Pelco C3610m-a User Manual
Endura
®
License Manager
Installation
Video Security System
C3610M-A (1/08)
Contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Endura License Manager Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Behaviors on the Endura System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assigning or Removing a Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 C3610M-A (1/08)
Description
The Endura® system supports intelligent video analysis through object and activity behaviors that are
installed on NET5301T-I intelligent video encoders. Use the Endura License Manager to install and manage
behaviors. This application can be installed on any computer that is connected to the Endura system.
The following behaviors may be installed on intelligent encoders:
• Abandoned Object Behavior: Detects objects that are left in a defined area for too long and then
triggers an alarm. Refer to Endura Abandoned Object Behavior Operation/Configuration (C36 02M)
for more information about this behavior.
• Adaptive Motion Behavior: Detects and tracks objects that enter a user-defined zone. Refer to
Endura Adaptive Motion Behavior Operation/Configuration (C3600M) for more information about
this behavior.
• Camera Sabotage Behavior: Triggers an alarm if an unnatural contrast change occurs in the field
of view. Refer to Endura Camera Sabotage Behavior Operation/Configuration (C3605M) for more
information about this behavior.
• Directional Motion Behavior: Generates an alarm when a person or object moves against the
flow of traffic. Refer to Endura Directional Motion Behavior Operation/Configuration (C3601M) for
more information about this behavior.
• Object Counting Behavior: Calculates the number of objects that enter a defined zone or cross a
defined trip wire. Refer to Endura Object Counting Behavior Operation/Configuration (C3603M) for
more information about this behavior.
• Object Removal Behavior: Triggers an alarm if an object is removed from a user-defined zone.
Refer to Endura Object Removal Behavior Operation/Configuration (C3604M) for more information
about this behavior.
• Vibration Removal Behavior: Specifically designed for installations on roof tops, or near heavy
equipment that cause video vibration. Refer to Endura Vibration Removal Behavior Operation/
Configuration (C3606M) for more information about this behavior.
C3610M-A (1/08) 3
Endura License Manager Installation
1. Place the installation CD into the CD or DVD drive of your computer. The InstallShield Wizard starts
to run, and guides you through the installation process. The Endura License Manager Welcome
screen appears.
Figure 1. Installation Welcome Screen
2. Click Next. The Pelco End-User Software License Agreement screen appears.
Figure 2. Pelco End-User Software License Agreement
3. Review the license agreement, and then click Next.
4. Follow the instructions on the screens to install the license manager.
4 C3610M-A (1/08)
Loading...