Pelco C3426M-A User Manual
INSTALLATION
IS110 Series
Camclosure
Integrated Camera System
®
C3426M-A (5/07)
Contents
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cover and Back Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Unshielded Twisted Pair (UTP) Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic Surface Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4S Electrical Box Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
404 Plaster Ring Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Side Conduit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Camera Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Module Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Camera Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Module Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Camera Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Varifocal Lens Zoom and Focus Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DN/CH Series Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Auto Iris Level Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Vertical Phase Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Blemish Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Day/Night Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DW/CW Series (Wide Dynamic Range) Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Auto Iris Level Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Vertical Phase Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Blemish Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Camera Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Install Liner and Trim Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Service Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
C3426M-A (5/07) 3
List of Illustrations
1 Package Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 Basic Surface Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 4S Electrical Box Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4 404 Plaster Ring Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Side Conduit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Camera Module Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 Back Box Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8 Camera Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9 Location of Zoom and Focus Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10 Adjusting the IS110-DN/CH Series Camclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
11 Threshold Switching Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
12 Adjusting the IS110-DW/CW Series Camclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
13 Threshold Switching Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
14 Positioning the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
15 Adjusting the Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
16 Service Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
17 Attaching the 2.5 mm Monaural Headphone Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4 C3426M-A (5/07)
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce,
Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
WARNING: This product is sensitive to Electrostatic Discharge (ESD). To avoid ESD damage to
this product, use ESD safe practices during installation. Before touching, adjusting or handling
this product, correctly attach an ESD wrist strap to your wrist and appropriately discharge your
body and tools. For more information about ESD control and safe handling practices of electronics,
please refer to ANSI/ESD S20.20-1999 or contact the Electrostatic Discharge Association
(www.esda.org).
The materials used in the manufacture of this document and its components are compliant to the
requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste
electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling
this equipment.
C3426M-A (5/07) 5
Description
The IS110 Series Camclosure® integrated camera system combines an environmental cover, back
box, camera, lens, and lower dome into a small, high-security system that is quick and easy to install.
The system is perfect for a variety of indoor and outdoor applications and its versatile design allows
for multiple mounting options. The unit supports both BNC and unshielded twisted pair (UTP) video
wiring.
The IS110 Series Camclosure integrated camera system can be installed directly to a ceiling, wall,
4S electrical box (using the optional ICS110-AP adapter plate), or a standard plaster ring. The system
has three conduit openings: two in the base and a threaded 0.75-inch (1.91 cm) opening in the side.
Before installing your new system, thoroughly familiarize yourself with the information in this
manual.
MODELS
Indoor/outdoor dome, vandal resistant, surface mount, smoked bubble, gray finish
Camera Type Lens/Iris NTSC PAL
Color, Wide Dynamic
Range, Day/Night
Color, High
Resolution, Day/
Night
Color, Wide Dynamic
Range
Color, High Resolution 3-9.5 mm, Varifocal, Auto Iris
3-9.5 mm, Day/Night
Varifocal, Auto Iris
9-22 mm, Day/Night
Varifocal, Auto Iris
3-9.5 mm, Day/Night
Varifocal, Auto Iris
9-22 mm, Day/Night
Varifocal, Auto Iris
3-9.5 mm, Varifocal, Auto Iris IS110-CWV9
9-22 mm, Day/Night
Varifocal, Auto Iris
9-22 mm, Varifocal, Auto Iris
3.0 mm, Fixed, Manual Iris
3.6 mm, Fixed, Manual Iris
6.0 mm, Fixed, Manual Iris
8.0 mm, Fixed, Manual Iris
12.0 mm, Fixed, Manual Iris
IS110-DNV9 IS110-DNV9X
IS110-DNV22 IS110-DNV22X
IS110-CHV9
IS110-CHV22
IS110-CH3.6
IS110-DWV22
IS110-CWV22
IS110-CH3
IS110-CH6
IS110-CH8
IS110-CH12
IS110-DWV9
IS110-CHV9X
IS110-CHV22X
IS110-CH3.6X
IS110-CH12X
IS110-CH3X
IS110-CH6X
IS110-CH8X
6 C3426M-A (5/07)
Indoor/outdoor dome, vandal resistant, surface mount, clear bubble, liner, gray finish
Camera Type Lens/Iris NTSC PAL
Color, Wide Dynamic
Range, Day/Night
3-9.5 mm, Day/Night
Varifocal, Auto Iris
9-22 mm, Day/Night
IS111-DWV9
IS111-DWV22
Varifocal, Auto Iris
Color, High
Resolution, Day/
Night
3-9.5 mm, Day/Night
Varifocal, Auto Iris
9-22 mm, Day/Night
IS111-DNV9 IS111-DNV9X
IS111-DNV22 IS111-DNV22X
Varifocal, Auto Iris
Color, Wide Dynamic
Range
3-9.5 mm, Varifocal, Auto Iris IS111-CWV9
9-22 mm, Day/Night
IS111-CWV22
Varifocal, Auto Iris
Color, High Resolution 3-9.5 mm, Varifocal, Auto Iris
9-22 mm, Varifocal, Auto Iris
3.0 mm, Fixed, Manual Iris
3.6 mm, Fixed, Manual Iris
6.0 mm, Fixed, Manual Iris
8.0 mm, Fixed, Manual Iris
12.0 mm, Fixed, Manual Iris
IS111-CHV9
IS111-CHV22
IS111-CH3
IS111-CH3.6
IS111-CH6
IS111-CH8
IS111-CH12
IS111-CHV9X
IS111-CHV22X
IS111-CH3.6X
IS111-CH12X
IS111-CH3X
IS111-CH6X
IS111-CH8X
C3426M-A (5/07) 7
PARTS LIST
Qty Description
1 IS110 Series Camclosure integrated camera system
•
Cover and back box (assembled)
•
Trim ring with bubble; clear bubble models include a liner
•
Camera module
1 Black plug
1 1/8-inch hollow screwdriver bit
2 8-32 x 0.375-inch Phillips pan head screws with washers (attached to cover and back box)
3 6-32 x 0.75-inch Phillips pan head screws
2 8-32 x 0.75-inch Phillips flat head screws
2 8-32 x 0.75-inch Phillips pan head screws
8 C3426M-A (5/07)
SHIPPING BOX
CAMERA MODULE
(1)
TRIM RING AND
SMOKED BUBBLE
(1)
BLACK PLUG
(1)
SHOWN ACTUAL SIZE
< OR >
COVER AND
BACK BOX (1)
TRIM RING, LINER,
AND CLEAR BUBBLE
(1)
1/8-INCH HOLLOW
SCREWDRIVER BIT (1)
6-32 X 0.75-INCH
PHILLIPS PAN HEAD
SCREWS (3)
8-32 X 0.75-INCH
PHILLIPS FLAT HEAD
SCREWS (2)
Figure 1.
C3426M-A (5/07) 9
8-32 X 0.75-INCH
PHILLIPS PAN HEAD
SCREWS (2)
Package Components
8-32 X 0.375-INCH
PHILLIPS PAN HEAD
SCREWS WITH
WASHERS (2 EACH)
Cover and Back Box Installation
The IS110 Series Camclosure integrated camera system mounts only to a surface. It can be wired
through the cover into a surface, electrical box, or plaster ring. You can also wire it through a side
conduit.
UNSHIELDED TWISTED PAIR (UTP) VIDEO
The IS110 Series offers support for unshielded twisted pair (UTP). The UTP video output signal is
1 Vp-p differential into a 100-ohm load. At a minimum, UTP requires Cat5, 100-ohm twisted pair
cable.
BASIC SURFACE INSTALLATION
NOTE:
You should install the camera module into the back box before installing the back box into the
cover. When installing the back box into the cover, rotate the camera module to access the mounting
holes (refer to
1. Remove the two 8-32 x 0.375-inch Phillips pan head screws and washers to separate the
2. Using the cover as a template, mark one of the large holes on the mounting surface.
3. Cut out the hole for the power and video wiring.
4. Pull the video and power wires through the hole in the cover.
5. Attach the cover to the mounting surface (hardware not supplied). Use stainless steel
6. Connect the video cable/wires:
7. Connect the power wires.
Camera Module
cover from the back box.
hardware when installing the system outdoors.
•
BNC:
Connect the BNC connector from the unit to a mating BNC connector.
•
UTP:
Blue wire = Video +
Gray wire = Video -
Voltage Red Wire Black Wire
12 VDC + Ground
24 VAC ~ ~
on page 16 for more information).
AC operation only:
connect one side of the transformer to the red wire on all units; connect the other side of the
transformer to the black wire on all units.
NOTE:
Failure to connect all AC powered units the same way will cause the cameras to be out
of phase with each other and may produce a vertical roll when switching between cameras.
10 C3426M-A (5/07)
If you are wiring more than one Camclosure to the same transformer,
8. Reinstall the back box inside the cover. For vandal-resistant installations, rotate the back box
to position the conduit plug opposite the notch on the side of the cover. Use the two
8-32 x 0.375-inch Phillips pan head screws and washers (removed earlier) to secure the back
box to the cover.
COVER
MOUNTING
SCREWS
(NOT SUPPLIED)
BACK BOX
8-32 X 0.375-INCH
PHILLIPS PAN HEAD
SCREWS WITH WASHERS
(SUPPLIED)
Figure 2.
Basic Surface Installation
4S ELECTRICAL BOX INSTALLATION
NOTE:
You should install the camera module into the back box before installing the back box into the
cover. When installing the back box into the cover, rotate the camera module to access the mounting
holes (refer to
1. Attach an ICS110-AP adapter plate (not supplied) to a 4S box. Use two 8-32 x 0.75-inch
2. Remove the two 8-32 x 0.375-inch Phillips pan head screws and washers to separate the
3. Pull the video and power wires into the cover.
4. Attach the cover to the adapter plate with up to four 8-32 x 0.375-inch Phillips pan head
5. Connect the video cable/wires:
Camera Module
on page 16 for more information).
Phillips flat head screws (supplied with both the IS110 and the adapter plate).
cover from the back box.
screws (supplied with the adapter plate). Use stainless steel hardware when installing the
system outdoors.
•
BNC:
Connect the BNC connector from the unit to a mating BNC connector.
•
UTP:
Blue wire = Video +
Gray wire = Video -
C3426M-A (5/07) 11
Loading...