Pelco C1925-PP, C1906-PP, C1925, C930M-E, C19125 User Manual 2

®

C1906, C1925, C19125,

C1906/PP and C1925/PP

Pre-wired Interconnecting

Inverting Cables

Installation/Operation Manual

C930M-E (12/95)

Amended 1/96

PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • [phone] • [phone]

FAX [phone] or [phone]

TABLE OF CONTENTS

Section Page

1.0 WARNINGS ........................................................................................................................................1

2.0 SCOPE ............................................................................................................................................... 2

3.0 DESCRIPTION ................................................................................................................................... 2

3.1 MODEL NUMBERS .....................................................................................................................2

4.0 SPECIFICATIONS .............................................................................................................................. 2

5.0 INSTALLATION .................................................................................................................................. 2

6.0 OPERATION ...................................................................................................................................... 2

5.1 SYSTEM TEST ............................................................................................................................2

7.0 TROUBLE SHOOTING GUIDELINES ............................................................................................... 3

8.0 SCHEMATICS ....................................................................................................................................3

9.0 WARRANTY AND RETURN INFORMATION .....................................................................................6

LIST OF ILLUSTRATIONS

Figure Page

1 C1906, C1925, and C19125 Wiring Diagram ..................................................................................... 3

2 C1906/PP and C1925/PP Wiring Diagram .........................................................................................4

3 C1906/PP and C1915/PP Wiring Diagram For Use with Upright Pan/Tilts Only ................................5

REVISION HISTORY

Manual # Date Comments

C930M No date. Original version.

C930M 8/90 Rev. A. Revised to include preset models C1906/PP and C1925/PP.

C930M 4/91 Rev. B. Figure 2 revised; Figure 2A added as an addendum.

C930M-C 1/95 Figures 2 and 2A (now Figure 3) revised to show correct pinouts for

pins 17 and 18 on the 28-pin connector (pan/tilt functions). Also, Fig­ures 1-3 revised to show new wire colors (see pins 5, 8, 11 and 13 on
the 14- or 28-pin connector).

C930M-D 9/95 Rev. D. Revised wire colors for pins 11 and 13 on Figures 1-3.

C930M-E 12/95 Rev. E. Revised Figure 2, pin 17 and 18 colors and functions.

®Pelco and the Pelco logo are registered trademarks of Pelco.
©Copyright 1995, Pelco. All rights reserved.

8 Pelco Manual C930M-E (12/95)

ii

INSTALLATION AND OPERATION MANUAL
MODELS C1906, C1925, C19125, C1906/PP,
AND C1925/PP
PRE-WIRED INTERCONNECTING
INVERTING CABLES

1.0 WARNINGS

1. Installation and Servicing should only be done
by Qualified Service Personnel.

2. The installation shall be done in accordance
with all local and national electrical and me­chanical codes utilizing only approved mate­rials.

3. Unless the cable is specifically marked “WA”
(for use in wet locations), the cable is designed
for indoor use only and it must not be installed
where exposed to rain and moisture.

2.0 SCOPE

The information within this manual covers the installa­tion and operation of the C1906, C1925, C19125,
C1906/PP, and C1925/PP pre-wired interconnecting
inverting cables.

Please thoroughly familiarize yourself with the infor­mation in this manual prior to installation and opera­tion.

3.0 DESCRIPTION

The C1906, C1906/PP, C1925, C1925/PP and C19125
are pre-wired cables designed for interconnecting
Pelco’s Coaxitron® receiver/driver with various Pelco
domes or any inverted PT180-24P/PT280-24P pan/tilt
application as listed below.

C1906, C1925, C19125

Domes: ED2820, ED2820-3, ED2820-SL,

ED2920, ED2920-SL,
SB2800, SB2800-2, SB2800-SL,
SB2800-SL-2, SB2801
SS3000, SS3002

Pan/Tilts: PT180-24P, PT180-24SL,

PT280-24P, PT280-24SL

C1906/PP, C1925/PP

Domes: ED2820-PP, ED2820SL/PP,

ED2820-3SL/PP, SB2800/PP,
SB2800-SL/PP

Pan/Tilts: PT180-24P/PP,

PT280-24P/PP, PT280-24SL/PP

3.1 MODEL NUMBERS

C1906 6 ft (1.83 m), pre-wired intercon-

necting inverting cable. (UL)

C1925 25 ft (7.62 m), pre-wired intercon-

necting inverting cable. (UL)

C19125 125 ft (38.1 m), pre-wired inter-

connecting inverting cable. (UL)

C1906/PP 6 ft (1.83 m), same as C1906 but

for PP models. (UL)

C1925/PP 25 ft (7.62 m), same as C1925 but

for PP models. (UL)

Pelco Manual C930M-E (12/95) 1