Pelco C20-DN-6XC Specsheet

PRODUCT SPECIFICATION

C20-DN

(LENS NOT SUPPLIED WITH CAMERA)

camera solutions

C20-DN Series Analog Day/Night Camera

18 TO 32 VAC (REVISION A), 1/3-INCH CCD, 650 TVL, TRUE DAY/NIGHT (ICR)

Product Features

• 650 TV Lines

• High Sensitivity

• True Day/Night with Automatic or Manual Control

• 1/3-Inch Format CCD Imager

• Digital Signal Processing

• CS Lens Mount

• Autosensing DC Drive Auto Iris

• Automatic/Manual White Balance Settings for Difficult Lighting

Situations

• Selectable Automatic Gain Control

• Advanced Backlight Compensation

• Autosensing Power; 18 to 32 VAC/12 VDC with Internal

Synchronization (Revision A)

• 2D Digital Noise Reduction (DNR)

• Privacy Zones

• Motion Detection

• Built-in Unshielded Twisted Pair (UTP) Output

• Camera Titles

• Adaptive Tone Reproduction (ATR) to Compensate for Gradation of

Subjects to an Optimum Level

The C20-DN Series is Pelco’s digital true day/night CCD camera. Its
day/night technology provides outstanding performance over a wide
range of lighting conditions. The camera uses a removable infrared
(IR) cut filter to switch between color and black-white (B-W) modes
as environmental lighting conditions change and the need for
infrared sensitivity is realized.

The C20-DN Series is an ultra high resolution digital camera with
650 TVL of resolution and 0.13 lux minimum illumination. Camera
features include autosensing power, 18 to 32 VAC or 12 VDC with
internal synchronization (Revision A) and automatic gain control
(AGC). The C20-DN Series also includes automatic white balance
(AWB) for difficult lighting situations, digital noise reduction that
minimizes environment noise level, and backlight compensation
(BLC) that adjusts the picture to prevent objects from appearing dark
due to a strong backlight.

The C20-DN Series also features built-in analytical capabilities
including privacy zones, motion detection, and camera titles. These
features are easily set using the on-screen menus.

The convenient on-screen menus contain features that are not
typically found in a general purpose camera including area masking,
titling, pixel correction, and preset lighting profiles.

The C20-DN Series is quick and easy to install. The camera is also

®

featured in Pelco’s DomePak

and ImagePak® fixed camera dome/
enclosure packages. The optional C10-UM wall/ceiling/rail mount kit
offers easy installation in many nonenclosure applications, for all
models.

The C20-DN Series has a standard CS lens mount and can be used
with fixed, manual, or auto iris (DC drive) lenses. The iris is controlled
through a standard 4-pin square connector that is included on all
Pelco auto iris lenses.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4007 / NEW 4-30-14

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All oth er product names and

services are the property of their respect ive companies.

Product specifications and availability are subject to change without notice.

©Copyright 2014, Pelco, Inc. All rights reserved.

MODELS

C20-DN-6X 1/3-inch CCD high resolution day/night

camera, 18 to 32 VAC or 12 VDC, PAL format
(Revision A)

C20-DN-7X 1/3-inch CCD high resolution day/night

camera, 220 VAC, PAL format

GENERAL

Imaging Device Sony® 1/3-Inch EXview HAD CCD II™ 960H
Signal Processing Sony new digital signal processor, Effio-E
Day/Night Operation

Day Infrared (IR) cut filter
Night BK-7 glass, same optical displacement as day

mode
Picture Elements 976 (H) x 582 (V), approx. 570k
Sensing Area 8.33 mm (1/3 inch)

4.7 x 3.5 mm (3/16 x 1/8-inch)
Scanning System 625 lines, 2:1 interlace
Synchronization System Internal
Horizontal Resolution 650 TV lines
Auto Iris Lens Type DC drive
Sensitivity

Color 0.13 lux, f/1.2, 30 IRE

Mono 0.05 lux, f/1.2, 30 IRE
Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment)
Automatic Gain Control On/off 35 dB
Backlight Compensation Yes
White Balance ATW/push lock/manual/anti-CR/user2/

user/push
Color Correction With white balance
Gamma Selectable (ATR)
Video Output 1 Vp-p, 75 ohms
Auto White Balance Range 2,500° to 9,500°K
Noise Reduction (DNR) 2D
Privacy Zones Yes
Motion Detection Yes
Camera Titles Yes

ELECTRICAL

Power Requirement*

C20-DN-6X 18 to 32 VAC 50 Hz/12 VDC +10% to –15%

(Revision A)

C20-DN-7X 220 VAC +10% to –15%, 50 Hz

Power Consumption

C20-DN-6X 4 W
C20-DN-7X 5 W

Power Connector 2-pin terminal block with push lock, or line

cord on 220 VAC models
Video Connector BNC
Auto Iris Connector 4-pin connector (miniature square)
*Suggested installations (Revision A):

For outdoor environmental conditions from –30° to 50°C (–22° to 122°F),
use only an AC power supply source (18 to 32 VAC).

For indoor or outdoor applications with ambient temperatures of 0° to 50°C
(32° to 122°F), use 12 VDC power, or an AC power supply source
(18 to 32 VAC).

MECHANICAL

Lens Mount CS mount
Camera Mount 1/4-inch UNC-20 screw, top or bottom of

camera housing

ENVIRONMENTAL

Operating Temperature –10° to 50°C (14° to 122°F)
Storage Temperature –20° to 60°C (–4° to 140°F)

™

Operating Humidity 20% to 90%, noncondensing
Storage Humidity 20% to 90%, noncondensing

PHYSICAL

Dimensions (includes BNC) 108 x 60 x 55 mm

Weight (without lens)

C20-DN-6X 0.30 kg (0.66 lb)
C20-DN-7X 0.45 kg (0.99 lb)

Shipping Weight

C20-DN-6X 0.55 kg (1.21 lb)
C20-DN-7X 0.60 kg (1.32 lb)

(4.25" L x 2.36" W x 2.17" H)

CERTIFICATIONS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

RECOMMENDED MOUNTS

C10-UM C10 series universal wall/ceiling/rail

mount kit

RECOMMENDED POWER SUPPLIES

TF2000 Power supply for one camera, 20 VA
MCS Series Multiple camera power supply, indoor
WCS Series Single/multiple camera power supply,

outdoor

RECOMMENDED LENSES

13VA/13VD Series Varifocal lenses, 1/3-inch format;

13ZD Series Motorized zoom lenses, 1/3-inch format (auto

13VA (manual iris); 13VD (auto iris, DD)

iris, DD)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community