
IMPORTANT NOTE
Due to recent end-of-life motherboard changes, the location of the input/output connectors on the Integral
®
Digital Sentry
manual (C3662M) and the quick start guide for this model. These publications are currently being updated
to incorporate the recent changes.
If you need technical assistance with this product, please contact Pelco Product Support at (800) 289-9100
or +1 (559) 292-1981.
Pelco, the Pelco logo, and Digital Sentry are re gistered trademarks of Pelco, Inc. ©Copyright 2008, Pelco, Inc. All rights reserved.
unit’s back panel can vary from the location shown in the Integral Digital Sentry Installation
Pelco, Inc. Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel: (800) 289-9100 • Fax: (800) 289-9150
International • Tel: +1 (559) 292-1981 • Fax: +1 (559) 348-1120 C3677M (7/08)
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

Package Contents
C3667M (5/08)
DS 1000
Digital Video Management System
Quick Start Guide
SHIPPING BOX
ACCESSORY PACK
ACCESSORY PACK
OPERATION MANUAL,
RESOURCE DISC,
RECOVERY DISC
DS1000
FRONT BEZEL KEY
2 EA.
QUICK START GUIDE
STANDARD USB
KEYBOARD AND MOUSE
STANDARD
POWER CORD
1 EA.

Legend
MONITOR
AUDIO
INPUTS
Rear Panel
VGA
DVI
MONITOR
OUTPUTS
CAMERAS
KEYBOARDMOUSEPTZ CAMERAANALOG
USBAUDIO
NETWORK1394a
FIREWIRE
INPUTS
POWER
SWITCH
ALARM
STORAGE
CABLE
PRINTERRAID
NOT USEDPOWER
NOTE: The top row of video input BNCs (inputs17-32) is available only
on 32-input systems. The SCSI connector for RAID storage is optional.
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
AUDIO IN 4
GROUND 1
AUDIO IN 5
AUDIO IN 6
AUDIO IN 7
AUDIO IN 8
GROUND 2
AUDIO IN 9
AUDIO IN 10
AUDIO IN 11
AUDIO IN 12
GROUND 3
AUDIO IN 13
AUDIO IN 14
AUDIO IN 15
AUDIO IN 16
GROUND 4
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel: (800) 289-9100 • Fax: (800) 289-9150
International • Tel: +1 (559) 292-1981 • Fax: +1 (559) 348-1120
Pelco, the Pelco logo, and Digital Sentry are r egistered trademarks of Pelco, Inc. ©Copyright 2008, Pelco, Inc. All rights reserved.
The materials used in the manufactu re of this document and its components are compliant to the requirem ents of Directive 2002/95/EC.