Pelco C612M-A User Manual
C612M-A (8/05)
Endura
™
NET5301PS Power Supply
The optional NET5301PS is a Class 2 isolated power supply specifically designed for Endura
47-63 Hz (0.7 A maximum). It supplies 12 VDC ±10% (2.0 A maximum) to either a single NET5301T video encoder or a single NET5301R video decoder.
The environmental specifications are as follows:
• Operating Temperature 32˚ to 158˚F (0˚ to 70˚C)
• Storage Temperature -40˚ to 185˚F (-40˚ to 85˚C)
• Operating Humidity 5% to 95%, noncondensing
If you are installing several NET5301 encoder/decoder units, consider installing them in an RK5000PS-5U rack mount kit, which supports up to 12 units.
™
video encoders and decoders. Input voltage is 100-240 VAC ±10%,
Parts List
Qty Description
1 NET5301PS power supply with 7 ft (2.1 m) cord and connector
1 USA standard power cord (6 ft or 1.8 m)
1 European standard power cord (6 ft or 1.8 m)
1 UK standard power cord (6 ft or 1.8 m)
1 Installation manual
Installation
1. Position the NET5301T video encoder or the NET5301R video decoder in its operating location, either on a desktop or in a WM5000 Series wall mount kit.
DESKTOP
WALL MOUNT
Figure 1. Placement Options
2. Position the NET5301PS less than 7 ft (2.1 m) from the NET5301 unit and less than 6 ft (1.8 m) from a power outlet. Then connect the appropriate
power cord to the NET5301PS.
NOTE: Do not plug the other end of the power cable into a power outlet until step 4.
USA STANDARD
WALL PLUG
EUROPEAN STANDARD
WALL PLUG
OR
POWER CORD
(6 FT/1.8 M)
UK STANDARD
WALL PLUG
POWER
SUPPLY
POWER CORD
(7 FT/2.1 M)
POWER
INDICATOR
Figure 2. Power Cable Options
3. Connect the four-pin power connector from the NET5301PS to the four-pin power connector on the NET5301 unit.
NET5301R
NET5301T
FOUR-PIN
POWER
CONNECTOR
POWER
INDICATOR
Figure 3. Connecting Power
4. Plug the power cable into a power outlet. The green indicator on the power supply should glow. The blue Pelco badge and the green unit status
indicator on the NET5301 front panel should also glow.
Loading...