Pelco C1628M-F User Manual
QUICK START GUIDE
Endura® Workstation with
WS5000 Advanced System Software
C1628M-F (10/07)
About This Guide
Thank you for purchasing Pelco’s Endura® workstation with WS5000 advanced system software. This guide provides basic instructions on how to
connect your Endura workstation, start the WS5000 advanced system software, monitor live video, and work with recorded video.
For detailed instructions on installing, programming, and using your Endura workstation, refer to the installation and operation manuals included
with your unit.
Connecting the Equipment
Refer to Figure 1 as you make the front and back panel connections required to operate this unit:
1. Connect video output (DVI). To connect a VGA monitor to this output, use a DVI-to-VGA adapter plug supplied with the Endura workstation.
2. Connect audio input and output.
3. Connect Cat5e or better network cable to the 1 gigabit RJ-45 network port and to the Endura network.
4. Connect keyboard and mouse to USB ports (front or back panel).
5. Connect power cable to the power connector and a power source.
6. Turn on power.
7. Check indicators.
POWER CONNECTOR
USB 2.0 PORTS
NETWORK
CONNECTOR (RJ-45)
DIGITAL VIDEO (DVI)
CONNECTORS
MICROPHONE IN
AUDIO OUT
AUDIO IN
POWER BUTTON
DVD/CD
POWER INDICATOR
PRODUCT SERIAL STICKERNUMBER
DRIVE
CPU ACTIVITY
NETWORK
ACTIVITY
03267-39-0020
SN
CONFIGURATION/
RESET BUTTON
USB 2.0 PORT
NETWORK STATUS
UNIT STATUS
Figure 1. Connecting the Endura Workstation
2 C1628M-F (10/07)
Logging On and Off
Before starting, ensure that the Endura workstation is configured to work on an Endura network. For information on network requirements,
consult the Endura Network Design Guide.
To start the application, double-click the Endura icon on the desktop. A login dialog box appears. If the system manager (SM5000) is online,
enabling the authentication of users and devices, a small key icon appears in the lower right-hand corner.
Logging on loads your user profile, including language preferences. When you start the WS5000 application, the Login screen automatically
appears. You cannot access the application if you do not have a valid user name and password.
When logging on to an Endura network that includes an SM5000, the default user name is admin and the default password is admin. To keep
your system secure, be sure to change the default passwords. Record your new login information in a secure location.
To log on:
1. Type your Endura user name.
2. Type your password.
3. Click OK. If the OK button is not available, you must synchronize with the
system manager. To do so, click the Synchronize button on the Login
screen. A message displays after the system manager has been located, and
the OK button will be available for you to log on to the system.
NOTE: User names and passwords are case-sensitive.
After you log on to the system, the main screen appears, and the devices on your network start to load. Depending on the size of your network,
the process may take a few minutes. Check the lower-left corner of the application screen to see the status of the device-loading process.
NOTE: Every Endura user may be assigned one or more roles; each role has permission to access a particular set of Endura devices and WS5000
features. If, when you log in, you do not see a device or system feature you expect to see, contact the system administrator to find out whether
your permissions should be edited to expand your access.
To exit the program, select Exit or Logout from the File menu. The system logs you off, closes the application, and displays the desktop.
Figure 2. Login Dialog Box
Main Screen
This section offers an overview of the main screen. Refer to the Quick Reference on page 5 section for basic instructions on how to use the
system, including how to select a camera, control PTZ, respond to alarms, and play back recorded video. For more detailed explanations, refer to
the operation manual for the WS5000 advanced system software.
Figure 3. WS5000 Main Screen
C1628M-F (10/07) 3
Loading...