PRODUCT SPECIFICATION
AUD-1 Audio Accessory
EXTERNAL AUDIO ADAPTER
Product Features
• G.711 Compression
• Bidirectional Full-Duplex Audio
• Echo Cancellation
• Connects Directly to the Accessory Port
• Easy Setup
• Compact Size
• Compatible with Spectra
Camera Models Without Built-in Audio
®
HD Series Dome Systems and Sarix™
camera solutions
The AUD-1 audio accessory is an external adapter that connects
directly to the accessory port of compatible Pelco devices. The
AUD-1 is compatible with Spectra
™
camera models that do not have built-in audio.
Sarix
The AUD-1 audio accessory is designed to work with microphones
that provide a line-level output (+4 dBu). The AUD-1 provides 12 VDC
for microphones that require it, but a preamplifier is required for
microphones that require more power. The AUD-1 encodes audio
from the microphone into a digital G.711 format. The audio can be
streamed with the video to be played back and recorded at the
headend. The AUD-1 can also receive the G.711 digital audio from
the headend and convert it to an analog signal to be played through a
speaker.
The AUD-1 audio accessory can be used in conjunction with the
ALM-1 alarm accessory. If the Pelco device has only one accessory
port, a USB hub is required.
®
HD Series dome systems and all
TECHNICAL SPECIFICATIONS
MODEL
AUD-1 External audio accessory
GENERAL
Streaming Bidirectional: full or half duplex
Input/Output Terminal block, analog for microphone and
Compression G.711
Sampling Rate 8 kHz
Bit Rate 64 kbps (8 kHz)
ELECTRICAL
Power Input 5 VDC powered from USB
MECHANICAL
Audio Input (microphone) UTP 600 ohm mono, 4X terminal block (screw
Audio Output (speaker) UTP 600 ohm mono, 2X terminal block (screw
Connector USB 2.0 ‘A’ male
ENVIRONMENTAL
Operating Temperature 0° to 60°C (32° to 140°F)
Storage Temperature –20° to 60°C (–4° to 140°F)
speaker; 600-ohm differential;
1 Vp-p maximum signal level
connection), balanced line input, 12 VDC
power source
connection), balanced line output
PHYSICAL
Dimension 62.2 x 29.2 x 16.0 mm
Unit Weight 0.02 kg (0.04 lb)
Shipping Weight 0.45 kg (1.0 lb)
(2.45" L x 1.15" W x 0.63" H)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class A
• FCC, Class A
SUPPLIED ACCESSORIES
USB Extension Cable Female ‘A’ to male ‘mini-B’
USB Extension Cable Female ‘A’ to custom right-angle
male ‘mini-B’
SUPPORTED THIRD-PARTY MICROPHONES*
Manufacturer Microphones
Verifact A, B, C, E, L-DT and K
AOPSP-PB-F/S
Louroe
ETC SM1 Series
*While many other microphones are compatible, these have been
tested with the AUD-1 and are officially supported.
†
Louroe AOP Series microphones may require an AOP-XD interface transceiver.
AOP-SP-CF/CS
AOP-SP-WF/WS
TLMC-W
†
†