Pelco EH2400 Specsheet

PRODUCT SPECIFICATION

EH2400 Enclosure

INDOOR, SECURITY RATED, CORNER MOUNT

camera solutions

Product Features

• Aluminum Construction

• Tamper Resistant

• Adjustable Camera Mount

• Flush Ceiling or Mid-Wall Mounting

• Ideal for Today’s Smallest Box Cameras

• Attractive, Rugged Powder Coat Finish

The

EH2400

enclosure is designed to provide low cost, tamper­resistant, corner mounting for fixed camera applications. It can be
mounted flush against a ceiling, or placed mid-wall in high ceiling
applications, without compromising enclosure integrity.

The smaller frontal area and reduced overall size create an
unobtrusive enclosure ideal for today’s smaller cameras. The

EH2400

will accommodate Pelco cameras with vari-focal lenses that do not
exceed eight inches in total length.

The

EH2400

is constructed from aluminum and has a 3/16-inch thick

®

Lexan

window. Tamper-resistant button-head screws prevent the

enclosure from being opened by unauthorized personnel.

Three conduit knockouts allow wires to be delivered from the wall
(either side) or ceiling.

13.00 (33.02)

4.00

(10.16)

3.75

(9.53)

(3.81)

6.50

(16.51)

1.50

C1468 / REVISED 1-07

10.25 (26.04)

8.63

(21.92)

4.25

(10.80)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODEL

EH2400 Indoor enclosure; security rated, corner

MECHANICAL

Camera Mounting Adjustable tilt table
Maximum Camera

and Lens Size Accepts camera and lens combinations*

Viewing Window 0.187-inch (4.76 mm) thick Lexan
Viewing Window Area 4.25" W x 2.56" H (10.8 x 6.50 cm)
Cable Entry 0.875-inch (2.22 cm) diameter or 1.125-inch

Enclosure Mounting Eight 0.25-inch (0.64 cm) diameter openings

Security Tamper-resistant button-head screws (hollow

*Assumes lens is fully extended.

GENERAL

Construction 0.125-inch (3.175 mm) thick aluminum
Finish Gray polyester powder coat
Environment Indoor
Unit Weight 6.57 lb (2.98 kg)
Shipping Weight 9 lb (4.08 kg)

mount, aluminum

(including BNC connector) up to

4.0" H x 4.0" W x 8.0" L
(10.16 x 10.16 x 20.32 cm)

®

(2.86 cm) diameter knockout access through
rear walls and top

on protected rear surfaces

Allen wrench supplied)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.

Lexan is a registered trademark of the General Electric Company.

Product specifications and availability subject to change without notice.

©Copyright 2007, Pelco, Inc. All rights reserved.