Pelco EH20-M, EH20-2-H, EH20-3-H specification sheets

PRODUCT SPECIFICATION
EH20 Series Enclosure
COMPACT, INDOOR/ENVIRONMENTAL, IP-ENABLED
camera solutions
Side Opening for Easy Access for Servicing and Installation
High Reliability Die-Cast Construction
Advanced Optics for Megapixel Camera Support
Temperature Range from –30° to 50°C (–22° to 122°F)
Meets IP66 and Type 4X Standards
IK10 Mechanical Impact Resistance
Cable Entry Glands and Mounting Holes on Bottom of Enclosure
24VAC or Power Over Ethernet (PoE) or Mains Power Models
All Models Include Heater and Blower (Except EH20 and EH20-M)
All Models Include Sun Shroud and Mount (Except EH20)
The EH20 Series is a rugged and highly reliable camera enclosure with a side-hinged lid and adjustable sun shroud designed for easy installation. Cons the EH20 Series enclosure is designed to operate in a wide range of environments and to protect electronic components in
temperatures from –30° to 50°C (–22° to 122°F).
The EH20 Series enclosure is designed for use with analog and IP cameras that have both fixed and variable focal length lenses (with or without auto iris operation). The side-hinged lid provides easy access to the camera sled. Two adju bottom of the enclosure allow for easy installation of the power and video cables.
tructed from die-cast aluminum to IK10 and IP66,
, Vandal Resistant
stable glands (PG11) on the
All EH20 Series enclosures come standard with heater and blower (except EH20 and EH20-M), a cable management wall mount bracket, and sun shroud (except EH20). The enclosure can also be ordered from the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ether­net enclosure input voltage, appropriate heater and blower power.
The EH20 Series is ideal for small- to medium-size analog and IP
cameras and can be mounted to Pelco’s EM20 (feedthrough wall
mount).
802.3af-compatible camera power, and
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4047 / Revised 11-17-20
TECHNICAL SPECIFICATIONS
6.22
(2.46)
5.51
(2.17)
8.94
(3.52)
15.75 (6.20)
1/4 - 20 UNC
5.00
(1.97)
5.00
(1.97)
MECHANICAL
Camera Mounting Single slot for adjustable camera positioning
Camera and Lens Size Accepts camera and lens combinations
Viewing Window 0.3 cm (0.118-inch) thick, high optic grade,
Viewing Area 8.89 x 7.62 cm (3.5" W x 3" H) Cable Entry 2 x PG11 compression glands Maximum Cable Diameters
PG11 1.00 cm (0.395 in.)
Cable Entry Holes Both cable entry holes are 1.87 cm (0.74-inch)
Lid Fastening Torx security screws
on camera sled
(including BNC connector) up to 23.5 x 10.1 x 8.3 cm (9.25" L x 4.00" W x 3.25" H)
soda lime glass
on bottom
and will accept PG11 or 3/8-inch NPT conduit fitting as is. Will accept PG13.5 or
1/2-inch NPT fittings if the holes are enlarged to 2.22 cm (0.88-inch).
ELECTRICAL
Input Power 24 VAC or POE+, HPOE, or 110 VAC–230 VAC Input Voltage
PoE IEEE802.3at comp
HPOE (heaters enabled), PoE output to camera
24 VAC ±10%, up to 30W (without camera), up to
43W (with 13W camera), 24 VAC output to camera.
–230 VAC ±10%, up to 30W (without camera), up to
110 VAC
43W (with 13W camera), 12 VDC output to camera.
Max Power Output to Camera 13W
atible (heaters disabled),
CERTIFICATIONS*
CE (Class A)
ICES-003 (Class A)
UL /cUL Listed
UL/IEC 60950-22
Meets Type 4X and IP66 standards
IK10 Mechanical Impact Resistance (Mechanical enclosure only; not the
dow)
front win
KCC
RCM
*At the time of this publication, these certifications are pending. Consult the
factory or our Web site (www.pelco.com).
GENERAL
Construction Die-cast aluminum, ADC10 Finish Alodine with gray polyester powder coat,
Environment Indoor/environmental ambient temperature
Unit Length
Base 17.09 cm (6.73 in) W x 10.90 cm (4.29 in) H x
Enclosure with Sunshr and Wall Mount 47.14 cm (18.56 in) L
Weight Unit Shipping
EH20 2.50 kg (5.50 lb) 2.81 kg (6.20 lb) EH20-M 2.91 kg (6.40 lb) 3.32 kg (7.32 lb) EH20-2-H 3.14 kg (6.92 lb) 3.56 kg (7.84 lb) EH20-3-H 3.43 kg (7.56 lb) 3.62 kg (7.98 lb) EH20-P-H 3.13 kg (6.90 lb) 3.55 kg (7.82 lb)
RAL7047
–30° to 50°C (–22° to 122°F)
Power via PoE+
–10° to 50°C (14° to 122°F)
40.57 cm (15.97 in) L
oud 17.09 cm (6.73 in) W x 23.96 cm (9.43 in) H
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
EM20 Wall Mount (Included)
Construction Aluminum Finish Alodine with gray polyester powder coat
ht Unit Shipping
Weig
0.41 kg (0.90 lb) 0.56 kg (1.22 lb)
EH20 MOUNTING HOLE DIMENSIONS
RECOMMENDED CAMERAS
Sarix®, Sarix Professional, and the Sarix Enhanced series.
EM20 MOUNTING HOLE DIMENSIONS
TECHNICAL SPECIFICATIONS
21.26 (8.37)
70
(2.76)
11.23 (4.42)
7.50
(2.95)
11.00 (4.43)
4.60
(1.81)
6.22
(2.46)
5.51
(2.17)
Ø 0.63
(0.25)
Ø 0.48
(0.19)
8.30
(3.27)
32.39
(12.75)
36.45
(14.35)
Ø 4.14
(1.63)
48.53 (19.11)
47.00
(18.50)
47.60
(18.74)
10.65 (4.19)
11.50 (4.53)
20.00 (7.87)
4.50
(1.77)
18.10 (7.13)
11.35 (4.47)
4.49
(1.77)
8.00
(3.15)
Ø 0.52
(0.20)
13.34 (5.25)
24.57
(9.67)
17.05 (6.71)
21.2 6 (8.37)
70
(2.76)
44.30
(17.44)
47.14
(18.56)
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
EH20 SERIES ENCLOSURE
EM20 INCLUDED WALL MOUNT
EP21 OPTIONAL SMALL POLE MOUNT
Note: Suitable for poles with diameters of 56.7 mm to 136 mm
(2.23 in to 5.35 in).
EC20 OPTIONAL CEILING MOUNT
TECHNICAL SPECIFICATIONS
27.74
(10.92)
7.50
(2.95)
16.60 (6.54)
25.00 (9.84)
18.55 (7.30)
4.49
(1.77)
8.00
(3.15)
Ø 0.52 (0.20)
17.65 (6.29)
14.32 (5.64)
4.49
(1.77)
8.00
(3.15)
13.40 (5.27)
15.00 (5.91)
9.95
(3.92)
Ø 0.52 (0.20)
MODELS
110 VAC to 230 VAC
PoE+/HPOE
Model Number
Heater Fan 24 VAC
EH20
EH20-M
EH20-2-H
EH20-3-H
EH20-P-H
Wall Mount Bracket
OPTIONAL ACCESSORIES
POWER SUPPLIES
Indoor/Outdoor 24 VAC
WCS1-4 Outdoor, 1 output, 4 A (100 VA) capacity
Indoor PoE
POE190-BT* Single Port, IEEE 802.3BT Ty
Pairs PoE Indoor Midspan
*This PoE injector has been specifically designed to work with this enclosure
when heaters are in use. Other PoE injectors may not work. POE130-ATUS, EU Single-port, 30 W IEEE802.3at midspan POE430-ATUS, EU 4-port, 30 W IEEE802.3at midspan POE1236-ATUS, EU 12-port, 36 W IEEE802.3at midspan POE2436-ATUS, EU 24-port, 36 W IEEE802.3at midspan
Note: The “EU“ or “US“ suffix indicates a European or US power cord.
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
EP20 LARGE POLE MOUNT
pe 4, GbE, 90W 4-
OPTIONAL MOUNTS
EM20 Wall mount bracket with cable management EP20 Pole mount bracket, large EC20 Ceiling mount bracket EP21 Pole mount bracket, small (for EM20
enclosure mount)
ACCESSORIES
EM20JB Wall mount junction box for EM20 enclosure
The following combinations of lens and Sarix Box cameras are compatible with EH20:
Lens Model Sarix Box Camera Models
MI2.8-8.5P Sarix Enhanced 3 IXE; Sarix Pro 3 IXP
MI3.9-10P Sarix Enhanced 3 IXE; Sarix Pro 3 IXP
MI9-50P Sarix Enhanced 3 IXE; Sarix Pro 3 IXP
M2.7-13 Sarix Pro 3 IXP
M8-80 Sarix Pro 3 IXP
M1.8-3 Sarix Pro 3 IXP
M2.8-8.5P Sarix Pro 3 IXP
M9-40P Sarix Pro 3 IXP
YV2.7X2.2SR4A Sarix Pro 3 IXP
YV2.8X2.8SR4A Sarix Pro 3 IXP
X15SR4A Sarix Pro 3 IXP
YV3.3
EM20JB WALL MOUNT JUNCTION BOX
mount
Note: Suitable for poles with diameters of 70 mm to 120 mm (2.75 in to 4.72 in) and 120 mm to 230 mm (4.72 in to 9.05 in).
Pelco, Inc.
625 W. Alluvial, Fresno, California 93711 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication
are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc.
All other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2020, Pelco, Inc. All rights reserved.
Loading...