Pelco EH3515-MT, EH3512-2HD-FMT, EH3512-3-FMT, EH3512-1HD-MT, EH3512-1 Specsheet

...

PRODUCT SPECIFICATION

5.14

(13.05)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

2.00

(5.08)

3.88

(9.86)

EH3512 EH3515 A 14.75 (37.47) 17.75 (45.09) B 12.75 (32.38) 15.75 (40.00) C 11.25 (28.57) 14.25 (36.20)

EH3512/EH3515 Series Enclosure

OUTDOOR, SMALL

cameras

Product Features

• Low Cost

• Small, Contemporary Design

• Die-Cast and Extruded Aluminum Construction

• Forward-Opening Hinged Lid

• Rear Link-Lock Latch

• Cable Entry Glands and Mounting Holes on Bottom of Enclosure

• Designed for Indoor/Outdoor Applications

• Easy Access for Servicing and Installation

• Models Available with Factory-Installed Low Power Heater, Blower

and Defroster, or with Heater and Defroster

The

EH3512/EH3515 Series

are indoor/outdoor, low cost camera enclosures constructed from die cast and extruded aluminum. The

EH3512

has a lower body length of 12.75 inches (32.38 cm) and

the

EH3515

has a lower body length of 15.75 inches (40.00 cm).

These enclosures are for use with cameras having ﬁxed focal length lenses or motorized zoom lenses (with or without auto iris operation).

EH3512 ENCLOSURE WITH SUN SHROUD

AND EM3512 MOUNT

The front hinged lid provides easy access to the removable camera sled. Two adjustable (PG13.5) glands on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

Field-installed options include heater-defroster, blower, and sun shroud. The enclosures can also be factory-ordered with a low power 24V, 120V, or 230V heater-defroster and blower or heater-defroster only.

The

EH3512

and

EH3515

are ideal for small-to-medium cameras and can be mounted to either our PT270/PT280 Series (indoor) or PT570/PT680 Series (outdoor) pan/tilts, or any compatible mount.

An EH-MKIT marine kit is available for EM1512 and EM1450 wall mounts. The marine kit protects enclosures and wall mounts from galvanic corrosion.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C478 / REVISED 10-16-09

TECHNICAL SPECIFICATIONS

MODELS

Model Number

EH3512 •

EH3512-1 • • • • 25 W

EH3512-2 • • • • 20 W

EH3512-3 ••••43 W

EH3512-1HD • • • 25 W

EH3512-2HD • • • 20 W

EH3512-3HD • • • 43 W

EH3515 •

EH3515-1 • • • • 25 W

EH3515-2 • • • • 20 W

EH3515-3 ••••43 W

EH3515-1HD • • • 25 W

EH3515-2HD • • • 20 W

EH3515-3HD • • • 43 W

*Maximum power consumption does not include camera wattage.

Basic Enclosure

120 VAC

24 VAC

230 VAC

Heater

Defroster

Blower

Max. Power

MECHANICAL

Camera Mounting Multiple holes on adjustable camera sled;

Maximum Camera Size Accepts camera and lens combinations*

EH3512 10.25" (26.03 cm) EH3512-1/-2/-3 9.00" (22.86 cm) EH3512-1HD/-2HD/-3HD 10.00" (25.40 cm) EH3515 13.25" (33.66 cm) EH3515-1/-2/-3 12.00" (30.48 cm) EH3515-1HD/-2HD/-3HD 13.00" (33.02 cm)

Viewing Window 0.187-inch (4.76 mm) thick, Lexan Viewing Window Area

EH3512/EH3515 2.25" H x 2.63" W (5.71 x 6.68 cm) All Other Models 2-inch (5.08 cm) diameter circle

Cable Entry Two PG13.5 compression glands on bottom;

Cable Entry Holes 0.875-inch (2.22 cm) diameter; will accept

Latch Link-lock No. 3, stainless steel; can be

*Assumes lens is fully extended.

camera sled can be inverted for additional camera elevation

(including BNC connector) up to

3.12" W x 3.00" H (7.92 x 7.62 cm) and the following length:

0.47-inch (1.19 cm) maximum cable diameter

0.5-inch (1.27 cm) conduit ﬁtting when compression gland is removed

secured with padlock (not supplied)

GENERAL

Construction Extruded and die-cast aluminum Finish Gray polyester powder coat Environment Indoor/outdoor -10° to 120°F

(-23° to 49°C)

Consumption*

Unit Weight Basic Model

All Others

EH3512 3.49 lb (1.58 kg) 3.85 lb (1.75 kg) EH3515 4.10 lb (1.86 kg) 4.47 lb (2.03 kg)

Shipping Weight Basic Model All Others

EH3512 5 lb (2.26 kg) 5 lb (2.26 kg) EH3515 5 lb (2.36 kg) 6 lb (2.72 kg)

CERTIFICATIONS/RATINGS/PATENTS

• CE compliant

• UL /cUL Listed

• Meets NEMA Type 4 standards

• Meets IP66 standards

• U.S. Patent 307,915

OPTIONAL ACCESSORIES

Blower Kit

Heater-Defroster

Marine Kit Sun Shroud

†

Thermostatically controlled heater activates on at 50°F (10°C); off at 80°F (27°C). Defroster operates continuously.

BK3512-1 For EH3512/EH3515; continuous duty,

120 VAC, 4 W, 10 cfm at 60 Hz

BK3512-2 For EH3512/EH3515; continuous duty,

24 VDC (AC rectiﬁed), 2 W, 19 cfm at 50/60 Hz

BK3512-3 For EH3512/EH3515; continuous duty,

230 VAC, 9 W, 8 cfm at 50 Hz

†

HD35-1 For EH3512 only; 120 VAC, 25 W HD35-2 Same as HD35-1 except 24 VAC, 20 W HD35-3 Same as HD35-1 except 230 VAC, 43 W HD3515-1 For EH3515 only; 120 VAC, 25 W HD3515-2 Same as HD3515-1 except 24 VAC, 20 W HD3515-3 Same as HD3515-1 except 230 VAC,

43 W EH-MKIT Requires EM1450 wall mount SS3512 For EH3512 Series enclosure

SS3515 For EH3515 Series enclosure

RECOMMENDED MOUNTS

Pedestal

Wall

Pipe/Pole

EM1009U, Medium duty pedestal mount; EM1015U maximum load 40 lb (18.14 kg)

MM22 Medium duty pedestal mount;

maximum load 40 lb (18.14 kg) EM1450 Light duty wall mount; maximum load

20 lb (9.07 kg) EM2400 Light duty wall mount; maximum load

20 lb (9.07 kg) EM3512 Wall mount with feedthrough for

EH3512, EH3512-2, and EH3512-2HD

enclosures only EM1900U Medium duty wall mount; maximum

load 40 lb (18.14 kg) EM22 Medium duty wall mount; maximum

load 40 lb (18.14 kg) EM1109, Medium duty mounts for pipe/pole

EM2000, applications; maximum load 40 lb EM2200 (18.14 kg). Fit poles with 3-inch

(7.62 cm) to 8-inch (20.32 cm)

diameters.

RECOMMENDED PAN AND TILTS

PT270-24P Light duty, indoor pan/tilt PT280-24P Light duty, indoor pan/tilt with prewired feedthrough PT570 Series Medium duty, indoor/outdoor pan/tilt PS20 Series Medium duty, indoor/outdoor scanner

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

All product names and services identiﬁed throughout this document are trademarks or registered

trademarks of their respective companies. The absence of a trademark or registered trademar

from this document does not constitute a waiver of intellectual property rights.

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.,

Product speciﬁcations and availability subject to change without notice.