Pelco C1917M User Manual
®
CC4700-2
1/2-Inch
Color Camera
Installation/
Operation Manual
C1917M (12/97)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
CONTENTS
Section Page
1.0 GENERAL ..................................................................................................1
1.1 IMPORTANT SAFEGUARDS AND WARNINGS ...............................1
1.2 REGULA TORY NOTICES.................................................................. 2
1.3 UNP ACKING INSTRUCTIONS ..........................................................2
1.4 RECOMMENDED TOOLS .................................................................2
2.0 DESCRIPTION ..........................................................................................3
3.0 LOCA TION OF PARTS AND CONTROLS .................................................4
4.0 INSTALLATION ..........................................................................................5
4.1 ADJUSTMENTS ...............................................................................11
4.1.1 White Balance........................................................................11
4.1.2 Vertical Phase........................................................................12
4.1.3 Back Focus ............................................................................12
5.0 OPERA TION .............................................................................................14
6.0 TROUBLESHOOTING ..............................................................................15
7.0 MAINTENANCE ........................................................................................16
8.0 SPECIFICATIONS......................................................................................17
9.0 WARRANTY AND RETURN INFORMATION ...........................................20
ii
22 Pelco Manual C1917M (12/97)
LIST OF ILLUSTRATIONS
Figure Page
1 Location of Parts and Controls ..........................................................4
2 Removal of Camera Cover.................................................................5
3 Internal Switch Settings ..................................................................... 5
4 Lens Mount ........................................................................................ 6
5 Auto-Iris Lens Plug Assembly ............................................................6
6 Lens Installation ................................................................................. 7
7 Camera Mounting Screw ...................................................................7
8 Power and Video Connections ...........................................................8
9 White Balance Setting ......................................................................11
10 CC4700-2 Dimension Drawing .........................................................18
LIST OF TABLES
Table Page
A 24 VAC W iring Distances ...................................................................9
B Video Coaxial Cable Wiring Distances .............................................10
REVISION HISTORY
Manual # Date Comments
C1917M 12/97 Original version.
Pelco Manual C1917M (12/97) 23
iii
(This page intentionally left blank.)
iv
24 Pelco Manual C1917M (12/97)
1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2. Only use replacement parts recommended by Pelco.
3. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
CAUTION:
RISK OF
ELECTRIC SHOCK.
DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-
SERVICEABLE P ARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
Pelco Manual C1917M (12/97) 1
1.2 REGULATORY NOTICES
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Y ou are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
This device requires shielded interface cables to comply with FCC emission limits.
1.3 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following parts are supplied:
1 Camera
1 4-pin plug for lens cable
1 Installation/Operation Manual (C1917M)
Be sure to save the shipping carton and any inserts. They are the safest material in
which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replacement. (International customers fax 1-559-348-1120 for authorization and instructions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.4 RECOMMENDED TOOLS
Pelco does not supply basic tools needed for the installation process. The following
tools are recommended:
Small flat and Phillips screwdrivers
Coaxial cable stripper
BNC crimp tool
If you will install an auto-iris lens:
Soldering iron
Wire cutter
Wire stripper
2 Pelco Manual C1917M (12/97)
2.0 DESCRIPTION
The CC4700-2 color video camera has the following features:
Imager
The camera uses a 1/2-inch CCD (Charge Coupled Device).
High Sensitivity
The camera gives a clear picture even under very gloomy conditions.
CCD Iris Function
Even when a manual iris lens is fitted, the sensitivity is automatically adjusted according to the incident light level. This keeps the video signal at a suitable level.
Electronic Shutter Function
Eight shutter speeds are available for various shooting conditions.
Lockable to AC power Frequency
The vertical drive frequency of the camera can be locked to the AC power frequency (60 Hz) instead of the internal clock of the camera (59.94 Hz), avoiding
picture roll during camera switching operations.
Auto-Iris Lenses
A C-mount auto-iris lens can be used by connecting the lens cable to the camera
with the plug that is supplied.
High Resolution
The number of CCD picture elements (about 380,000) is sufficient to ensure high
resolution.
Automatic Adjustment of White Balance
The automatic adjustment mode adjusts the white balance according to a value
stored in memory; alternatively, the automatic tracing mode continuously responds
to the lighting conditions to adjust the white balance. Thus a picture with an appropriate color balance is always obtained.
Pelco Manual C1917M (12/97) 3
3.0 LOCATION OF PARTS AND CONTROLS
MOUNTING
LENS MOUNT
(C-MOUNT)
SCREW
HOLES
BACK FOCUS
ADJUSTMENT
SCREW
LENS CONNECTOR (4-PIN)
SYNC
SWITCH
WHITE
BALANCE
SWITCH
POWER
SWITCH
LOCK
BUTTON
V-PHASE BUTTON
POWER
INDICATOR
VIDEO OUT
CONNECTOR
POWER
TERMINALS
(24 VA C)
GROUND
TERMINAL
Figure 1. Location of Parts and Controls
4 Pelco Manual C1917M (12/97)
Loading...