Pelco C1909M User Manual

®

PMC9A

High-Resolution Color

Monitor

Installation/

Operation Manual

C1909M (4/01)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com

In North America and Canada: Tel [phone] • FAX [phone]

International Customers: Tel [phone] • FAX [phone]

CONTENTS

LIST OF ILLUSTRATIONS

Section Page

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3

DESCRIPTION ................................................................................................................... 4

INSTALLATION ..................................................................................................................4

OPERATION ......................................................................................................................6

FRONT PANEL ADJUSTMENTS ...............................................................................6

MAINTENANCE .................................................................................................................6

SPECIFICATIONS.............................................................................................................. 7

WARRANTY AND RETURN INFORMATION..................................................................... 8

Figure Page

1 Back Panel Layout ............................................................................................. 4

2 Looping Operation – One Monitor with External Video Equipment .................... 5

3 Looping Operation – Maximum of Three Monitors with

External Video Equipment..................................................................................5

4 Front Panel Controls .......................................................................................... 6

LIST OF TABLES

Table Page

AVideo Coaxial Cable Requirements ................................................................... 5

2 Pelco Manual C1909M (4/01)

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Operate this unit only from the type of power source indicated on the label.

2. Do not block or cover ventilation openings on the back or bottom of the monitor
cabinet.

3. Do not place this monitor near a radiator or heating vent.

4. Do not push objects of any kind through cabinet openings. This may result in fire or
electrical shock.

5. Before adding attachments always ask a service technician to perform routine safety
tests to determine that equipment is in safe operating condition. Ground potential tests
should be part of the routine safety check made by the service technician.

6. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure
personnel or damage equipment.

7. Route power cords so that they cannot be walked upon or tripped over. Do not allow
anything to rest on the power cord.

8. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not
spill liquid of any kind on the unit.

9. Unplug the power cord from the unit before cleaning the display. Use only a damp
cloth. Do not use alcohol, spirits, or ammonia to clean the display. DO NOT AT-

TEMPT TO CLEAN THE INTERIOR OF THIS UNIT-THIS ACTION MUST
BE PERFORMED BY THE SERVICE TECHNICIAN AS REQUIRED DUR­ING NORMAL MAINTENANCE.

10. Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER
BY UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DAN­GEROUS VOLTAGES OR OTHER HAZARDS.

11. Unplug the unit immediately and notify the service technician.
A. If liquid has been spilled into the display or the display has been exposed to rain

or water.
B. If the unit has been dropped or the cabinet damaged.
C. If fuses continue to blow.
D. If the power cord is damaged or frayed.
E. If a distinct change from normal operation is apparent.

12. A CCC-approved power cord must be used to power this equipment when used in
China.

When replacement parts are required, be sure that the service technician uses components
specified by the manufacturer which have the same characteristics as the original parts.

UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL
SHOCK OR OTHER HAZARDS.

Upon completion of any service or repairs, ask the technician to perform safety checks to
determine that the equipment is in safe operating condition.

WARNING:

SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS
OF THIS MONITOR. DO NOT OPEN THE COVERS UNDER ANY CIRCUM­STANCES, THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous volt­age constituting a risk of electric shock is
present within this unit.

This symbol indicates that there are impor­tant operating and maintenance instructions
in the literature accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Pelco Manual C1909M (4/01) 3