Peiker acustic WMI2W167 Users Manual
________________________________________________________________________________________________________________________________
Page 1
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
WMI 2
(wireless module interface)
User manual
Valeo Peiker product IDs:
WMI2-W167 2609-090-203-51 (trucks basic)
WMI2-W205 2609-090-303-51 (W205)
WMI2-W205-M1 2609-090-353-51 (W205 w/o)
WMI2-W167-M1 2609-090-403-51 (W167)
WMI2-W167-M2 2609-090-453-51 (W167 w/o)
WMI2-W167-M3 2609-090-553-51 (W167 Fd)
Revision: 1.5
Date: Jan 2018
________________________________________________________________________________________________________________________________
Page 2
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
Revision History
Date
Revision
Name
Comment
13.12.2017
1.0
Uha
Initial document
15.12.2017
1.2
Uha
19.12.2017
1.3
SSa
Update serial numbers
19.12.2017
1.4
SSa
Update point 3 & 4
11.1.2018
1.5
Uha
Update point 2.3.1
________________________________________________________________________________________________________________________________
Page 3
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
Inhalt
1. Introduction ............................................................................................................................................ 4
1.1 Scope ............................................................................................................................................... 4
1.2 Audience ......................................................................................................................................... 4
1.3 Contact information, Support .......................................................................................................... 4
2. Product Overview ................................................................................................................................... 5
2.1 Product Variants .............................................................................................................................. 5
2.2 Technologies ................................................................................................................................... 5
2.3 Supported Technology/Frequency Bands ....................................................................................... 5
2.4 Features ........................................................................................................................................... 7
2.5 Equipment list: ................................................................................................................................ 9
2.6 Technical Setup ............................................................................................................................. 10
2.7 Computer Setup............................................................................................................................. 11
2.8 Operating Modes ........................................................................................................................... 17
3. Safety Recommendations according to EN62368-1 ............................................................................ 19
4. RED/FCC/IC Regulatory Notices Modifications ................................................................................. 20
4.1 Modifications ................................................................................................................................ 20
4.2 Interference ................................................................................................................................... 20
4.3 FCC Class B Digital Device ......................................................................................................... 20
4.4 OEM Responsibilties .................................................................................................................... 21
________________________________________________________________________________________________________________________________
Page 4
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
1. INTRODUCTION
1.1 SCOPE
This document gives an overview about electrical, mechanical and functional details of the Valeo peiker
WMI 2 wireless charging modules.
1.2 AUDIENCE
Information to integrate the module in some other applications.
1.3 CONTACT INFORMATION, SUPPORT
peiker acustic GmbH
Max-Planck Street 32
D-61381 Friedrichsdorf / Ts.
Germany
http://www.peiker.de
info@peiker.de
________________________________________________________________________________________________________________________________
Page 5
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
2. PRODUCT OVERVIEW
2.1 PRODUCT VARIANTS
The WMI 2 module family consists of six variants:
Model-name Valeo Peiker product # Module configuration
WMI2-W167 2609-090-203-51 DAG trucks basic, with couple function
WMI2-W205 2609-090-303-51 DAG W205, with couple function
WMI2-W205-M1 2609-090-353-51 DAG W205, without couple function
WMI2-W167-M1 2609-090-403-51 DAG W167, with couple function
WMI2-W167-M2 2609-090-453-51 DAG W167, without couple function
WMI2-W167-M3 2609-090-553-51 DAG W167, fond variant without couple function
2.2 TECHNOLOGIES
Wireless charging equal to Qi Standard
Connecting to device via NFC
Proximity sensor description
-
The device is detected by a ping algorithm via NFC
2.3 SUPPORTED TECHNOLOGY/FREQUENCY BANDS
2.3.1 Frequencies
NFC 13,65 MHz
Magnetic, modulated, according Qi Standard 1.0 125 kHz
o Downlink (from cell-phone/test receiver to WMI)
the receiver is using load modulation of 125kHz modulated with 2kHz to send
information to the WMI.
o Uplink (from WMI to cell phone/test receiver)
The WMI is using frequency modulation of the 125kHz to send information to the
receiver.
o Concerning wireless charging there is no other communication channel.
2.3.2 Data Rates
CAN:
-
250kBaud
________________________________________________________________________________________________________________________________
Page 6
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
-
500kBaud
NFC:
-
Modulated 115kBaud
-
Modulated 230kBaud
-
Modulated 440kBaud
2.3.3 Interfaces, customizable
CAN
SPI (internal)
Contact information, Support
2.3.4 Power level
Charging mode
-
Max power consumption 9,25 Watts each coil
-
The device charge the mobile device with a power of 5 Watts
-
The transfer system includes 3 coils. This includes charging systems that have three coils and
clients that are able to detect and allow coupling only between individual pairs of coils
-
Only one coil is active
Ping mode
-
Max power consumption 0,25 Watts
2.3.5 Data Rates
CAN:
-
250kBaud
-
500kBaud
NFC:
-
Modulated 115kBaud
-
Modulated 230kBaud
-
Modulated 440kBaud
2.3.6 Dimension and Weight
- Dimensions: 160mm x 95mm x 27mm
- Weight < 395 grams
2.3.7 Application
Only vehicular environment
The system is installed only in vehicles
2.3.8 Power
Nominal voltage: 12V
Max. current consumption: 0,8A
Operating Voltage Range: 8V – 16V
________________________________________________________________________________________________________________________________
Page 7
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
2.4 FEATURES
2.4.1 FBS (exchange of relevant security information)
2.4.2 Charging
2.4.3 Couple Function, passiv only
- Powerful application processor from NXP may contain and run complete application software
and CAN-software
2.4.4 Supply Voltage
Absolute minimum/maximum supply voltages
8V – 16V
Nominal supply voltage
12V
Recommended supply voltage
12V
Voltage drop @ GSM power burst (33dBm)
< 100mV
2.4.5 Power Consumption
TA = +25°C, P = 9,25W
2.4.6 Environmental Specification
2.4.7 Temperature Range
Range
Operating temp. range
-20°C … +60°C
Wireless Charging
Extended operating temp. range
-20°C … +80°C
Operational
CAN communication
Storage temp. range
-40°C … +85°C
2.4.8 Connectors, external interfaces
The WMI is connected with a permanent 12V and the CAN bus, various control signals from the
CAN bus control the WMI and thus bring it into different working modes. In terms of driving
readiness, the WMI represents an interface between the head unit (Can with 250kBaud) and a
standard mobile phone from the driver of the vehicle. To support NFC telematics functions
including identification and data transmission to the vehicle head unit, for example for data
exchange with NFC vCards.
Loading...