C407SM (10/99)
EH2100/EH2100P
Ceiling Enclosures
®
300 W. Pontiac Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
DataFAX (800) 289-9108
International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120
DataFAX +1 (559) 292-0435
Pelco Online
http://www.pelco.com
This maintenance/service manual consists of an exploded assembly diagram and parts list.
Use this manual when ordering replacement parts for EH2100/EH2100P camera enclosures.
MAINTENANCE
Regularly scheduled maintenance helps prolong the operational life and appearance of the
equipment. Clean the window with a nonabrasive cleaning cloth and antistatic cleaner that is
safe for use on acrylic plastic. Do not use kerosene or similar substances that can scratch the
surface.
EXPLODED ASSEMBLY DIAGRAM
NOTE:
Enclosure is
shown upside down.
Figure 1. Exploded Assembly Diagram
T able A. Exploded Assembly Parts List
Item Qty Description Part Number
1 1 Back box assembly*
EH2100 EH20101000ASSY
EH2100P EH20201000ASSY
2 1 Cover EH201011000
3 1 Cradle mounting bracket EH20104101COMP
4 1 Camera cradle EH20104102COMP
5 1 Camera mounting knob screw, 1/4-20 x .5-inch P10000
6 1 Clutch PS710000
7 1 Camera pad EH200010004
8 1 Screw, 1/4-20 x .5-inch, hex head ZH1/4-20X.500CH
9 1 Internal tooth lock washer, .25-inch ZH1/4LWSIS
10 2 Screw, 6-32 x .25-inch, Phillips, pan head ZH6-32X.250SPP
11 2 Internal tooth lock washer, #6 ZH6LWSIS
12 1 Screw, 8-32 x .375-inch, button head ZH8-32X.375CRS
13 2 Rivet ZHRIVIT1/8X1/4P
14 1 Hinge EH20104103COMP
15 1 Push nut, #6, black (not shown) ZH6NUTPUSH
16 1 Button head screw, 8-32 x .375-inch (not shown) ZH8-32X.275CRS
17 1 Screw, 8-32 x .5-inch, Phillips, white (not shown) ZH8-32X.5SPPWHT
18 1 Push nut, #8, black (not shown) ZH810000
19 2 Flange extender (not shown) EH20004005COMP
*Includes hinge, item #14
WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of
shipment. Exceptions to this warranty are as noted below:
• Three years on Genex™ Series (multiplexers, server, and keyboard).
• Two years on all standard motorized and fixed focal length lenses.
• Two years on Esprit™, Legacy®, Intercept®, PV1000 Series, CM6700/
CM8500/CM9500/CM9750/CM9760 Matrix, Spectra®, DF5 Series and DF8
Fixed Dome products.
• Two years on WW5700 series window wiper (excluding wiper blades).
• Two years on cameras.
• Six months on all pan and tilts, scanners or preset lenses used in continuous
motion applications (that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 da ys from the date
of Pelco shipment. All goods requiring warranty repair shall be sent freight
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of
misuse, alteration, normal wear, or accident are not covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco f or such Products .
In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer
may also have additional rights, which are subject to variation from state to state.
REVISION HISTORY
Manual # Date Comments
C407SM 10/99 Original version.
If a warranty repair is required, the Dealer must contact Pelco at (800) 2899100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and
provide the following information:
1. Model and serial number
2. Date of shipment, P .O. number , Sales Order n umber , or P elco inv oice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall
under the warranty conditions stated above, please include a written explanation with the product when returned.
Ship freight prepaid to: Pelco
Method of return shipment shall be the same or equal to the method by which
the item was received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for
repair). Goods returned for repair or credit should be clearly identified with
the assigned CA/RA number and freight should be prepaid. All merchandise
returned for credit may be subject to a 20% restocking and refurbishing charge.
Ship freight prepaid to: Pelco
300 West Pontiac Way
Clovis, CA 93612-5699
300 West Pontiac Way
Clovis, CA 93612-5699
®Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.