Pelco C2407M-G User Manual

®

Installation/Operation

100 Series Camclosure

®

Integrated Camera System

C2407M-G (5/03)

Pelco

• 3500 Pelco Way • Clovis, CA 93612-5699 USA •

In North America and Canada:

International Customers:

Tel [phone] • FAX [phone]

Tel [phone] • FAX [phone]

www.pelco.com

[ 2 ] Pelco Manual C2407M-G (5/03)

CONTENTS

Section Page

IMPORTANT SAFEGUARDS AND WARNINGS ..................................................................................... 4

DESCRIPTION ........................................................................................................................................ 4

INSTALLATION ........................................................................................................................................ 4

INSTALL BASE .............................................................................................................................. 4

MOUNTING DIRECTLY TO WALL OR CEILING ................................................................. 4

MOUNTING DIRECTLY TO CONCRETE WALL OR CEILING ............................................ 5

MOUNTING TO A 4S ELECTRICAL BOX ............................................................................ 5

MOUNTING TO A PLASTER RING ..................................................................................... 5

CONNECT VIDEO AND POWER .................................................................................................. 5

INSTALL CAMERA ........................................................................................................................ 6

INSTALL DOME AND TRIM RING ................................................................................................. 7

ADJUSTMENTS (COLOR CAMERA ONLY) ........................................................................................... 7

VERTICAL PHASE (24 VAC OPERATION ONLY) ......................................................................... 7

AUTO IRIS LEVEL ADJUSTMENT ................................................................................................ 8

FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS .......................... 8

SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS .............................. 9

SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITHOUT AUTO IRIS ...................... 9

SWITCH SETTINGS FOR VARIFOCAL LENS ............................................................................. 10

SPECIFICATIONS .................................................................................................................................. 10

REGULATORY NOTICES ....................................................................................................................... 11

WARRANTY AND RETURN INFORMATION ......................................................................................... 12

Pelco Manual C2407M-G (5/03) [ 3 ]

IMPORTANT SAFEGUARDS AND WARNINGS

1. Installation and servicing should be done only by qualified service personnel and conform to all local
codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is
designed for indoor use only and must not be installed where exposed to rain and moisture.

3. Use only installation methods and materials capable of supporting four times the maximum specified
load.

4. Use stainless steel hardware to fasten the enclosure to outdoor surfaces.

5. To prevent damage from water leakage when installing an enclosure outdoors, apply sealant around
the bolt holes between the enclosure and mounting surface.

DESCRIPTION

The 100 Series Camclosure® Integrated Camera System is a surface-mount dome incorporating a
camera and lens package into a small, discreet, high-security enclosure designed for indoor/outdoor
areas that are subject to heavy vandalism.

INSTALLATION

1 Install Base

Mounting Directly to Wall or Ceiling

1. Cut a small hole in the ceiling or wall for
power and video wiring. Use the adapter
plate as a template.

2. Pull video and power wires into the base,
and attach the base to the wall or ceiling
(hardware not supplied). The electrical
opening in the base will accept a 3/4-inch
(1.91 cm) conduit fitting.

IMPORTANT

To maximize
tamper
resistance
when not
using the
side conduit
opening for wire
connections, verify that the
conduit plug and set screw are tight.

SET SCREW

CONDUIT
PLUG

MOUNTING
HARDWARE
(NOT SUPPLIED)

[ 4 ] Pelco Manual C2407M-G (5/03)

BASE

WALL OR
CEILING