features

• Designed for Indoor/Outdoor Applications

• For Use with Fixed Mount or Pan/Tilt

• Die-Cast and Extruded Aluminum Construction

• Gas-Spring-Assisted, Forward-Opening Lid

• Cable Entry Glands and Mounting Holes Located on Bottom of

Enclosure

• Special Options Include 120 VAC Outlet and Preset Lens Wiring

Harness

The

EH4700 Series

are indoor/outdoor enclosures constructed from
die-cast and extruded aluminum. Available in an 18-inch (45.72 cm)
length (

EH4718

) and 22-inch (55.88 cm) length (

EH4722

), these
enclosures are designed to accept larger format cameras with either
fixed focal length lenses or motorized zoom lenses. The camera sled
is removable and can be inverted to accommodate various camera and
lens combinations.

The enclosure opens from the rear by unlatching the rear-mount,
link-lock latch. The forward-opening lid allows for maximum
accessibility during installation/servicing and can be removed, if
necessary. A unique gas spring securely holds the lid when fully
opened. If desired, the link-lock latch can be secured with a padlock
of suitable size for additional security.

6.87

(17.45)

5.00

(12.70)

2.25

(5.72)

EH4718

ENCLOSURE WITH SUN SHROUD

C

A

B

2.00

(5.08)

1/4-20, 3X

The

EH4700 Series

is available with a full complement of factory­and field-installed accessories which include blower, heater, window
defroster, sun shroud, thermal insulation, 120 VAC electrical outlet,
and preset position lens wiring harness.

The

EH4700 Series

can be used in fixed mount applications or

mounted to a medium duty pan/tilt, such as our PT570 Series.

DIM. MODEL

21.2 (53.84) EH4718
A

25.2 (64.00) EH4722

18.3 (46.48) EH4718
B

22.3 (56.64) EH4722

7.00 (17.78) EH4718
C

9.00 (22.86) EH4722

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1405 / REVISED 1-27-11

TECHNICAL SPECIFICATIONS

MODELS

Model Number

EH4718

EH4718-1

EH4718-2

EH4718-3

EH4722

EH4722-1

EH4722-2

EH4722-3

Note:

If the optional defroster is used, add 15 W to the maximum power

consumption.

Basic Enclosure

120 VAC

24 VAC

230 VAC

Heater

Defroster

Blower

•

•••

•••

•• •

•

•••

•••

•• •

Max. Power

Consumption

68 W

58 W

63 W

68 W

58 W

63 W

MECHANICAL

Cable Entry Two PG13.5 compression glands on bottom;

Cable Entry Holes 0.875-inch (2.22 cm) diameter; will accept

Camera Mounting Removable camera sled; can be inverted
Rear Latch Link-lock, No. 3, stainless steel; can be

0.47-inch (1.19 cm) maximum cable diameter

0.5-inch (1.27 cm) conduit fitting when
compression gland is removed

secured with padlock (not supplied)

ELECTRICAL

Input Voltage 24 VAC, 120 VAC or 230 VAC, 50/60Hz.
Electrical Connection Connectors for power input, lens, camera, and

accessories (-1/-2/-3 models only).

(-1/-2/-3 models only)

Heater/defroster activates on at 42° to 58°F
(6° to 14°C) and off at 72° to 88°F (22° to
31°C). Blower activates on at 77° to 93°F (25°
to 34°C) and off at 62° to 78°F (17° to 26°C).

GENERAL

Maximum Camera Accepts camera and lens combinations*
and Lens Size (including BNC connector) up to:

EH4718 17.00" L x 5.50" W x 4.25" H

EH4718-1/-2/-3 13.00" L x 4.75" W x 4.25" H

EH4722 21.00" L x 5.50" W x 4.25" H

EH4722-1/-2/-3 17.00" L x 4.75" W x 4.25" H

Viewing Window 0.25-inch (6.35 mm) thick Lexan
Viewing Window Area 3.50" H x 4.00" W (8.89 x 10.16 cm)
Construction Die-cast, extruded, and sheet aluminum
Finish Gray polyester powder coat
Environment Indoor/outdoor;

Weight Unit Shipping

EH4718 7.25 lb (3.28 kg) 9 lb (4.07 kg)
EH4718-1/-2/-3 8.50 lb (3.85 kg) 10 lb (4.53 kg)
EH4722 8.50 lb (3.85 kg) 10 lb (4.53 kg)
EH4722-1/-2/-3 9.75 lb (4.42 kg) 12 lb (5.44 kg)

(43.18 x 13.97 x 10.795 cm)

(33.02 x 12.07 x 10.795 cm)

(53.34 x 13.97 x 10.795 cm)

(43.18 x 12.07 x 10.795 cm)

–10° to 120°F (–23° to 49°C)

®

CERTIFICATIONS/RATINGS

• CE (EH4718-3 and EH4722-3)

• UL Listed (except 230 VAC models)

• C-Tick

• Meets NEMA Type 3R standards

OPTIONAL ACCESSORIES

†

Blower Kit

Heater Kit

Defroster

Sun Shroud

BK47-1
BK47-2
BK47-3
HK47-1
HK47-2
HK47-3
WD47-1
WD47-2
WD47-3
SS4718 Sun shroud for EH4718 Series

120 VAC, 8 W

†

24 VAC, 8 W

†

230 VAC, 8 W

†

120 VAC, 60 W

†

24 VAC, 50 W

†

230 VAC, 55 W

†

Window defroster, 120 VAC, 15 W

†

Window defroster, 24 VAC, 15 W

†

Window defroster, 230 VAC, 15 W

enclosures

SS4722 Sun shroud for EH4722 Series

enclosures

Other

O/I-PCB Accessory interface board;

thermostatically controls heater,
blower, and defroster operation (one

O/I-LPP

Preset position lens wiring harness

per enclosure required)

†

O/I-OUTLET†120 VAC electrical convenience outlet
TI47 Thermal insulation

RECOMMENDED MOUNTS

Pedestal

Wall

Pipe/Pole

Adapter

AH1000 Manually adjustable pan/tilt head

EM1009U, Medium duty pedestal mount;
EM1015U maximum load 40 lb (18.14 kg)

MM22 Medium duty pedestal mount;

maximum load 40 lb (18.14 kg)

PM2000/ Pedestal mounts; maximum load

‡

125 lb (56.63 kg)

PM2010
EM1900U Medium duty wall mount; maximum

load 40 lb (18.14 kg)

EM22 Medium duty wall mount; maximum

load 40 lb (18.14 kg)

‡

WM2000

Universal wall mount; maximum load
75 lb (33.97 kg)

EM1109 Medium duty pedestal mount for pipe/

pole; maximum load 40 lb (18.14 kg)

EM2000, Medium duty mount for pipe/pole
EM2200 applications; maximum load

40 lb (18.14 kg)

RECOMMENDED PAN/TILT

PT570 Series Medium duty pan/tilt, 120 or 24 VAC; maximum load

*Assumes lens is fully extended.

†

These accessories are factory wired with a plug-in connector for use with
the O/I-PCB. The O/I-PCB is included with all -1/-2/-3 models. You must
order one O/I-PCB if you are using a basic enclosure (EH4718 or EH4722)
with these optional accessories.

‡

Use with AH1000 adjustable head.

40 lb (18.14 kg)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada
International
www.pelco.com

Tel [phone] Fax [phone]

Tel [phone] Fax [phone]

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.

©Copyright 2011, Pelco, Inc. All rights reserved.