Pelco MR5000, C226M User Manual

®

Installation/Operation

PCM5000
Light-Duty Camera Mount for the
MR5000 Series Public Viewing System

C226M (9/01)

01142

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • Pelco Online @ www.pelco.com

In North America and Canada: Tel [phone] • FAX [phone] • DataFAX [phone]

International Customers: Tel [phone] • FAX [phone] • DataFAX [phone]

PelcoEurope BV • Dillenburg Center, Dillenburgstraat 7C • 5652 AM Eindhoven • The Netherlands

Te l [phone] • FAX [phone]

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and conform to all local
codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is de­signed for indoor use only and it must not be installed where exposed to rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement be­tween line and exposed parts to verify the exposed parts have not been connected to line circuitry.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage consti­tuting a risk of electric shock is present within this
unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that there are important oper­ating and maintenance instructions in the literature
accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

[

]

2

Pelco Manual C226M (9/01)