Pelco EH3508-2, EH3508-1-MT, EH3508, EH3508-2-MT, EH3508-1 Specsheet

PRODUCT SPECIFICATION

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

EH3508 Series Enclosure

OUTDOOR, SMALL

camera solutions

Product Features

• Low Cost

• Small, Contemporary Design

• Forward-Opening Hinged Lid

• Rear Link-Lock Latch

• Die-Cast and Extruded Aluminum Construction

• Designed for Indoor/Outdoor Applications

• Easy Access for Servicing and Installation

• Cable Entry Glands and Mounting Holes on Bottom of Enclosure

• Factory-Installed Low Power Heater-Defroster Models Available

The

EH3508 Series

are indoor/outdoor, low cost camera enclosures

constructed from die-cast and extruded aluminum.

The

EH3508 Series

is the smallest of our outdoor enclosures and
can be used with cameras having fixed focal length or motorized
zoom lenses (with or without auto iris operation).

The enclosure features a front hinged lid, two adjustable (PG13.5)
cable glands on the bottom, and a rear link-lock latch that can be used
with a padlock of suitable size for applications requiring additional
security.

Field-installed options for the

EH3508

include heater-defroster and
sun shroud. Power consumption of heater and defroster is 43 watts
maximum.

These enclosures can also be factory ordered with a low power
24 VAC, 120 VAC, or 230 VAC heater-defroster for applications where
high humidity or low temperatures are prevalent. Factory-installed
heater is thermostatically controlled to activate ON at 10°C (50°F)
and OFF at 27°C (80°F); defroster operates in continuous duty mode.

13.05
(5.14)

9.86

(3.88)

EH3508

ENCLOSURE WITH SUN SHROUD

27.30 (10.75)

22.04 (8.68)

19.07 (7.51)

5.08

(2.00)

The

EH3508

is ideal for small cameras and fixed mount applications.
It can also be used with our PT270-24P or PT280-24P pan/tilt as well
as our PS20 Series scanner.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1435 / REVISED 11-15-11

TECHNICAL SPECIFICATIONS

MODELS

Model Number

EH3508

EH3508-1 • • • 25 W

EH3508-2 • • • 20 W

EH3508-3 • • • 43 W

Note:

Maximum power consumption does not include camera wattage.

Basic Enclosure

120 VAC

•

24 VAC

230 VAC

Heater

Defroster

Blower

Maximum Power

MECHANICAL

Camera Mounting Multiple holes on adjustable camera sled;

Cable Entry Two PG13.5 compression glands on bottom;

Cable Entry Holes 2.22 cm (0.875-inch) diameter; will accept

Latch Link-lock No. 3, stainless steel; can be

camera sled mounts in threaded strip for
easier removal and can be inverted for
additional camera elevation

maximum cable diameter 1.19 cm (0.47-inch)

1.27 cm (0.5-inch) conduit fitting when
compression gland is removed

secured with padlock (not supplied)

ELECTRICAL

Input Voltage

EH3508-1 120 VAC, 50/60 Hz
EH3508-2 24 VAC, 50/60 Hz
EH3508-3 230 VAC, 50/60 Hz

Connectors One 10-position terminal block for input

wiring

GENERAL

Maximum Camera
and Lens Size Accepts camera and lens combinations*

EH3508 17.27 cm (6.80")
EH3508-1/-2/-3 12.70 cm (5.00")

Viewing Window 4.75 mm (0.187-inch) thick Lexan
Viewing Window Area

EH3508 5.71 x 6.68 cm (2.25" H x 2.63" W)
EH3508-1/-2/-3 5.08 cm (2-inch) diameter circle

Construction Extruded and die-cast aluminum
Finish Gray polyester powder coat
Environment Indoor/outdoor –23° to 49°C (–10° to 120°F)
Weight Unit Shipping

EH3508 1.20 kg (2.67 lb) 1.81 kg (4 lb)
EH3508-1/-2/-3 1.25 kg (2.76 lb) 1.81 kg (4 lb)

(including BNC connector) up to:

7.28 x 7.62 cm (2.87" W x 3.00" H) and the
following length:

®

Consumption

CERTIFICATIONS/RATINGS/PATENTS

• CE compliant

• UL/cUL Listed

• Meets NEMA Type 4 standards and IP66 standards

• U.S. Patent 307,915

OPTIONAL ACCESSORIES

HD35-1 Heater and defroster kit, 120 VAC, 25 W;

HD35-2 Same as HD35-1 except 24 VAC, 20 W
HD35-3 Same as HD35-1 except 230 VAC, 43 W
SS3508 Sun shroud; reduces internal temperature by

thermostatically controlled heater activates
on at 10°C (50°F); off at 27°C (80°F); defroster
operates continuously

approximately 6° to 10°C (10° to 15°F)

RECOMMENDED MOUNTS

Pedestal

Wall

Pipe/Pole

EM1009U, Medium duty pedestal mount;
EM1015U maximum load 18.14 kg (40 lb)

EM1450 Light duty wall mount; maximum load

9.07 kg (20 lb)

†

EM2400

Light duty wall mount; maximum load

9.07 kg (20 lb)

EM1900U Medium duty wall mount; maximum load

18.14 kg (40 lb)

EM1109, Medium duty mounts for pipe/pole
EM2000, applications; maximum load 18.14 kg (40 lb);
EM2200 fit poles with 7.62 cm (3-inch) to

20.32 cm (8-inch) diameters

RECOMMENDED PAN AND TILTS

PT270-24P Light duty, indoor pan/tilt
PT280-24P Light duty, indoor pan/tilt with prewired

PS20 Series Medium duty, indoor/outdoor scanner

*Assumes lens is fully extended.

†

For indoor use only.

feedthrough

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada
International
www.pelco.com

Tel [phone] Fax [phone]

Tel [phone] Fax [phone]

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.

©Copyright 2011, Pelco, Inc. All rights reserved.