This document is an addendum to the DVR5100 Series digital video recorder (DVR) installation and operation manuals and provides an update on
new packaging, equipment, and features of the DVR5100 Series.
This document covers the following topics (clicking on any topic in the list takes you directly to that section):
•DVR5100 Parts List
•USB PC Keyboard, Mouse, and Template for the DVR5100
•Auto Login
•Automatically Assigning Cameras to the Workspace
•Extending Video Retention by Changing Frame Rate
•Remote Client
–Digital Zoom Controls
–Timeline Synchronization in Quick Search
UNITS BEING UPDATED FROM A PREVIOUS SOFTWARE VERSION
To protect the system against the possibility of file and database corruption during the update process, the DVR5100 checks the integrity of the
image on the CD before starting the update, and the database and system files after the update. If the update is not completed properly, the
DVR5100 restarts using the existing operating system image. To check that the update is completed successfully, display the Help screen and
check the version number. Note that the release number changes to reflect each new software release.
Figure 1. DVR5100 Help Menu
C2669M (4/07)3
DVR5100 Parts List
A USB keyboard and mouse, and a keyboard overlay (template) have been added to the existing parts list.
Qty Description
1Pelco DVR5100 Series DVR
1Rack-mounting kit:
2 Chassis mounting brackets with handles and thumb screws
8 Screws, 10-32 x 0.25-inch, Phillips, pan head (four for each bracket)
2 Adjustable support rail sets (each set includes one front-mounting rail and one rear-mounting rail)
6 Screws, 8-32 x 0.375-inch, Phillips, truss head
4 Screws, 10-32 x 0.5-inch, Phillips, flat head (two for each front-mounting rail)
4 Screws, 10-32 x 0.75-inch, Phillips, pan head (two for each rear-mounting rail)
10 Cage nuts (for use with square-hole racks)
1USB PC Keyboard
1USB Keyboard overlay (template)
1USB PC Mouse
1–2 Terminal blocks for relays (one block for 4- and 8-channel models, two blocks for 16-channel models)
2–4 Terminal blocks for alarms (two blocks for 4- and 8-channel models, four blocks for 16-channel models)
3Power cables (one USA standard, one European standard, and one UK standard)
2Product identification labels (attached to unit)
3DVR5100 Quick Start Guides
1DVR5100 Installation manual
1DVR5100 Operation manual (on resource CD)
1DVR5100 Control Pad Quick Reference Guide
1DVR5100 Remote Client Operation manual (on resource CD)
1DVR5100 Recovery Instructions
1Important Safety Instructions
1Resource CD
1Recovery disc
4C2669M (4/07)
USB PC Keyboard, Mouse, and Template for the DVR5100
The DVR5100 provides a control pad on the front panel that allows you to access the unit’s user interface (UI). A USB PC keyboard and mouse,
and a keyboard overlay (template) are now included as an alternate method to accessing the UI. The control pad or the keyboard are used
together to make selections in the UI to set up and operate the unit. The USB mouse provides a convenient method to navigate the setup and
configuration menus.
The DVR5100 provides three USB ports: one USB port on the front panel and two USB ports on the rear panel. Any of the USB ports can be used
to connect a USB PC keyboard and mouse to the DVR5100.
To connect a keyboard and mouse to the DVR5100:
1. Connect the USB mouse to the USB port on the front panel.
2. Connect the USB PC keyboard into one of the USB ports on the rear panel.
NAVIGATING THROUGH MENUS WITH A USB PC KEYBOARD AND MOUSE
Figure 2 illustrates the USB PC keyboard overlay (template). Table A lists the USB PC keyboard and mouse operations.
Figure 2. USB PC Keyboard Template
Table A. USB PC Keyboard and Mouse Operations
USB PC Keyboard
Key
EnterSelects a menu item. Performs the same actions as the Enter/Shift key on the DVR5100 control pad.
F1-F4Perform the same actions as the four color-coded function keys on the DVR5100 control pad.
F5-F8Changes the screen layout from the single, 2 x 2, 3 x 3, and 4 x 4 display layouts respectively.
F9Displays the Camera Selection dialog box.
Tab or + Tab
Esc (Escape)Closes a menu.
+ (Plus)
- (Minus)
Menu Operations
Moves to the next field or tab on a menu, or selects the next command on a dialog box or screen. Press
+Tab to move to the previous field or tab on a menu.
In live view mode, displays the next camera in the currently selected video pane. In pan/tilt/zoom (PTZ)
mode, zooms in on the scene. In the menus, expands the device tree or increases a number in a text field.
While viewing recorded video, advances the video one frame at a time.
In live view mode, displays the previous camera in the currently selected video pane. In PTZ mode, zooms
out of the scene. In the menus, closes the device tree or decreases a number in a text field. While viewing
recorded video, reverses the video one frame at a time.
Down or Up Arrow
Ctrl + Down Arrow/Ctrl + Up ArrowIn the menus, increases or decreases the number in a field, or selects the next or previous entry in a list.
Right or Left Arrow
C2669M (4/07)5
In PTZ mode, tilts the currently selected camera down or up. In the menus, selects the next or previous
entry in a list on a menu or dialog box.
In PTZ mode, pans the currently selected camera right or left. In the menus, moves to the next or previous
field on a menu or dialog box.
Table A. USB PC Keyboard and Mouse Operations (Continued)
Ctrl + Right Arrow/Ctrl + Left ArrowIncreases or decreases the audio volume.
Page Up or Page Down
Scrolls forward or backward through the timeline on the Quick Search dialog box, or selects the next or
previous entry in a list on a menu or dialog box.
BackspaceReturns to the previous menu; performs the same action as turning the shuttle counterclockwise.
Use any alphanumeric key on the keyboard to enter information in a text field such as a password, IP
Alphanumeric keypad
address, comment or other field. Do not enter characters that are not valid for the currently selected field.
Refer to the specific instructions for the field for guidelines on valid entries. See the descriptions in this
table for additional functions for specific characters.
< or , (comma)Plays recorded video backward.
> or . (period)Plays recorded video forward.
lSwitches the currently selected video pane to live view mode.
mDisplays the main menu.
pIn live view mode, plays or pauses the video in the currently selected video pane.
rIn live view mode, starts recording video in the currently selected video pane.
sDisplays the Quick Search dialog box for the currently selected video pane.
xOpens the Quick Export dialog box.
zSwitch to PTZ mode.
USB PC Mouse (For configuration use only)
Left-Click
Selects a menu icon, text field, or check box; executes a command key; and displays the next tab on a
configuration screen. Point and click on an up or down arrow next to a text field to increase or decrease
the number or to select the next or previous entry in a list.
6C2669M (4/07)
Auto Login
The DVR5100 comes with four pre-defined user profiles: Administrator, Manager, Operator, and Guest. The first time you start the DVR5100, the
system automatically logs in using the admin user after 60 seconds if an operator does not select a specific user at the login screen. This feature
allows the system to automatically log in as the designated user each time the DVR is rebooted (for example, after a power failure or when the
unit is restarted for any purpose). You can enable or disable the feature from the System Configuration screen. In addition, you can choose a
specific user for subsequent log ins.
NOTE: As a security precaution, you should change the user ID for auto-login as part of the configuration and setup process. Consider selecting
Guest as the default user ID or create a new user ID and password with limited access. Using a Guest user assures that system settings are not
accessible inadvertently.
Table B lists the default user IDs and passwords. Figure 3 shows the login screen.
Table B. Default User IDs and Passwords
User IDPassword
adminadmin or 23646
managermanager or 6262437
operatoroperator or 67372867
guestguest or 48378
Figure 3. Auto Login Menu
C2669M (4/07)7
Automatically Assigning Cameras to the Workspace
The DVR5100 automatically assigns or prepopulates cameras to the workspace. Cameras are configured starting at the top left video pane and
ending at the lower right video pane. Figure 4 shows a 2 x 2 configuration.
Figure 4. Auto Camera Assignment
8C2669M (4/07)
Extending Video Retention by Changing Frame Rate
Traditionally, users looking to retain video for as long as possible were forced to compromise between recording at a lower quality and a lower
frame rate. The DVR5100 now introduces a powerful alternative to achieving longer retention times.
Pelco's patented EnduraStor
one image, one image every two seconds, and one image every three seconds after a defined period of time. Instead of recording from the very
beginning at a very slow rate, EnduraStor allows you to retain high frame rate video for the time period it is needed most. When programming
the EnduraStor delay period, you can customize the storage options to suit your operation model. You can get the retention targets you are
looking for while realizing the benefit of having 30/25 images per second (ips) video available for investigation and export. The DVR5100 now
provides additional flexibility that allows you to optimize your recorded video to meet budget constraints.
Table C lists the recording rates.
™
technology provides you with the ability to prune recorded video down to five images, three images, two images,
Table C. Options for Picture Quality
Frame Rate
Quality OptionsResolution
High 30/254CIF30 (25)2 images every second
High 15/12.54CIF15 (12.5)2 images every second
High 10/8.34CIF10 (8.3)2 images every second
High 6/54CIF6 (5)2 images every second
Medium 30/252CIF30 (25)2 images every second
Medium 15/12.52CIF15 (12.5)2 images every second
Medium 10/8.32CIF10 (8.3)2 images every second
Medium 6/52CIF6 (5)2 images every second
Low 30/25CIF30 (25)2 images every second
Low 15/12.5CIF15 (12.5)2 images every second
Low 10/8.3CIF10 (8.3)2 images every second
Low 6/5CIF6 (5)2 images every second
New Settings Added*
High 5 images/second4CIF30 (25)5 images every second
High 3 images/second4CIF30 (25)3 images every second
High 1 image/second4CIF30 (25)1 image every second
High 1 image/2 seconds4CIF30 (25)1 image every 2 seconds
High 1 image/3 seconds4CIF30 (25)1 image every 3 seconds
High 1 image/5 seconds4CIF30 (25)1 image every 5 second
Medium 5 images/second2CIF30 (25)5 images every second
Medium 3 images/second2CIF30 (25)3 images every second
Medium 1 image/second2CIF30 (25)1 images every second
Medium 1 image/2 seconds2CIF30 (25)1 image every 2 seconds
Medium 1 image/3 seconds2CIF30 (25)1 image every 3 seconds
Low 5 images/secondCIF30 (25)5 images every second
Low 3 images/secondCIF30 (25)3 images every second
Low 1 image/secondCIF30 (25)1image every second
Low 1 image/2 secondsCIF30 (25)1 image every 2 seconds
Low 1 image/3 secondsCIF30 (25)1 image every 3 seconds
NTSC (PAL)EnduraStor Rate
*New settings are recorded at 30/25 ips unless EnduraStor is enabled, at which point
recorded video is pruned to the designated image rate. For information on using
EnduraStor, refer to the DVR5100 Series Digital Video Recorder Installation manual
(C1695M).
C2669M (4/07)9
•
NOTES:
The default setting for the DVR5100 frame rate was formerly Low 30/25, EnduraStor not enabled.
The default setting for the DVR5100 frame rates is now Low 1 image/second, EnduraStor enabled after 12 hours.
Remote Client
The DVR5100 Remote Client has the following new features:
•Digital Zoom Controls
•Synchronization in Quick Search
DIGITAL ZOOM CONTROLS
Similar to controlling PTZ on a camera, digital zoom controls let you zoom in on specific areas of the video that you are viewing. Digital zoom
controls work on any video, not just on video recorded on a camera that supports PTZ functions. This feature is also available while viewing
exported video with the Endura Player. To use digital zoom controls, you must be viewing video from a camera in single view (1 x 1).
•
Table D. Image Resolutions (in Pixels)
NTSC ResolutionsPAL Resolutions
4CIF704 x 4804CIF704 x 576
2CIF704 x 2402CIF704 x 288
CIF352 x 240CIF352 x 288
1. Select a camera and switch to a 1 x 1 view.
2. Click the Digital Zoom button . The view displays the video with a picture within the picture.
3. Click the mouse anywhere in the view, and then roll the center wheel of the mouse away from you to zoom in. To zoom out of the picture,
roll the center wheel of the mouse toward you.
To zoom in or out on a different area of the scene, press and hold the left mouse button anywhere in the picture, and then move the mouse in any
direction. A white frame inside the smaller picture indicates which part of the video you are working with.
Figure 5. Digital Zoom Sample
10C2669M (4/07)
TIMELINE SYNCHRONIZATION IN QUICK SEARCH
The cursor in the Quick Search display now tracks with the video. You can move the cursor to any point on the timeline to instantly play back
video from that time.
Figure 6. Quick Search
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
10C1695M (8/06)
Before You Begin
About the DVR5100
The DVR5100 Series digital video recorder (DVR) is stand-alone or Endura-enabled, high-performance 4, 8, or 16 channel DVR. The DVR5100
combines superior forensic functions, easy-to-use interfaces, and video recording performance previously reserved for extremely high-end
systems. Digital video recorders designed for forensic applications must record video at high resolutions to capture exceptional detail and quality
required for investigative work. The DVR5100 captures video at up to 704 x 480 pixels (NTSC) or 704 x 576 pixels (PAL) at 30 ips (NTSC) or 25 ips
(PAL), providing the investigator with essential details.
The DVR5100’s remarkable performance is enhanced by the use of the EnduraStor™ storage optimization technology. EnduraStor allows video
recorded at higher frame rates to be reduced to 2 ips after a predetermined period of time, saving valuable hard disk drive space. EnduraStor,
combined with powerful motion detection capabilities and programmable recording schedules, allows the user to customize the performance of
the DVR5100 and optimize the required storage capacity.
A user-supplied USB keyboard can be connected to a DVR5100 USB port to configure the DVR5100 settings quickly and easily. Convenient front
panel controls with integrated joystick, jog, and shuttle, combined with an intuitive and simple graphical user interface (GUI), make using the
DVR easy and effortless. The front panel controls allow operation of Pelco PTZ cameras through Coaxitron
single-button export feature simplifies the exporting of video.
Flexible view options allow users to optimize the DVR for their particular application requirements. Video can be displayed on NTSC/PAL
composite, NTSC/PAL S-video, or VGA monitors. The main monitor can display one, four, nine, or sixteen images. Live and playback video can be
combined on the same screen. In addition, a programmable spot monitor provides a sequencing display on a composite monitor.
The DVR5100 uses Internet Protocol-based networking for remote accessibility and control of the DVR. All connections are made over a secure
and encrypted VPN session. For local area networks, the DVR5100’s 1 gigabit network port supports its impressive performance.
®
, D, or P protocol. An innovative
With a maximum recording speed of 30 images (NTSC) or 25 images (PAL) per camera per second at 4CIF resolution, the DVR5100 shatters
previous performance marks and establishes the best value in the industry for forensic digital video recorders. The combination of enterprise
class recording capabilities, ample internal storage, remote accessibility, and the reliability and assurance found in Pelco products makes this the
ideal DVR for unmanaged video surveillance applications typical of the retail, banking, education, and medical industries.
The DVR5100 can operate as a stand-alone or networked device. If the DVR5100 is going to be included in an existing network, always include
your network administrator when planning and installing the DVR5100.
PARTS LIST
Qty Description
1Pelco DVR5100 Series DVR
1Rack-mounting kit:
10 Cage nuts (for use with square-hole racks)
2Terminal blocks (each) for alarms and relays
3Power cables (1 USA standard, 1 European standard, and 1 UK standard)
2Product identification labels (attached to unit)
1DVR5100 Quick Start Installation Guide
1DVR5100 Installation manual
1DVR5100 Operation manual (on resource CD)
1DVR5100 Control Pad Quick Reference Guide
1DVR5100 Recovery Instructions
1Important Safety Instructions
1Resource CD
1Recovery DVD
2 Chassis mounting brackets with handles and thumb screws
8 Screws, 10-32 x 0.25-inch, Phillips, pan head (4 for each bracket)
2 Adjustable support rail sets (each set includes 1 front-mounting rail and 1 rear-mounting rail)
6 Screws, 8-32 x 0.375-inch, Phillips, truss head
4 Screws, 10-32 x 0.5-inch, Phillips, flat head (2 for each front-mounting rail)
4 Screws, 10-32 x 0.75-inch, Phillips, pan head (2 for each rear-mounting rail)
C1695M (8/06)11
PACKAGE CONTENTS
The following diagrams show the contents of the two boxes. When installing the DVR5100 Operation manual, refer to these diagrams.
Product serial number labels help Pelco’s Product Support identify your system and its factory configuration in the event that your DVR5100
Operation manual or its components require service.
Extra labels citing your product’s serial number are attached to your DVR5100. One label is attached to the bottom of the unit. A second label is
attached to the front panel of the unit.
Because rack mounting and other installation options may obscure the factory-applied labels, a third label is provided for you to attach to your
product documentation or another product location that will not be obscured by installation. To use this label:
1. Locate the small label attached to the outside of the front panel with a yellow sticker that reads “Extra serial number label: remove prior to
installation.”
2. Remove the yellow sticker.
3. Peel away the backing of the small white label and attach it to this Installation manual, other product documentation, or an unobscured
product location.
PHILLIPS PAN
HEAD SCREW,
10-32 X 0.75-INCH
4 EA.
CAGE NUT,
10-32
10 EA.
03267-39-0020
SN
EXTRA PRODUCT SERIAL NUMBER LABEL
Figure 4. Extra Product Serial Number Label
C1695M (8/06)13
Hardware Installation
Equipment Placement and Rack Mounting
The DVR5100 can be placed on a flat surface, such as a desktop, or mounted in an equipment rack.
DESKTOP MOUNTING
WARNING: Do not place the DVR5100 unit on its side; in this position, the unit is likely to fall over and may cause equipment damage or
personal injury.
To mount the DVR5100 on a desktop:
1. To prevent surface damage, be sure that the rubber feet are securely installed on the four corners of the bottom of the unit.
2. Remove the two chassis brackets (if attached) from the sides of the unit, using a Phillips screwdriver to remove the eight 10-32 x 0.25-inch
Phillips pan head screws (four per bracket). Save the brackets and screws for possible future use.
3. Position the unit to allow for cable and power cord clearance at the rear of the unit. Be sure that the air flow around the unit is not
obstructed.
(4) SCREWS
PER BRACKET,
10.32 X 0.25-INCH
PHILLIPS PAN HEAD
CHASSIS
BRACKET
RACK MOUNTING
The DVR5100 mounts into an industry-standard 19-inch (48 cm) equipment rack. The DVR5100 occupies two rack units (3.5 inches or 8.9 cm) of
vertical rack space. The hardware necessary to mount the DVR5100 into a rack is supplied with the unit.
•Rack column depth: 20 to 30 inches (50.8 to 76.2 cm).
•Column mounting hole provisions: 10-32 UNF-2B threaded holes or square window holes on front and rear columns.
•Door systems (optional): Front doors must have at least 2 inches (5.1 cm) between the DVR5100 front bezel and the inside of the door.
Rear doors may be used only on rack columns that are more than 26 inches (66.0 cm) deep.
WARNING: Slots and openings in the cabinet provide ventilation to prevent the unit from overheating. Do not block these openings.
Never place the unit near or over a radiator or heat register. When placing the unit in a built-in installation, such as a rack, be sure to
provide proper ventilation. Allow at least one rack unit (1.75 inches or 4.44 cm) of spacing between units
RUBBER FEET
(4) SCREWS,
8-32 X 0.25-INCH
PHILLIPS PAN HEAD
Figure 5. Chassis Brackets and Rubber Feet
14C1695M (8/06)
NOTE: Figure 6 identifies each piece of hardware for this procedure.
To install the DVR5100 in a rack:
1. If chassis mounting brackets are not attached: Attach one mounting bracket to each side of the DVR5100. Use four 10-32 x 0.25-inch
Phillips pan head screws for each bracket. Attach the brackets so that the tapered ends are positioned toward the rear of the DVR5100.
Refer to Figure 5.
2. Remove the four rubber feet from the underside of the unit if they are attached. Save the rubber feet and screws for possible future use.
3. Attach one front-mount rail to one rear-mount rail. Make sure the rails are mounted back to back, as shown in Figure 6. Use three
8-32 x 0.375-inch Phillips truss head screws in any of the available holes. Leave the screws loose until step 8.
(3) SCREWS, 8-32 X 0.375
PHILLIPS TRUSS HEAD
Figure 6. Assembling a Support Rail
4. Repeat step 3 for the other rail set.
5. If installing unit into a square-hole rack: Insert 10 cage nuts into the square-hole rack as shown in Figure 7.
CAGE NUT
Figure 7. Inserting Cage Nuts
C1695M (8/06)15
6. Attach one support rail assembly to the equipment rack in the desired location (refer to Figure 8).
NOTE: The support rail assemblies are identical and may be used on either the right or left side of the rack.
a.Position the ear of the front-mount rail against the front of the equipment rack. Align the top and bottom holes in the ear of the rail
with the threaded holes (or cage nuts) in the rack.
b.Using two 10-32 x 0.5-inch Phillips flat head screws, attach the ear of the rail to the front of the rack. Insert the screws from the
outside of the rack, pointing rearward.
c.Adjust the rails to the correct depth of the equipment rack by sliding the rear-mount rail to the back of the equipment rack.
d.Position the ear of the rear-mount rail against the rear exterior of the equipment rack. Align the top and bottom holes in the ear of the
rail section with the threaded holes (or cage nuts) in the equipment rack.
e.Using two 10-32 x 0.75-inch Phillips pan head screws, attach the ear of the rail to the rear of the rack. Insert the screws from the
outside of the rack, pointing forward.
RACK FRONTRACK REAR
(4) SCREWS,
10-32 X 0.5-INCH
PHILLIPS FLAT HEAD
FRONT-RAILMOUNT
(4) SCREWS,
10-32 X 0.75-INCH
PHILLIPS PAN HEAD
REAR-RAILMOUNT
Figure 8. Attaching Support Rails
16C1695M (8/06)
7. Repeat step 6 for the second support rail assembly.
8. Tighten the 8-32 x 0.375-inch Phillips truss head screws that were attached to the front- and rear-mount rails in steps 3 and 4.
9. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit
into place. The unit should slide in and out of the rack easily. Refer to Figure 9.
WARNING: When sliding out the DVR5100, be careful not to let the unit fall out of the rack.
Figure 9. Mounting the DVR5100 into the Rack
10. After the unit is in place, tighten the two thumbscrews to secure the unit to the rack.
THUMBSCREW
THUMBSCREW
Figure 10. Tightening the Thumbscrews
C1695M (8/06)17
Connections
Familiarize yourself with the DVR5100 back panel before connecting any equipment to the unit. The following figure shows the DVR5100 back
panel for the 16-channel DVR. The DVR5100 is available as 4, 8, or 16-channel DVR. In this case, the back panel of the 4 and 8 channel units is a
little different.
The following table describes the DVR5100 back panel.
ItemPartDescription
Audio Inputs 1 and 2Audio inputs are assigned as follows:
Video Inputs 1–8Camera inputs 1–8 for a 16 channel DVR. The 4 channel DVR provides camera inputs 1–4 and an
Looping Video Outputs 1–8One looping video output is provided for each camera input.
AC Power ConnectorPower.
Relays 1–2One relay is provided for every 4 channels:
Figure 11. DVR5100 Rear Panel
Table A. Parts of the DVR5100 Back Panel
•Two audio inputs (1 and 2 for video input 1 and 2, respectively) are provided for a 4 and
8-channel DVR.
•Four audio inputs (1 and 2 for video input 1 and 2 and audio input 3 and 4 for video input 9
and 10, respectively) are provided for a 16-channel DVR.
8 channel DVR provides camera inputs 1–8. The rear panel layout might be different for the 4 and
8 channel DVR.
•One relay output is provided for a 4-channel DVR.
•Two relay outputs (1, 2 for channels 1 and 2, respectively) are provided for an 8-channel DVR.
•Four relay outputs (1, 2 for channels 1 and 2, respectively and 3, 4 for channel 9 and 10,
respectively) are provided for a16-channel DVR.
Relays are numbered from top to bottom.
Alarms 1–4 and 5–8One programmable alarm input is provided for each video input. Alarm inputs for video input 1–8
are organized as follows:
•Alarm input 1–4 is for video 1–4
•Alarm input 5–8 for video input 5–8
Alarms are numberd from the top left through the bottom right. The rear panel layout might be
different for the 4 and 8 channel DVR.
18C1695M (8/06)
Loading...
+ 104 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.