PRODUCT SPECIFICATION
C20-CH SERIES
(LENS NOT SUPPLIED WITH CAMERA)
camera solutions
C20-CH Series Analog Color Camera
18 TO 32 VAC (REVISION A), 1/3-INCH, ULTRA HIGH RESOLUTION, 650 TVL (NTSC/PAL)
Product Features
• 650 TV Lines
• 0.25 Lux Sensitivity
• 1/3-Inch Format CCD Imager
• Digital Signal Processing
• CS Lens Mount
• Autosensing DC Drive Auto Iris
• Digital Electronic Day/Night
• Automatic/Manual White Balance Settings for Difficult Lighting
Situations
• Selectable Automatic Gain Control
• Advanced Backlight Compensation
• Autosensing Power; 18 to 32 VAC/12 VDC with Internal
Synchronization (Revision A)
• 2D Digital Noise Reduction (DNR)
• Privacy Zones
• Built-in Unshielded Twisted Pair (UTP) Output
• Motion Detection
• Camera Titles
• Adaptive Tone Reproduction (ATR) to Compensate for Gradation of
Subjects to an Optimum Level
The C20-CH Series is Pelco’s general purpose digital color CCD
camera. It is designed for installations with fixed lighting conditions.
Its full features insure that images are clear and crisp at all times
under consistent light. The camera’s size, combined with its
numerous features, makes it the ideal camera for most applications.
The C20-CH Series is an ultra high resolution digital camera with
650 TVL of resolution and 0.25 lux minimum illumination. Camera
features include autosensing power; 18 to 32 VAC or 12 VDC with
internal synchronization (Revision A), and automatic gain control
(AGC).
The C20-CH Series includes automatic white balance (AWB) for
difficult lighting situations, digital noise reduction for clearer image
quality, and backlight compensation (BLC) that adjusts the picture to
prevent objects from appearing dark due to a strong backlight.
The C20-CH Series also features built-in analytical capabilities
including privacy zones, motion detection, and camera titles. These
features are easily set using the on-screen menus.
The convenient on-screen menu contains features that are not
typically found in a general purpose camera including area masking,
titling, pixel correction, and preset lighting profiles.
The C20-CH Series is quick and easy to install. The camera is also
®
featured in Pelco’s DomePak
and ImagePak® fixed camera dome/
enclosure packages. The optional C10-UM wall/ceiling/rail mount kit
offers easy installation in many nonenclosure applications, for all
models.
The C20-CH Series has a standard CS lens mount and can be used
with fixed, manual, or auto iris (DC drive) lenses. The iris is controlled
through a standard 4-pin square connector that is included on all
Pelco auto iris lenses.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4006 / NEW 4-30-14
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All oth er product names and
services are the property of their respect ive companies.
Product specifications and availability are subject to change without notice.
©Copyright 2014, Pelco, Inc. All rights reserved.
MODELS
C20-CH-6 1/3-inch CCD high resolution color box
camera, 18 to 32 VAC or 12 VDC, NTSC format
(Revision A)
C20-CH-6X 1/3-inch CCD high resolution color box
camera, 18 to 32 VAC or 12 VDC, PAL format
(Revision A)
C20-CH-7X 1/3-inch CCD high resolution color box
camera, 220 VAC, PAL format
GENERAL
Imaging Device Sony® 1/3-inch EXview HAD CCD II™ 960H
Signal Processing Sony new digital signal processor, Effio-E
Picture Elements
NTSC 976 (H) x 494 (V), approx. 480k
PAL 976 (H) x 582 (V), approx. 570k
Sensing Area 4.7 x 3.5 mm (3/16 x 1/8-inch)
Scanning System
NTSC 525 lines, 2:1 interlace
PAL 625 lines, 2:1 interlace
Synchronization System Internal
Horizontal Resolution 650 TV lines
Auto Iris Lens Type DC drive
Sensitivity 0.25 lux, f/1.2, 30 IRE
Electronic Day/Night Switch
Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment)
Automatic Gain Control On/off 35 dB
Backlight Compensation Yes
White Balance ATW/push lock/manual/anti-CR/user2/
user/push
Color Correction With white balance
Gamma Selectable (ATR)
Video Output 1 Vp-p, 75 ohms
Auto White Balance Range 2,500° to 9,500°K
Noise Reduction (DNR) 2D
Privacy Zones Yes
Motion Detection Yes
Camera Titles Yes
ELECTRICAL
Power Requirement*
C20-CH-6 18 to 32 VAC 60 Hz/12 VDC +10% to –15%
(Revision A)
C20-CH-6X 18 to 32 VAC 50 Hz/12 VDC +10% to –15%
(Revision A)
C20-CH-7X 220 VAC +10% to –15%, 50 Hz
Power Consumption
C20-CH-6/C20-CH-6X 3.5 W
C20-CH-7X 4 W
Power Connector 2-pin terminal block with push lock, or line
cord on 220 VAC models
Video Connector BNC
Auto Iris Connector 4-pin connector (miniature square)
*Suggested installations (Revision A):
For outdoor environmental conditions from –30° to 50°C (–22° to 122°F),
use only an AC power supply source (18 to 32 VAC).
For indoor or outdoor applications with ambient temperatures of 0° to 50°C
(32° to 122°F), use 12 VDC power, or an AC power supply source
(18 to 32 VAC).
MECHANICAL
Lens Mount CS mount
Camera Mount 1/4-inch UNC-20 screw, top or bottom of
camera housing
ENVIRONMENTAL
Operating Temperature –10° to 50°C (14° to 122°F)
Storage Temperature –20° to 60°C (–4° to 140°F)
Operating Humidity 20% to 90%, noncondensing
Storage Humidity 20% to 90%, noncondensing
™
PHYSICAL
Dimensions (includes BNC) 108 x 60 x 55 mm
(4.25" L x 2.36" W x 2.17" H)
Weight (without lens)
C20-CH-6/C20-CH-6X 0.30 kg (0.66 lb)
C20-CH-7X 0.45 kg (0.99 lb)
Shipping Weight
C20-CH-6/C20-CH-6X 0.55 kg (1.21 lb)
C20-CH-7X 0.60 kg (1.32 lb)
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
RECOMMENDED MOUNTS
C10-UM C10 series universal wall/ceiling/rail
mount kit
RECOMMENDED POWER SUPPLIES
TF2000 Power supply for one camera, 20 VA
MCS Series Multiple camera power supply, indoor
WCS Series Single/multiple camera power supply,
outdoor
RECOMMENDED LENSES
13VA, 13VD Series Varifocal lenses, 1/3-inch format;
13ZD Series Motorized zoom lenses, 1/3-inch format
13VA (manual iris); 13VD (auto iris, DD)
(auto iris, DD)
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community