PRODUCT SPECIFICATION
EH4010/EH4014 Enclosure
INDOOR, MEDIUM
Product Features
• Low Cost
• Indoor Applications
• Contemporary Design
• Medium Sizes
• For Use with Fixed Mount or Pan/Tilt
• Easy Access for Service and Installation
• For Use with Medium-to-Large Format Cameras
• Upright or Inverted Applications
camera solutions
EH4014
The
EH4000 Series
are low cost camera enclosures designed
especially for indoor applications.
The enclosure features a removable rear cap for easy access to camera
sled. Adjustable glands on the rear cap allow for easy installation of
the power and video cables, and a removable front cap allows the
installer to manually adjust the lens without removing the camera.
The
EH4010
can be used with medium format cameras and the
EH4014
can be used with medium-to-large format cameras. The
EH4014
will accommodate fixed focal length lenses or motorized
zoom lenses (with or without auto iris).
These enclosures can be used in fixed mount applications or mounted
to a light duty pan/tilt, such as our PT270-24P or PT280-24P. They can
also be used with our PS20 Series scanner (when used indoors).
4.40
(11.18)
6.20
(15.75)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
EH4010/EH4014 DIMENSION DRAWING
15.75 (40.01) EH 4014
11.70 (29.72) EH 4010
2.00
(5.08)
1/4-20
C413 / REVISED 5-19-08
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
EH4010 Extruded aluminum enclosure, 11.70-inch
EH4014 Extruded aluminum enclosure, 15.75-inch
(29.71 cm) body length
(40.01 cm) body length
MECHANICAL
Camera Mounting
EH4010 Adjustable L-shaped bracket with one
EH4014 Multiple holes on removable camera sled
Maximum
Camera and Lens Size Accepts camera and lens combinations*
EH4010 3.50" H x 5.25" W x 8.00" L
EH4014 3.50" H x 5.25" W x 12.00" L
Viewing Window 0.125" (3.17 mm) thick Lexan
Viewing Window Area 2.50" H x 3.75" W
Cable Entry Two compression glands on rear cap;
*Assumes lens is fully extended.
mounting hole attached to the slide-out rail
(including BNC connector) up to:
(8.89 x 13.33 x 20.32 cm)
(8.89 x 13.33 x 30.48 cm)
®
(6.35 x 9.52 cm)
maximum 5/16" (0.79 cm) cable diameter
GENERAL
Construction Extruded aluminum body; injection molded
Finish Gray polyester powder coat
Environment Indoor only
Unit Weight
EH4010 3.68 lb (1.67 kg)
EH4014 4.98 lb (2.26 kg)
Shipping Weight
EH4010 5 lb (2.26 kg)
EH4014 6 lb (2.7 kg)
black ABS plastic end caps
RECOMMENDED MOUNTS
Ceiling/Pedestal
Wall
Pipe/Pole
EM1009U, Medium duty ceiling/pedestal mount;
EM1015U maximum load 40 lb (18.12 kg)
EM3000 Ceiling J-mount; maximum load 40 lb
(18.12 kg)
MM22 Medium duty ceiling/pedestal mount;
maximum load 40 lb (18.12 kg)
EM1900U Medium duty wall mount; maximum
load 40 lb (18.12 kg)
EM2400 Light duty wall mount; maximum load
20 lb (9.06 kg)
EM22 Medium duty wall mount; maximum
load 40 lb (18.12 kg)
EM1109 Medium duty pedestal mount for
vertical pipe or pole applications;
maximum load 40 lb (18.12 kg)
EM2000 Medium duty mount for vertical pipe or
pole applications; maximum load 40 lb
(18.12 kg)
EM2200 Medium duty mount for horizontal pipe
or pole applications; maximum load
40 lb (18.12 kg)
RECOMMENDED PAN/TILTS
PT270-24P Light duty pan/tilt, 24 VAC; maximum load 15 lb (6.8 kg)
PT280-24P Light duty pan/tilt, 24 VAC, with pre-wired cable;
PS20 Series Medium duty scanner, 24/120 VAC; maximum load
maximum load 15 lb (6.8 kg)
35 lb (15.7 kg)
CERTIFICATIONS
• CE, Class B
• UL Listed
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX (800) 289-9150
Tel: +1 (559) 292-1981 • FAX +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc..
Lexan is a registered trademark of the General Electric Company.
Product specifications and availability subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.