Pelco C2647M-B User Manual

INSTALLATION

DVR5100 Series Hybrid Video Recorder

Hard Disk Drive Replacement Kit
C2647M-B (10/09)

Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the Hard Disk Drive Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing a Hard Disk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Reassembling the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

List of Illustrations

1 Removing the Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Removing the Chassis Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Locating the Hard Disk Drive Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Loosening the Hard Disk Drive Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Removing the Hard Disk Drive Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6 Removing the Power and Data Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 Removing the Screws from the Hard Disk Drive in the Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8 Removing the Hard Disk Drive from the Cage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 Inserting the Hard Disk Drive Cage into the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10 Securing the Hard Disk Drive to the Chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 C2647M-B (10/09)

Introduction

This manual describes how to install a replacement hard disk drive or upgrade to a higher capacity hard disk drive in a DVR5100 Series hybrid video recorder (HVR).

MODELS

The following models are available for DVR5100 Series hard disk drive replacements or upgrades:
Replacement Kits Contents
DVR5KRP-250 One 250 GB hard disk drive DVR5KRP-500 One 500 GB hard disk drive DVR5KRP-1000 One 1 TB hard disk drive DVR5KRP-1500 One 1.5 TB hard disk drive DVR5KRP-2000 One 2 TB hard disk drive

PARTS AND TOOLS

WARNING: This kit includes one Pelco-certified hard disk drive. Using any other hard disk drive with the DVR5100
voids the manufacturer’s warranty.
Before proceeding, make sure that your replacement kit contains the following parts:
Qty Description
1 Pelco-certified hard disk drives: 250 GB, 500 GB, 1 TB, 1.5 TB, or 2 TB. (Refer to the model number to confirm the
quantity and capacity of the included drives.) 4 6-32 x 3/16 Phillips pan head screws 1 Electrostatic discharge (ESD) disposable wrist strap 1 DVR5100 Series Hard Disk Drive Replacement Kit manual
To install the replacement drive, you will also need a Phillips screwdriver (not supplied).
C2647M-B (10/09) 3

Installing the Hard Disk Drive Replacement Kit

GETTING STARTED

1. Familiarize yourself with the instructions in this document.
2. Verify that you have all the necessary parts and tools (refer to Parts and Tools on page 3).
3. If possible, export all essential video before you install a new hard disk drive. If your unit contains two hard disk drives, export all essential video on both drives. Follow the instructions for exporting video in the DVR5100 Hybrid Video Recorder Operation manual.

PREPARING THE UNIT

1. Shut down the DVR5100 unit as follows. If you are already logged on, use the on-screen menus to log off and proceed with the following steps. For security purposes, the unit can only be shut down with Administrator-level permissions.
a. From the Login screen, select the administrator user ID, and then enter the appropriate administrative
password.
b. Select Shut Down to power off the system. The DVR5100 saves all configuration information and recorded video
and then shuts down.
2. Remove the power cord from the back of the DVR5100.
3. Disconnect any cables or connections that may restrict access or interfere with the removal of the unit.
4. If mounted in a rack, unscrew the fasteners that secure the unit in the rack, and then carefully slide the unit out of the rack. Two people may be required for this step.
5. Place the DVR5100 on a flat surface with ample workspace. Make sure the area provides full access to the DVR5100 internal components.
WARNINGS:
• Make sure the unit is turned off and you are wearing a properly grounded ESD wrist strap before attempting to
open the chassis cover.
• The chassis assembly includes parts with sharp edges. To avoid injury, use caution when working in and around
the DVR5100 chassis and components.
4 C2647M-B (10/09)
Loading...
+ 8 hidden pages