Peiker acustic V1231 0, V1233 0 User Manual

V123x-0 (LTE-NAD-A)

User manual

Peiker product IDs: 2189-230-042-00 (V1230-0)

2189-231-042-00 (V1231-0)
2189-232-042-00 (V1232-0)

2189-233-042-00 (V1233-0)

Revision: 1.4
Date: August 2017

_______________________________________________________________________________________________________________ Seite 1

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

Date

Revision

Name

Comment

28.02.2017

1.0

mgi

Initial document based on V123x-1 documents

01.03.2017

1.1

phse

Some rewording as well as some corrections

06.03.2017

1.2

mgi

Model name changed to V123x-0

08.08.2017

1.3

phse

Renumbering of some sections
Added new section called “Maximum TX Output Power”

04.09.2017

1.4

phse

Updated the temp range table from section 2.12.1
Reworked section 6
Updated the pin-out table

Revision History

_______________________________________________________________________________________________________________ Seite 2

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

Content

1 Introduction .......................................................................................................................................... 4

1.1 Scope .................................................................................................................................................. 4

1.2 Audience ............................................................................................................................................ 4

1.3 Contact information, Support ......................................................................................................... 4

2 Product Overview ................................................................................................................................ 5

2.1 Product Variants ................................................................................................................................ 5

2.2 Supported Technology/Frequency Bands ..................................................................................... 5

2.3 Maximum TX Output Power ............................................................................................................ 5

2.5 Features ............................................................................................................................................. 6

2.6 Certifications / Approvals................................................................................................................. 7

2.8 Connectors ......................................................................................................................................... 7

2.8.1 Module Signal and RF Connectors .......................................................................................... 7

2.8.2 Ground and Heat Dissipation Connectors .............................................................................. 7

2.9 Main Interfaces ................................................................................................................................. 8

2.9.1 USB .............................................................................................................................................. 8

2.9.2 SIM Interface ............................................................................................................................. 8

2.9.3 Power on ..................................................................................................................................... 8

2.9.4 Reset ........................................................................................................................................... 8

2.9.5 GPIOs .......................................................................................................................................... 9

2.9.6 GSBIs ........................................................................................................................................... 9

2.9.7 Module Pin-out ......................................................................................................................... 10

2.10 Supply Voltage .............................................................................................................................. 15

2.11 Power Consumption ..................................................................................................................... 15

2.12 Environmental Specification ........................................................................................................ 16

2.12.1 Temperature Range .............................................................................................................. 16

3 Evaluation Kit ..................................................................................................................................... 17

4 AT Command interface ..................................................................................................................... 20

5 Safety Recommendations according to EN60950-1 ..................................................................... 22

6 RED/FCC/IC Regulatory Notices ...................................................................................................... 23

6.1 Modifications .............................................................................................................................. 23

6.2 Interference ................................................................................................................................ 23

6.3 FCC Class B Digital Device ....................................................................................................... 23

6.3 OEM Responsibilities ................................................................................................................. 24

7 List of Acronyms ................................................................................................................................ 25

_______________________________________________________________________________________________________________ Seite 3

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

1 Introduction

1.1 Scope

This document gives an overview about electrical, mechanical and functional details of the peiker LTE­NAD-A V123x-0 modules.

1.2 Audience

Information to integrate the module in some other applications.

1.3 Contact information, Support

peiker acustic GmbH & Co KG
Max-Planck Street 32
D-61381 Friedrichsdorf / Ts.
Germany

http://www.peiker.de
[e-mail]

_______________________________________________________________________________________________________________ Seite 4

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

2 Product Overview

2.1 Product Variants

The LTE-NAD-A module family consists of four regional variants:

Peiker product # Module configuration

2189-230-042-00 (V1230-0) ECE configuration
2189-231-042-00 (V1231-0) NA configuration
2189-232-042-00 (V1232-0) CHN configuration
2189-233-042-00 (V1233-0) RoW configuration

2.2 Supported Technology/Frequency Bands

V1230-0

GSM Bands 900MHz and 1800MHz
WCDMA Bands FDD1, FDD3 and FDD8
LTE Bands eFDD1, eFDD3, eFDD7, eFDD20, eFDD28A, eFDD32 and eTTD38

V1231-0

GSM Bands 850MHz and 1900MHz
WCDMA Bands FDD2, FDD4 and FDD5
LTE Bands eFDD2, eFDD4, eFDD5, eFDD7, eFDD12 and eFDD29

V1232-0

GSM Bands 900MHz and 1800MHz
WCDMA Bands FDD1 and FDD8
LTE Bands eFDD1, eFDD3, eFDD7, eTTD38, eTTD40 and eTTD41

V1233-0
GSM Bands 850MHz, 900MHz, 1800MHz and 1900MHz

WCDMA Bands FDD1, FDD2, FDD3, FDD5, FDD6, FDD8 and FDD19
LTE Bands eFDD1, eFDD3, eFDD5, eFDD7, eFDD8, eFDD9, eFDD19, eFDD21,

eFDD28B and eTTD40

2.3 Maximum TX Output Power

GSM 850 and GSM 900 (PCL=5, 1 UL TS): 34,5 dBm
GSM 1800 and GSM 1900 (PCL=5, 1 UL TS): 31,5 dBm

GPRS 850 and GPRS 900 (PCL=5, 4 UL TS): 29 dBm
GPRS 1800 and GPRS 1900 (PCL=0, 4 UL TS): 26 dBm

EDGE 850 and EDGE 900 (PCL=8, 4 UL TS): 23 dBm

_______________________________________________________________________________________________________________ Seite 5

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

Module

Host devices embedding this module variant

V1230-0

ATM-02-ECE-R1 and ATM-02-ECE-T1

V1231-0

ATM-02-US-R1 and ATM-02-US-T1

V1232-0

ATM-02-CHN-R1 and ATM-02-CHN-T1

V1233-0

ATM-02-ROW-R1 and ATM-02-ROW-T1

EDGE 1800 and EDGE 1900 (PCL=2, 4 UL TS): 22 dBm

WCDMA (all supported frequency bands): 25 dBm
LTE (all supported frequency bands): 25 dBm

2.4 Module to Hosts Mapping

The below table shows the mapping between the module variants and the host/ATM-02 devices:

2.5 Features

Features

- Same footprint and pin-out (all modules)

- Voice and data calls (all modules)

- IMS/VoLTE

- 4G: Rel-11, 3G/3G+: Rel-9, 2G: Rel-9

- DTM/eDTM (all modules)

- Standalone GPS, GLONASS, Galileo, SBAS, QZSS and BeiDou

Data rates

- GPRS/EDGE: Multislot class 33

- WCDMA: DL /UL up to 384kbps

HSPA+:

Category 24 in DL using 64 QAM and Dual-Cell; Up to 42 Mbps (All modules except
V1231-0)
Category 14 in DL using 64 QAM; Up to 21 Mbps (V1231-0)
Category 6 in UL using 16 QAM; Up to 5.76 Mbps (All modules)

- LTE Category 11: Up to 450 Mbps in DL using 3 CCs, up to 75 Mbps in UL (All modules)

Power Classes

- LTE: All supported bands, Power Class 3

- WCDMA: All supported bands, Power Class 3

- EDGE: 850/900/1800/1900, Power Class E2

- GSM/GPRS: 850/900, Power Class 4

- GSM/GPRS: 1800/1900, Power Class 1

Dimension and Weight

- Dimensions: 35mm x 38mm x 4,35mm

- Weight < 10 grams

_______________________________________________________________________________________________________________ Seite 6

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

GCF

RED

PTCRB

FCC/IC

AT&T

V1230-0

Planned

Planned

V1231-0

Planned

Planned

Planned

V1232-0

Planned

V1233-0

Planned

Planned

2.6 Certifications / Approvals

2.7 HW Features

- Qualcomm X12 LTE, 20nmSoC

- MDM9240 Baseband / PMIC: PMD9645 / WTR3925 WTR4905

- Cortex-A7 up to 1.2 GHz

- Modem and low power audio sub systems: QDSP6 processor at up to 850 MHz (turbo)

- RPM Resource and power manager: Cortex M3 up to 100 MHz

- 4Gb NAND Flash

- 2Gb LPDDR2 SDRAM

- 19.2MHz clock reference

- GPS, GLONASS, BeiDou, and Galileo

2.8 Connectors

2.8.1 Module Signal and RF Connectors

LTE-NAD-A has 172 signal pins (2xAA and 2xBB) connector pads with 1.0mm pitch. The signal pads are
located close to the board edges.

There are three antenna pads, each collocated by RF GND connectors

- Main transmit and receive antenna – pin LGA_PRX_ANT

- Diversity antenna for WCDMA respective MIMO antenna for LTE – pin LGA_DRX_ANT_IN

- GNSS antenna for both GPS and GLONASS – pin LGA_GPS_DRX_ANT

2.8.2 Ground and Heat Dissipation Connectors

To support the usage of module under complicated thermal conditions, there are a number of large
grounded pads in the center of PCB. These pads are dedicated ground pads to transfer heat dissipation
to a carrier board.

This should be especially considered by customer designs. A reference design showing landing patterns
and PCB stack-up is available on request.

_______________________________________________________________________________________________________________ Seite 7

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe

2.9 Main Interfaces

2.9.1 USB

LTE-NAD-A has one USB2.0 OTG high speed (480MBit) compliant interface including the PHY. This IF
consists of four signals:

- USB_HS_DP: USB Data Plus signal

- USB_HS_DM USB Data Minus signal

- USB_HS_ID: USB high-speed data - ID

- MDM_VBUS_DET: USB Voltage Supply

LTE-NAD-A has one USB3.0 high speed (480MBit) compliant interface including the PHY. This IF consists
of four signals:

- MDM_USB_SS_RX_P: USB 3.0 receive – plus

- MDM_USB_SS_RX_M USB 3.0 receive – minus

- MDM_USB_SS_TX_P: USB 3.0 transmit – plus

- MDM_USB_SS_TX_M: USB 3.0 transmit – minus

A dynamic reconfiguration between USB-Host or USB-Device is not foreseen. LTE-NAD-A can be
configured to USB-Host or USB-Device by insertion of a resistor on the USB_ID line.

2.9.2 SIM Interface

LTE-NAD-A has two SIM interfaces that are compatible for both 1.8V and 3V SIM Cards. Those IFs
consist of the following signals:

VREF_UIM1 / VREF_UIM2
UIM1_CLK / UIM2_CLK
UIM1_DETECT / UIM2_DETECT
UIM1_DATA / UIM2_DATA
UIM1_RESET / UIM2_RESET

The data rate of the SIM IF is up to 4 Mbps, so HW designers should take care of the length and routing
of the SIM IF to prevent potential EMC problems.

2.9.3 Power on

The signal PON_1 is used to switch on LTE-NAD-A. As PON_1 is pulled against VMAIN internally, it is
recommended to pull this input against GND using an open collector or open drain output only.

2.9.4 Reset

PMD_RESIN_N is used to reset LTE-NAD-A. As PMD_RES_IN is pulled against VMAIN internally, it is
recommended to pull this input against GND using an open collector or open drain output only.

_______________________________________________________________________________________________________________ Seite 8

peiker acustic GmbH & Co. KG, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897

phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369

Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer Ein Unternehmen der peiker Firmengruppe